⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 uip.c

📁 移植到440 下的uip
💻 C
📖 第 1 页 / 共 3 页
字号:
/** * \addtogroup uip * @{ *//** * \file * The uIP TCP/IP stack code. * \author Adam Dunkels <adam@dunkels.com> *//* * Copyright (c) 2001-2003, Adam Dunkels. * All rights reserved.  * * Redistribution and use in source and binary forms, with or without  * modification, are permitted provided that the following conditions  * are met:  * 1. Redistributions of source code must retain the above copyright  *    notice, this list of conditions and the following disclaimer.  * 2. Redistributions in binary form must reproduce the above copyright  *    notice, this list of conditions and the following disclaimer in the  *    documentation and/or other materials provided with the distribution.  * 3. The name of the author may not be used to endorse or promote *    products derived from this software without specific prior *    written permission.   * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.   * * This file is part of the uIP TCP/IP stack. * * $Id: uip.c,v 1.62.2.10 2003/10/07 13:23:01 adam Exp $ * *//*This is a small implementation of the IP and TCP protocols (as well assome basic ICMP stuff). The implementation couples the IP, TCP and theapplication layers very tightly. To keep the size of the compiled codedown, this code also features heavy usage of the goto statement.The principle is that we have a small buffer, called the uip_buf, inwhich the device driver puts an incoming packet. The TCP/IP stackparses the headers in the packet, and calls upon the application. Ifthe remote host has sent data to the application, this data is presentin the uip_buf and the application read the data from there. It is upto the application to put this data into a byte stream if needed. Theapplication will not be fed with data that is out of sequence.If the application whishes to send data to the peer, it should put itsdata into the uip_buf, 40 bytes from the start of the buffer. TheTCP/IP stack will calculate the checksums, and fill in the necessaryheader fields and finally send the packet back to the peer.*/#include "uip.h"#include "uipopt.h"#include "uip_arch.h"/*-----------------------------------------------------------------------------------*//* Variable definitions. *//* The IP address of this host. If it is defined to be fixed (by setting UIP_FIXEDADDR to 1 in uipopt.h), the address is set here. Otherwise, the address */#if UIP_FIXEDADDR > 0const u16_t uip_hostaddr[2] =  {HTONS((UIP_IPADDR0 << 8) | UIP_IPADDR1),   HTONS((UIP_IPADDR2 << 8) | UIP_IPADDR3)};const u16_t uip_arp_draddr[2] =  {HTONS((UIP_DRIPADDR0 << 8) | UIP_DRIPADDR1),   HTONS((UIP_DRIPADDR2 << 8) | UIP_DRIPADDR3)};const u16_t uip_arp_netmask[2] =  {HTONS((UIP_NETMASK0 << 8) | UIP_NETMASK1),   HTONS((UIP_NETMASK2 << 8) | UIP_NETMASK3)};#elseu16_t uip_hostaddr[2];       u16_t uip_arp_draddr[2], uip_arp_netmask[2];#endif /* UIP_FIXEDADDR */u8_t uip_buf[UIP_BUFSIZE+2];   /* The packet buffer that contains				incoming packets. */volatile u8_t *uip_appdata;  /* The uip_appdata pointer points to				application data. */volatile u8_t *uip_sappdata;  /* The uip_appdata pointer points to the				 application data which is to be sent. */#if UIP_URGDATA > 0volatile u8_t *uip_urgdata;  /* The uip_urgdata pointer points to				urgent data (out-of-band data), if				present. */volatile u8_t uip_urglen, uip_surglen;#endif /* UIP_URGDATA > 0 */volatile