ctbcs.h

读写Smart卡加解密接口的程序

/*
    CT-BCS commands, responses and parameters for terminals 
    without keypad and display.

    This file is part of the Unix driver for Towitoko smartcard readers
    Copyright (C) 1998 1999 2000 Carlos Prados <[e-mail]>

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
*/

#ifndef _CTBCS_
#define _CTBCS_

/*
 * Command and response size 
 */
#define CTBCS_MIN_COMMAND_SIZE		2
#define CTBCS_MIN_RESPONSE_SIZE		2

/*
 * Class byte of all CTBCS commands
 */
#define	CTBCS_CLA 			0x20

/*
 * Mandatory CT-BCS commands
 */
#define	CTBCS_INS_RESET			0x11	/* Reset CT */
#define	CTBCS_INS_REQUEST		0x12	/* Request ICC */
#define CTBCS_INS_STATUS		0x13	/* Get reader status */
#define CTBCS_INS_EJECT			0x15	/* Eject ICC */

/*
 * Additional CT-BCS commands
 */
#define CTBCS_INS_INPUT			0x16	/* Input from pin pad */
#define CTBCS_INS_OUTPUT		0x17	/* Output to pad pad display */
#define CTBCS_INS_PERFORM_VERIFICATION	0x18	/* Verify PIN from pin pad */
#define CTBCS_INS_MODIFY_VERIFICATION	0x19	/* Perform a change/unblock PIN op */

/* 
 * P1 parameter: functional units 
 */

#define CTBCS_P1_CT_KERNEL		0x00
#define CTBCS_P1_INTERFACE1		0x01
#define CTBCS_P1_INTERFACE2		0x02
#define CTBCS_P1_INTERFACE3		0x03
#define CTBCS_P1_INTERFACE4		0x04
#define CTBCS_P1_INTERFACE5		0x05
#define CTBCS_P1_INTERFACE6		0x06
#define CTBCS_P1_INTERFACE7		0x07
#define CTBCS_P1_INTERFACE8		0x08
#define CTBCS_P1_INTERFACE9		0x09
#define CTBCS_P1_INTERFACE10		0x0A
#define CTBCS_P1_INTERFACE11		0x0B
#define CTBCS_P1_INTERFACE12		0x0C
#define CTBCS_P1_INTERFACE13		0x0D
#define CTBCS_P1_INTERFACE14		0x0E
#define CTBCS_P1_DISPLAY		0x40
#define CTBCS_P1_KEYPAD			0x50

/*
 * P2 parameter for Reset CT: data to be returned
 */
#define CTBCS_P2_RESET_NO_RESP		0x00	/* Return no data */
#define CTBCS_P2_RESET_GET_ATR		0x01	/* Return complete ATR */
#define CTBCS_P2_RESET_GET_HIST		0x02	/* Return historical bytes */

/*
 * P2 parameter for Request ICC: data to be returned 
 */
#define CTBCS_P2_REQUEST_NO_RESP	0x00	/* Return no data */
#define CTBCS_P2_REQUEST_GET_ATR	0x01	/* Return complete ATR */
#define CTBCS_P2_REQUEST_GET_HIST	0x02	/* Return historical bytes */

/*
 * P2 parameter for Get status: TAG of data object to return
 */
#define CTBCS_P2_STATUS_MANUFACTURER	0x46	/* Return manufacturer DO */
#define CTBCS_P2_STATUS_ICC		0x80	/* Return ICC DO */

/*
 * P2 parameter for Input
 */
#define CTBCS_P2_INPUT_ECHO		0x01	/* Echo input on display */
#define CTBCS_P2_INPUT_ASTERISKS	0x02	/* Echo input as asterisks */

/*
 * Tags for paramaters to input, output et al.
 */
#define CTBCS_TAG_PROMPT		0x50
#define CTBCS_TAG_VERIFY_CMD		0x52
#define CTBCS_TAG_TIMEOUT		0x80

/*
 * PIN command control flags
 */
#define CTBCS_PIN_CONTROL_LEN_SHIFT	4
#define CTBCS_PIN_CONTROL_LEN_MASK	0x0F
#define CTBCS_PIN_CONTROL_ENCODE_ASCII	0x01

/*
 * General return codes
 */
#define CTBCS_SW1_OK			0x90	/* Command successful */
#define CTBCS_SW2_OK			0x00
#define CTBCS_SW1_WRONG_LENGTH		0x67	/* Wrong length */
#define CTBCS_SW2_WRONG_LENGTH		0x00
#define CTBCS_SW1_COMMAND_NOT_ALLOWED	0x69	/* Command not allowed */
#define CTBCS_SW2_COMMAND_NOT_ALLOWED	0x00
#define CTBCS_SW1_WRONG_PARAM		0x6A	/* Wrong parameters P1, P2 */
#define CTBCS_SW2_WRONG_PARAM		0x00
#define CTBCS_SW1_WRONG_INS		0x6D	/* Wrong Instruction */
#define CTBCS_SW2_WRONG_INS		0x00
#define CTBCS_SW1_WRONG_CLA		0x6E	/* Class not supported */
#define CTBCS_SW2_WRONG_CLA		0x00
#define CTBCS_SW1_ICC_ERROR		0x6F	/* ICC removed, defective or */
#define CTBCS_SW2_ICC_ERROR		0x00	/* no longer reacts */

/*
 * Return codes for Reset CT 
 */
#define CTBCS_SW1_RESET_CT_OK		0x90	/* Reset CT successful */
#define CTBCS_SW2_RESET_CT_OK		0x00
#define CTBCS_SW1_RESET_SYNC_OK		0x90	/* Synchoronous ICC, */
#define CTBCS_SW2_RESET_SYNC_OK		0x00	/* reset successful */
#define CTBCS_SW1_RESET_ASYNC_OK	0x90	/* Asynchoronous ICC, */
#define CTBCS_SW2_RESET_ASYNC_OK	0x01	/* reset successful */
#define CTBCS_SW1_RESET_ERROR		0x64	/* Reset not successful */
#define CTBCS_SW2_RESET_ERROR		0x00

/*
 * Return codes for Request ICC
 */
#define CTBCS_SW1_REQUEST_SYNC_OK 	0x90	/* Synchoronous ICC, */
#define CTBCS_SW2_REQUEST_SYNC_OK 	0x00	/* reset successful */
#define CTBCS_SW1_REQUEST_ASYNC_OK 	0x90	/* Asynchoronous ICC, */
#define CTBCS_SW2_REQUEST_ASYNC_OK 	0x01	/* reset successful */
#define CTBCS_SW1_REQUEST_NO_CARD	0x62	/* No card present */
#define CTBCS_SW2_REQUEST_NO_CARD	0x00
#define CTBCS_SW1_REQUEST_CARD_PRESENT 	0x62	/* Card already present */
#define CTBCS_SW2_REQUEST_CARD_PRESENT 	0x01
#define CTBCS_SW1_REQUEST_ERROR   	0x64	/* Reset not successful */
#define CTBCS_SW2_REQUEST_ERROR   	0x00
#define CTBCS_SW1_REQUEST_TIMER_ERROR	0x69	/* Timer not supported */
#define CTBCS_SW2_REQUEST_TIMER_ERROR	0x00

/*
 * Return codes for Eject ICC
 */
#define CTBCS_SW1_EJECT_OK              0x90    /* Command succesful, */
#define CTBCS_SW2_EJECT_OK              0x00
#define CTBCS_SW1_EJECT_REMOVED         0x90    /* Command succesful, */
#define CTBCS_SW2_EJECT_REMOVED         0x01    /* Card removed */
#define CTBCS_SW1_EJECT_NOT_REMOVED     0x62    /* Card not removed */
#define CTBCS_SW2_EJECT_NOT_REMOVED     0x00

/*
 * Data returned on Get Status command
 */
#define CTBCS_DATA_STATUS_NOCARD	0x00	/* No card present */
#define CTBCS_DATA_STATUS_CARD		0x01	/* Card present */
#define CTBCS_DATA_STATUS_CARD_CONNECT	0x05	/* Card present */

/*
 * Functions for building CTBCS commands
 */
int ctbcs_pin_cmd(struct sc_reader *, sc_slot_info_t *, struct sc_pin_cmd_data *);


#endif /* _CTBCS_ */