xsicpdrv.c

usb 检验程序

/******************************************************************************
**
**  COPYRIGHT (C) 2000, 2001 Intel Corporation.
**
**  This software as well as the software described in it is furnished under 
**  license and may only be used or copied in accordance with the terms of the 
**  license. The information in this file is furnished for informational use 
**  only, is subject to change without notice, and should not be construed as 
**  a commitment by Intel Corporation. Intel Corporation assumes no 
**  responsibility or liability for any errors or inaccuracies that may appear 
**  in this document or any software that may be provided in association with 
**  this document. 
**  Except as permitted by such license, no part of this document may be 
**  reproduced, stored in a retrieval system, or transmitted in any form or by 
**  any means without the express written consent of Intel Corporation. 
**
**  FILENAME:       xsicp.c
**
**  PURPOSE:        API functions for the Infrared Communication Port.
**
**  LAST MODIFIED:  $Modtime: 7/06/01 2:42p $
******************************************************************************/

/*
*******************************************************************************
*   HEADER FILES
*******************************************************************************
*/                                                                      
#include "systypes.h"
#define ICP_GLOBALS  1
#include "XsIcpDrv.h"
#include "XsCLkMgrDrv.h"
#include "XsUartDrv.h"
#include "UtilFunc.h"

/*
*******************************************************************************
*   GLOBAL DEFINITIONS
*******************************************************************************
*/

/*
*******************************************************************************
*   LOCAL DEFINITIONS
*******************************************************************************
*/

static IcpCfgT defaultIcpCfg = {
	IcpLoopbackOn,				// Enable loopback mode
	IcpRxOperation,				// Enable receive or transmit operation
	IcpTxFIFOUnderunNoInt,		// Ignore interrupt on Tx FIFO underrun
	IcpFIFOIntDisabled,			// Receive FIFO interrupt disabled
	IcpFIFOIntDisabled,			// Transmit FIFO interrupt disabled
	IcpAddressMatchDisabled,	// Address match disabled
    ICP_MATCH_ALL,				// Address match is not used, why bother 
    IcpRxFIFOTrgLevel32,		// Rx FIFO trigger level 32 bytes
//    IcpRxFIFOTrgLevel8,			// Rx FIFO trigger level 8 bytes
    IcpPinPolarityNonInvert,	// Tx pin polarity is not inverted 
    IcpPinPolarityNonInvert,    // Rx pin polarity is not inverted	 
};

/*
******************************************************************************************
*
* FUNCTION:             XsIcpHWSetup         
*
* DESCRIPTION:          This function is used for hardware initialization of ICP.
*                       It uses the ICP configuration structure to configure ICP's
*                       modes of operation.
*
* INPUT PARAMETERS:     ctxP  is a pointer to ICP's context structure
*
* RETURNS:              0    if successful
*                       UINT32  in case of error.
*
* GLOBAL EFFECTS:       none
*
* ASSUMPTIONS:          none
*
*******************************************************************************************
*/
UINT32 XsIcpDrv_HWSetup(volatile IcpRegsT * regsP, IcpCfgT * cfgP)
{   
    //volatile IcpRegsT * regsP = (IcpRegsT *)ctxP->regsP;
    //IcpCfgT * cfgP = (IcpCfgT *)ctxP->cfgP;
	UINT32 error = FALSE;
    UINT data;
	PVUINT GPSRy = (PVUINT)0x40e0001c;
	PVUINT GPDRy = (PVUINT)0x40e00010;
	PVUINT GAFR0y = (PVUINT)0x40e0005c;

	// Disable the peripheral clock bit for the STUART
	CLKMGR_DISABLE_CLK(CKEN_CK_STUART_OFS);

    // Clear any previous setup
	regsP->ICCR0 = 0;
	regsP->ICCR1 = 0;
	regsP->ICCR2 = 0;

	// Configure GPIOs 

	*GPSRy = 0x00008000;
	*GPDRy &= ~0x0000C000; 
	*GPDRy |= 0x00008000;
	*GAFR0y &= ~0xf0000000;
	*GAFR0y |= 0x90000000;