u16_t uip_len, uip_slen;                             /* The uip_len is either 8 or 16 bits,				depending on the maximum packet				size. */volatile u8_t uip_flags;     /* The uip_flags variable is used for				communication between the TCP/IP stack				and the application program. */struct uip_conn *uip_conn;   /* uip_conn always points to the current				connection. */struct uip_conn uip_conns[UIP_CONNS];                             /* The uip_conns array holds all TCP				connections. */u16_t uip_listenports[UIP_LISTENPORTS];                             /* The uip_listenports list all currently				listning ports. */#if UIP_UDPstruct uip_udp_conn *uip_udp_conn;struct uip_udp_conn uip_udp_conns[UIP_UDP_CONNS];#endif /* UIP_UDP */static u16_t ipid;           /* Ths ipid variable is an increasing				number that is used for the IP ID				field. */static u8_t iss[4];          /* The iss variable is used for the TCP				initial sequence number. */#if UIP_ACTIVE_OPENstatic u16_t lastport;       /* Keeps track of the last port used for				a new connection. */#endif /* UIP_ACTIVE_OPEN *//* Temporary variables. */volatile u8_t uip_acc32[4];static u8_t c, opt;static u16_t tmp16;/* Structures and definitions. */#define TCP_FIN 0x01#define TCP_SYN 0x02#define TCP_RST 0x04#define TCP_PSH 0x08#define TCP_ACK 0x10#define TCP_URG 0x20#define TCP_CTL 0x3f#define ICMP_ECHO_REPLY 0#define ICMP_ECHO       8     /* Macros. */#define BUF ((uip_tcpip_hdr *)&uip_buf[UIP_LLH_LEN])#define FBUF ((uip_tcpip_hdr *)&uip_reassbuf[0])#define ICMPBUF ((uip_icmpip_hdr *)&uip_buf[UIP_LLH_LEN])#define UDPBUF ((uip_udpip_hdr *)&uip_buf[UIP_LLH_LEN])#if UIP_STATISTICS == 1struct uip_stats uip_stat;#define UIP_STAT(s) s#else#define UIP_STAT(s)#endif /* UIP_STATISTICS == 1 */#if UIP_LOGGING == 1void uip_log(char *msg);#define UIP_LOG(m) uip_log(m)#else#define UIP_LOG(m)#endif /* UIP_LOGGING == 1 *//*-----------------------------------------------------------------------------------*/voiduip_init(void){  for(c = 0; c < UIP_LISTENPORTS; ++c) {    uip_listenports[c] = 0;  }  for(c = 0; c < UIP_CONNS; ++c) {    uip_conns[c].tcpstateflags = CLOSED;  }#if UIP_ACTIVE_OPEN  lastport = 1024;#endif /* UIP_ACTIVE_OPEN */#if UIP_UDP  for(c = 0; c < UIP_UDP_CONNS; ++c) {    uip_udp_conns[c].lport = 0;  }#endif /* UIP_UDP */    /* IPv4 initialization. */#if UIP_FIXEDADDR == 0  uip_hostaddr[0] = uip_hostaddr[1] = 0;#endif /* UIP_FIXEDADDR */}/*-----------------------------------------------------------------------------------*/#if UIP_ACTIVE_OPENstruct uip_conn *uip_connect(u16_t *ripaddr, u16_t rport){  register struct uip_conn *conn, *cconn;    /* Find an unused local port. */ again:  ++lastport;  if(lastport >= 32000) {    lastport = 4096;  }  /* Check if this port is already in use, and if so try to find     another one. */  for(c = 0; c < UIP_CONNS; ++c) {    conn = &uip_conns[c];    if(conn->tcpstateflags != CLOSED &&       conn->lport == htons(lastport)) {      goto again;    }  }  conn = 0;  for(c = 0; c < UIP_CONNS; ++c) {    cconn = &uip_conns[c];     if(cconn->tcpstateflags == CLOSED) {      conn = cconn;      break;    }    if(cconn->tcpstateflags == TIME_WAIT) {      if(conn == 0 ||	 cconn->timer > uip_conn->timer) {	conn = cconn;      }    }  }  if(conn == 0) {    return 0;  }    conn->tcpstateflags = SYN_SENT;  conn->snd_nxt[0] = iss[0];  conn->snd_nxt[1] = iss[1];  conn->snd_nxt[2] = iss[2];  conn->snd_nxt[3] = iss[3];  conn->initialmss = conn->mss = UIP_TCP_MSS;    conn->len = 1;   /* TCP length of the SYN is one. */  conn->nrtx = 0;  conn->timer = 1; /* Send the SYN next time around. */  conn->rto = UIP_RTO;  conn->sa = 0;  conn->sv = 16;  conn->lport = htons(lastport);  conn->rport = rport;  conn->ripaddr[0] = ripaddr[0];  conn->ripaddr[1] = ripaddr[1];    return conn;}#endif /* UIP_ACTIVE_OPEN *//*-----------------------------------------------------------------------------------*/#if UIP_UDPstruct uip_udp_conn *uip_udp_new(u16_t *ripaddr, u16_t lport,u16_t rport){  register struct uip_udp_conn *conn;    /* Find an unused local port. */ again:  ++lastport;  if(lastport >= 32000) {    lastport = 4096;  }    for(c = 0; c < UIP_UDP_CONNS; ++c) {    if(uip_udp_conns[c].lport == lastport) {      goto again;    }  }  conn = 0;  for(c = 0; c < UIP_UDP_CONNS; ++c) {    if(uip_udp_conns[c].lport == 0) {      conn = &uip_udp_conns[c];       break;    }  }  if(conn == 0) {    return 0;  }    conn->lport = HTONS(lport);  conn->rport = HTONS(rport);  conn->ripaddr[0] = ripaddr[0];  conn->ripaddr[1] = ripaddr[1];    return conn;}#endif /* UIP_UDP *//*-----------------------------------------------------------------------------------*/voiduip_unlisten(u16_t port){  for(c = 0; c < UIP_LISTENPORTS; ++c) {    if(uip_listenports[c] == port) {      uip_listenports[c] = 0;      return;    }  }}/*-----------------------------------------------------------------------------------*/voiduip_listen(u16_t port){  for(c = 0; c < UIP_LISTENPORTS; ++c) {    if(uip_listenports[c] == 0) {      uip_listenports[c] = port;      return;    }  }}/*-----------------------------------------------------------------------------------*//* XXX: IP fragment reassembly: not well-tested. */#if UIP_REASSEMBLY#define UIP_REASS_BUFSIZE (UIP_BUFSIZE - UIP_LLH_LEN)static u8_t uip_reassbuf[UIP_REASS_BUFSIZE];static u8_t uip_reassbitmap[UIP_REASS_BUFSIZE / (8 * 8)];static const u8_t bitmap_bits[8] = {0xff, 0x7f, 0x3f, 0x1f,				    0x0f, 0x07, 0x03, 0x01};static u16_t uip_reasslen;static u8_t uip_reassflags;#define UIP_REASS_FLAG_LASTFRAG 0x01static u8_t uip_reasstmr;#define IP_HLEN 20#define IP_MF   0x20static u8_tuip_reass(void){  u16_t offset, len;  u16_t i;  /* If ip_reasstmr is zero, no packet is present in the buffer, so we     write the IP header of the fragment into the reassembly     buffer. The timer is updated with the maximum age. */  if(uip_reasstmr == 0) {    memcpy(uip_reassbuf, &BUF->vhl, IP_HLEN);    uip_reasstmr = UIP_REASS_MAXAGE;    uip_reassflags = 0;    /* Clear the bitmap. */    memset(uip_reassbitmap, sizeof(uip_reassbitmap), 0);  }  /* Check if the incoming fragment matches the one currently present     in the reasembly buffer. If so, we proceed with copying the     fragment into the buffer. */  if(BUF->srcipaddr[0] == FBUF->srcipaddr[0] &&     BUF->srcipaddr[1] == FBUF->srcipaddr[1] &&     BUF->destipaddr[0] == FBUF->destipaddr[0] &&     BUF->destipaddr[1] == FBUF->destipaddr[1] &&     BUF->ipid[0] == FBUF->ipid[0] &&     BUF->ipid[1] == FBUF->ipid[1]) {    len = (BUF->len[0] << 8) + BUF->len[1] - (BUF->vhl & 0x0f) * 4;    offset = (((BUF->ipoffset[0] & 0x3f) << 8) + BUF->ipoffset[1]) * 8;    /* If the offset or the offset + fragment length overflows the       reassembly buffer, we discard the entire packet. */    if(offset > UIP_REASS_BUFSIZE ||       offset + len > UIP_REASS_BUFSIZE) {      uip_reasstmr = 0;      goto nullreturn;    }    /* Copy