portdemo.m

本书是电子通信类的本科、研究生辅助教材

function [ret,x0,str]=portdemo(t,x,u,flag);
%PORTDEMO	is the M-file description of the SIMULINK system named PORTDEMO.
%	The block-diagram can be displayed by typing: PORTDEMO.
%
%	SYS=PORTDEMO(T,X,U,FLAG) returns depending on FLAG certain
%	system values given time point, T, current state vector, X,
%	and input vector, U.
%	FLAG is used to indicate the type of output to be returned in SYS.
%
%	Setting FLAG=1 causes PORTDEMO to return state derivitives, FLAG=2
%	discrete states, FLAG=3 system outputs and FLAG=4 next sample
%	time. For more information and other options see SFUNC.
%
%	Calling PORTDEMO with a FLAG of zero:
%	[SIZES]=PORTDEMO([],[],[],0),  returns a vector, SIZES, which
%	contains the sizes of the state vector and other parameters.
%		SIZES(1) number of states
%		SIZES(2) number of discrete states
%		SIZES(3) number of outputs
%		SIZES(4) number of inputs.
%	For the definition of other parameters in SIZES, see SFUNC.
%	See also, TRIM, LINMOD, LINSIM, EULER, RK23, RK45, ADAMS, GEAR.

%	Copyright (c) 1990-94 by The MathWorks, Inc.

% Note: This M-file is only used for saving graphical information;
%       after the model is loaded into memory an internal model
%       representation is used.

% the system will take on the name of this mfile: 
sys = mfilename;
new_system(sys)
simver(1.3)
if(0 == (nargin + nargout))
     set_param(sys,'Location',[18,106,282,357])
     open_system(sys)
end;
set_param(sys,'algorithm',		'Euler')
set_param(sys,'Start time',	'0.0')
set_param(sys,'Stop time',		'999999')
set_param(sys,'Min step size',	'0.01')
set_param(sys,'Max step size',	'0.1')
set_param(sys,'Relative error','1e-3')
set_param(sys,'Return vars',	'')

add_block('built-in/Sine Wave',[sys,'/','Sine Wave'])
set_param([sys,'/','Sine Wave'],...
		'position',[60,55,90,85])


%     Subsystem  'Composite with Outport'.

new_system([sys,'/','Composite with Outport'])
set_param([sys,'/','Composite with Outport'],'Location',[81,284,311,442])

add_block('built-in/Outport',[sys,'/','Composite with Outport/Outport'])
set_param([sys,'/','Composite with Outport/Outport'],...
		'position',[130,25,150,45])

add_block('built-in/White Noise',[sys,'/','Composite with Outport/White Noise'])
set_param([sys,'/','Composite with Outport/White Noise'],...
		'position',[40,20,70,50])
add_line([sys,'/','Composite with Outport'],[75,35;120,35])


%     Finished composite block 'Composite with Outport'.

set_param([sys,'/','Composite with Outport'],...
		'position',[60,150,90,200])

add_block('built-in/Note',[sys,'/','Connections'])
set_param([sys,'/','Connections'],...
		'position',[135,10,136,11])

add_block('built-in/Scope',[sys,'/','Scope'])
set_param([sys,'/','Scope'],...
		'Vgain','2.000000',...
		'Hgain','3.000000',...
		'Vmax','2.000000',...
		'Hmax','6.000000',...
		'Window',[322,139,565,284],...
		'position',[170,155,200,195])


%     Subsystem  'Composite with Inport'.

new_system([sys,'/','Composite with Inport'])
set_param([sys,'/','Composite with Inport'],'Location',[85,170,285,281])

add_block('built-in/Inport',[sys,'/','Composite with Inport/Inport'])
set_param([sys,'/','Composite with Inport/Inport'],...
		'position',[25,25,45,45])

add_block('built-in/Scope',[sys,'/','Composite with Inport/Scope'])
set_param([sys,'/','Composite with Inport/Scope'],...
		'Vgain','2.000000',...
		'Hgain','11.000000',...
		'Vmax','2.000000',...
		'Hmax','22.000000',...
		'Window',[318,414,559,558],...
		'position',[115,15,145,55])
add_line([sys,'/','Composite with Inport'],[50,35;105,35])


%     Finished composite block 'Composite with Inport'.

set_param([sys,'/','Composite with Inport'],...
		'position',[170,45,200,95])
add_line(sys,[95,70;160,70])
add_line(sys,[95,175;160,175])
% Return any arguments.
if (nargin | nargout)
	% Must use feval here to access system in memory
	if (nargin > 3)
		if (flag == 0)
			eval(['[ret,x0,str]=',sys,'(t,x,u,flag);'])
		else
			eval(['ret =', sys,'(t,x,u,flag);'])
		end
	else
		[ret,x0,str] = feval(sys);
	end
end