	//XsGpioSetIcp ();

	// Select the peripheral clock bit for the ICP
	CLKMGR_ENABLE_CLK(CKEN_CK_ICP_OFS);
	
	// Enable ICP unit
	regsP->ICCR0 |= ICP_ICCR0_ITR;
	
	// Select what action to take on transmit FIFO underrun
	if (cfgP->actionTxFIFOUnderrun == IcpTxFIFOUnderunNoInt)
	{
		// Transmit FIFO underrun causes CRC, stop flag, and 
		// SIR to be transmitted (TUR ignored)
		regsP->ICCR0 &= ~ICP_ICCR0_TUS; 
	}
	else
	{
		// Transmit FIFO underrun causes an abort to be transmitted
		// state of TUR sent to interrupt controller
		regsP->ICCR0 |= ICP_ICCR0_TUS; 
	}

	// Enable/disable address match function
	if (cfgP->enableAddressMatch == IcpAddressMatchDisabled)
	{
		// Disable receiver address match function
		regsP->ICCR0 &= ~ICP_ICCR0_AME;
	}
	else
	{
		// Enable receiver address match function
		regsP->ICCR0 |= ICP_ICCR0_AME;
		// Write the address match value to the ICCR1
		regsP->ICCR1 = cfgP->addressMatchValue & ICP_ICCR1_MASK;
	}

	// Select the receiver FIFO trigger level
	switch (cfgP->RxFIFOTrgLevel)
	{
		case IcpRxFIFOTrgLevel8: 
			regsP->ICCR2 |= ICP_ICCR2_TRIG_8BYTES;
			break;
		case IcpRxFIFOTrgLevel16: 
			regsP->ICCR2 |= ICP_ICCR2_TRIG_16BYTES;
			break;
		case IcpRxFIFOTrgLevel32: 
			regsP->ICCR2 |= ICP_ICCR2_TRIG_32BYTES;
			break;
		default:
			regsP->ICCR2 |= ICP_ICCR2_TRIG_8BYTES;
	}

	// Select Tx pin polarity
	if (cfgP->TxPinPolarity == IcpPinPolarityInvert)
	{
		// Data output from ICP is inverted 
		regsP->ICCR2 &= ~ICP_ICCR2_TXP;
	}
	else
	{
		// Data output from ICP is non-inverted 
		regsP->ICCR2 |= ICP_ICCR2_TXP;
	}

	// Select Rx pin polarity
	if (cfgP->RxPinPolarity == IcpPinPolarityInvert)
	{
		// Data input from receive data pin is inverted 
		regsP->ICCR2 &= ~ICP_ICCR2_RXP;
	}
	else
	{
		// Data input from receive data pin is non-inverted 
		regsP->ICCR2 |= ICP_ICCR2_RXP;
	}

	// Enable/disable receiver FIFO interrupt	
	if (cfgP->RxIntEnable == IcpFIFOIntDisabled)
	{
		// Receive FIFO does not generate an interrupt
		regsP->ICCR0 &= ~ICP_ICCR0_RIE;
	}
	else
	{
		// Receive FIFO generates an interrupt	
		regsP->ICCR0 |= ICP_ICCR0_RIE;
	}

	// Enable/disable transmitter FIFO interrupt	
	if (cfgP->TxIntEnable == IcpFIFOIntDisabled)
	{
		// Transmit FIFO does not generate an interrupt
		regsP->ICCR0 &= ~ICP_ICCR0_TIE;
	}
	else
	{
		// Transmit FIFO generates an interrupt	
		regsP->ICCR0 |= ICP_ICCR0_TIE;
	}

    // Make sure the Rx FIFO is empty
    //while (ctxP->readBitStatusReg1IcpFnP(ctxP, IcpRxNotEmpty))
    while (GET_BIT(&regsP->ICSR1, IcpRxNotEmpty))
        data = regsP->ICDR;

	// Enable/disable HSSP transmit and receive operations
	if (cfgP->loopback == IcpLoopbackOn)
	{
		// Loopback mode of operation enabled
		regsP->ICCR0 |= ICP_ICCR0_LBM; 

		// if loopback mode is enabled than enable both Tx and Rx operations
		regsP->ICCR0 |= (ICP_ICCR0_TXE | ICP_ICCR0_RXE);
	}
	else if ((cfgP->loopback == IcpLoopbackOff) && (cfgP->function == IcpRxOperation))
	{
		// Normal serial port operation enabled
		regsP->ICCR0 &= ~ICP_ICCR0_LBM;

	    // Enable ICP receive operation
		regsP->ICCR0 |= ICP_ICCR0_RXE;
	}
	else if ((cfgP->loopback == IcpLoopbackOff) && (cfgP->function == IcpTxOperation))
	{
		// Normal serial port operation enabled
		regsP->ICCR0 &= ~ICP_ICCR0_LBM; 

	    // Enable ICP transmit operation
		regsP->ICCR0 |= ICP_ICCR0_TXE;
	}

	return error;
}

/*
*******************************************************************************
*
* FUNCTION:         loopbackIcp                  
*
* DESCRIPTION:      This function is used to test ICP in loopback mode of operation.
*
* INPUT PARAMETERS: ctxP    is a pointer to ICP context structure. 
*                   data    is the data sent via loopback path.
*
* RETURNS:          INT  	data only max. 8 bit of data are significant).
*                           or -1 if timeout expired and no character has been received.
*
* GLOBAL EFFECTS:   none
*
* ASSUMPTIONS:      ICP's FIFO' Tx and Rx level interrupts are disabled, Tx and Rx units
*					are enabled, and loopback test mode is enabled
*
*******************************************************************************
*/
int XsIcpDrv_loopbackIcp(volatile IcpRegsT * regsP, INT data)
{
    //volatile IcpRegsT * regsP = (IcpRegsT *)ctxP->regsP;
    INT retry = ICP_RETRY_LOOP;

   	if ((regsP->ICSR1 & ICP_ICSR0_TFS) != 0)
	{
		// Check if Tx FIFO is not full
		while ((regsP->ICSR1 & ICP_ICSR1_TNF) == 0);

    	// Write data to the transmit FIFO
    	regsP->ICDR = data;   
    	Util_DelayUs(10);

    	// Wait for the loopback data to arrive
    	while (((regsP->ICSR1 & ICP_ICSR1_RNE) == 0) && (--retry > 0))
    		Util_DelayUs(1);
    }        
    
    if (retry > 0)
      return regsP->ICDR;
	
    return (-1);
}

/*
*******************************************************************************
*
* FUNCTION:         writeIcp                      
*
* DESCRIPTION:      This function is used to transmit data via ICP in polled mode
*                   operation
*
* INPUT PARAMETERS: ctxP    is a pointer to ICP context structure 
*                   txbufP  is a pointer to the buffer where the data is going 
*                           to be taken from
*                   len     is number of bytes to be sent
*
* RETURNS:          none.
*
* GLOBAL EFFECTS:   none.
*
* ASSUMPTIONS:      none.
*
*******************************************************************************
*/
void XsIcpDrv_writeIcp (volatile IcpRegsT * regsP, PCHAR txbufP, INT len)
{
    //volatile IcpRegsT * regsP = (IcpRegsT *)ctxP->regsP;
    INT i;
  
    for (i = 0; i < len; i++)
    {
		if ((regsP->ICSR1 & ICP_ICSR0_TFS) != 0)
		{
			// Check if Tx FIFO is not full
			while ((regsP->ICSR1 & ICP_ICSR1_TNF) == 0);

        	// Write data
        	regsP->ICDR = *txbufP++;   
    	}
	}
}

/*
*******************************************************************************
*
* FUNCTION:         readIcp        
*
* DESCRIPTION:      This function is used to receive data via Icp in polled mode 
*                   operation
*
* INPUT PARAMETERS: ctxP    is a pointer to ICP's context structure 
*                   rxbufP  is a pointer to the buffer where received data is
*                           going to be placed
*                   len     is a specified number of bytes to read.
*					timOut  is timeout value, -1 means wati for ever
*
* RETURNS:          INT an actual number of bytes have been read        
*                   
* GLOBAL EFFECTS:   none.
*                  
* ASSUMPTIONS:      none.
*                  
*******************************************************************************
*/                  
int XsIcpDrv_readIcp (volatile IcpRegsT * regsP, PCHAR rxbufP, INT len, int timeOut)
{
    //volatile IcpRegsT * regsP = (IcpRegsT *)ctxP->regsP;
	//INT retry = ICP_RETRY_LOOP;
	unsigned int retry = timeOut;
    INT i;
  
    for (i = 0; i < len; i++) 
    {
        // Wait for data to be available
//		while( ((regsP->ICSR1 & ICP_ICSR1_RNE) == 0) && (--retry > 0) )
    	while( 	((regsP->ICSR1 & ICP_ICSR1_RNE) == 0) && 
    			((--retry > 0) && (timeOut != -1))	)
    		Util_DelayUs(1);
    
    	if (retry > 0)
		{
      	  	*rxbufP++ = regsP->ICDR;
			//retry = ICP_RETRY_LOOP;
    	  	retry = timeOut;
		}
		else
		{
    	    break;
		}
	}

    if (retry > 0)
      return i;

    return (-1);
}


/*
*******************************************************************************
*
* FUNCTION:         clearRxIcp
*
* DESCRIPTION:      This function is used to clear receive FIFO of the Icp
*
* INPUT PARAMETERS: ctxP    is a pointer to the ICP's context structure
*
* RETURNS:          INT     a contence of the ICCR0
*
* GLOBAL EFFECTS:   none.
*
* ASSUMPTIONS:      none.
*
*******************************************************************************
*/
int XsIcpDrv_clearRxIcp (volatile IcpRegsT * regsP)
{
    //volatile IcpRegsT * regsP = (IcpRegsT *)ctxP->regsP;

    regsP->ICCR0 &= ~ICP_ICCR0_RXE;
    return regsP->ICCR0;
}

/*
*******************************************************************************
*
* FUNCTION:         clearTxIcp
*
* DESCRIPTION:      This function is used to clear transmit FIFO of the Icp
*
* INPUT PARAMETERS: ctxP    is a pointer to the ICP's context structure
*
* RETURNS:          INT     a contence of the ICCR0
*
* GLOBAL EFFECTS:   none.
*
* ASSUMPTIONS:      none.
*
*******************************************************************************
*/
int XsIcpDrv_clearTxIcp (volatile IcpRegsT * regsP)
{
    //volatile IcpRegsT * regsP = (IcpRegsT *)ctxP->regsP;

	regsP->ICCR0 &= ~ICP_ICCR0_TXE;
    return regsP->ICCR0;
}

/*
*******************************************************************************
*
* FUNCTION:         shutdownIcp
*
* DESCRIPTION:      This function is used to shutdown the Icp
*                   Tx and Rx FIFOs are cleared and SIU takes control of the data pins 
*
* INPUT PARAMETERS: ctxP    is a pointer to the ICP's context structure
*
* RETURNS:          INT     a contence of the ICCR0
*
* GLOBAL EFFECTS:   none.
*
* ASSUMPTIONS:      none.
*
*******************************************************************************
*/
int XsIcpDrv_shutdownIcp (volatile IcpRegsT * regsP)
{
    //volatile IcpRegsT * regsP = (IcpRegsT *)ctxP->regsP;

	regsP->ICCR0 &= ~ICP_ICCR0_TXE;
	regsP->ICCR0 &= ~ICP_ICCR0_RXE;

	// Disable ICP unit
	regsP->ICCR0 &= ~ICP_ICCR0_ITR;

	// Clear the peripheral clock bit for the ICP
	CLKMGR_DISABLE_CLK(CKEN_CK_ICP_OFS);

    return regsP->ICCR0;
}