the fragment into the reassembly buffer, at the right       offset. */    memcpy(&uip_reassbuf[IP_HLEN + offset],	   (char *)BUF + (int)((BUF->vhl & 0x0f) * 4),	   len);          /* Update the bitmap. */    if(offset / (8 * 8) == (offset + len) / (8 * 8)) {      /* If the two endpoints are in the same byte, we only update	 that byte. */	           uip_reassbitmap[offset / (8 * 8)] |=	     bitmap_bits[(offset / 8 ) & 7] &	     ~bitmap_bits[((offset + len) / 8 ) & 7];    } else {      /* If the two endpoints are in different bytes, we update the	 bytes in the endpoints and fill the stuff inbetween with	 0xff. */      uip_reassbitmap[offset / (8 * 8)] |=	bitmap_bits[(offset / 8 ) & 7];      for(i = 1 + offset / (8 * 8); i < (offset + len) / (8 * 8); ++i) {	uip_reassbitmap[i] = 0xff;      }            uip_reassbitmap[(offset + len) / (8 * 8)] |=	~bitmap_bits[((offset + len) / 8 ) & 7];    }        /* If this fragment has the More Fragments flag set to zero, we       know that this is the last fragment, so we can calculate the       size of the entire packet. We also set the       IP_REASS_FLAG_LASTFRAG flag to indicate that we have received       the final fragment. */    if((BUF->ipoffset[0] & IP_MF) == 0) {      uip_reassflags |= UIP_REASS_FLAG_LASTFRAG;      uip_reasslen = offset + len;    }        /* Finally, we check if we have a full packet in the buffer. We do       this by checking if we have the last fragment and if all bits       in the bitmap are set. */    if(uip_reassflags & UIP_REASS_FLAG_LASTFRAG) {      /* Check all bytes up to and including all but the last byte in	 the bitmap. */      for(i = 0; i < uip_reasslen / (8 * 8) - 1; ++i) {	if(uip_reassbitmap[i] != 0xff) {	  goto nullreturn;	}      }      /* Check the last byte in the bitmap. It should contain just the	 right amount of bits. */      if(uip_reassbitmap[uip_reasslen / (8 * 8)] !=	 (u8_t)~bitmap_bits[uip_reasslen / 8 & 7]) {	goto nullreturn;      }      /* If we have come this far, we have a full packet in the	 buffer, so we allocate a pbuf and copy the packet into it. We	 also reset the timer. */      uip_reasstmr = 0;      memcpy(BUF, FBUF, uip_reasslen);      /* Pretend to be a "normal" (i.e., not fragmented) IP packet	 from now on. */      BUF->ipoffset[0] = BUF->ipoffset[1] = 0;      BUF->len[0] = uip_reasslen >> 8;      BUF->len[1] = uip_reasslen & 0xff;      BUF->ipchksum = 0;      BUF->ipchksum = ~(uip_ipchksum());      return uip_reasslen;    }  } nullreturn:  return 0;}#endif /* UIP_REASSEMBL *//*-----------------------------------------------------------------------------------*/static voiduip_add_rcv_nxt(u16_t n){  uip_add32(uip_conn->rcv_nxt, n);  uip_conn->rcv_nxt[0] = uip_acc32[0];  uip_conn->rcv_nxt[1] = uip_acc32[1];  uip_conn->rcv_nxt[2] = uip_acc32[2];  uip_conn->rcv_nxt[3] = uip_acc32[3];}/*-----------------------------------------------------------------------------------*/voiduip_process(u8_t flag){  register struct uip_conn *uip_connr = uip_conn;    uip_appdata = &uip_buf[40 + UIP_LLH_LEN];    /* Check if we were invoked because of the perodic timer fireing. */  if(flag == UIP_TIMER) {#if UIP_REASSEMBLY    if(uip_reasstmr != 0) {      --uip_reasstmr;    }#endif /* UIP_REASSEMBLY */    /* Increase the initial sequence number. */    if(++iss[3] == 0) {      if(++iss[2] == 0) {	if(++iss[1] == 0) {	  ++iss[0];	}      }    }        uip_len = 0;

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -