scsireg.h

<B>Digital的Unix操作系统VAX 4.2源码</B>

#define SPEED_VAL	0x00000004	/* Tape speed field is valid */

/*
 * The rest of the fields for expansion... Ie no bsr/fsr etc..
*/

struct tape_info {
	int tape_flags;		/* Flags for opts are valid and direction */
	int dens;		/* SCSI density code ie 1600bpi. QIC_150 etc */
	int blk_size;		/* For QIC fixed unit 512. 9 trk 0 (variable) */
	char tape_speed;	/* tape speed this is per density */
};


/* 
 * Flags for tape_opt_tab.opt_flags or disk_opt_tab
 * This flags are used in both disk and tape option tables
*/

#define MSEL_PLL_VAL		0x00000001	/* msel_pll is valid	*/
#define MSEL_BLKDL_VAL		0x00000002	/* msel_blkdl is valid	*/
#define MSEL_VUL_VAL		0x00000004	/* msel_vul is valid	*/
#define MSNS_ALLOCL_VAL		0x00000008	/* msns_allocl is valid	*/
#define RSNS_ALLOCL_VAL		0x00000010	/* rsns_allocl is valid	*/
#define BUF_MOD			0x00000020	/* Buffered mode */
#define PAGE_VAL		0x00000040	/* page_size is valid */

/*
 * what kind of unit are we.......tape type /disk type.
 * These flags are used in the tape_opt_tab.opt_flags
 * or  disk_opt_tab
*/
		/* TAPES */
#define SCSI_QIC	0x00010000	/* This is a QIC tape unit	*/
#define SCSI_9TRK	0x00020000	/* This is a 9 Track unit	*/

#define SCSI_8MM	0x00040000	/* This is an 8 millemeter tape */
#define SCSI_RDAT	0x00080000	/* This is an rdat tape		*/

		/* DISKS */
#define SCSI_REMOVAL	0x00010000	/* This is a removable disk 
						Not implemented	*/



#define NUM_DENS	0x4	/* Number of densities possible		*/

struct tape_opt_tab {
	int opt_flags; 		/* Direction flags ie qic 9trk etc... 	*/
	char msel_pll;		/* Mode select Parameter list lenght	*/ 
	char msel_blkdl;	/* Mode select block descriptor lenght	*/
	char msel_vul;		/* Mode select vendor unique lenght	*/
	char msns_allocl;	/* mode sense alloc. lenght		*/
	char rsns_allocl;	/* request sense alloc. lenght		*/
	char page_size;		/* SCSI 2 page size			*/
	char rserv1;		/* int boundary and future expansion	*/
	char rserv2;
	struct tape_info tape_info[NUM_DENS];	/* one for each of the possible
						 * densities
						*/
};

struct disk_opt_tab {
	int opt_flags; 		/* Direction flags ie etc... 	*/
	char msel_pll;		/* Mode select Parameter list lenght	*/ 
	char msel_blkdl;	/* Mode select block descriptor lenght	*/
	char msel_vul;		/* Mode select vendor unique lenght	*/
	char msns_allocl;	/* mode sense alloc. lenght		*/
	char rsns_allocl;	/* request sense alloc. lenght		*/
	char page_size;		/* SCSI 2 page size			*/
	char rserv1;		/* int boundary and future expansion	*/
	char rserv2;		/* for further expansion		*/
};


/*
 * SCSI device information table data
 * structure and bit definitions.
 */
struct scsi_devtab {
	char *name;		/* Name we match on */
	int namelen;		/* Length on which we match */
#define tapetype namelen	/* Tapes dont say what they are??? */
	char *sysname;		/* What we call it when we see it */
	int devtype;		/* Mask for class and type of device */
	struct size *disksize;	/* Partition table for disks */
	int probedelay;		/* Time (Usec) to wait after all this */
	int mspw;		/* Milliseconds per word for iostat */
	int flags;		/* Flags to drive probe */
	caddr_t *opt_tab;	/* Pointer to our option table (tapes/disks) */
};


/*
 * These flags control how the driver handles
 * the device (mostly in the probe routine).
 */

/*
 * Send a request sense command to the target after the inquiry.
 * The command status and the sense data are not checked.
 */
#define SCSI_REQSNS		0x00000001

/*
 * Issues the following sequence of commands after the inquiry:
 *	Test unit ready; if target ready, go to next target.
 *	If target not ready, send a start unit command.
 *	Wait 30 seconds for spin up (sample once/second).
 *	Send a read capacity command.
 */
#define SCSI_STARTUNIT		0x00000002

/*
 * Operate the target in synchronous data transfer mode if possible.
 */
#define SCSI_TRYSYNC		0x00000004

/*
 * Send a test unit ready command to the target after the inquiry.
 * The command status is not checked.
 */
#define SCSI_TESTUNITREADY	0x00000008

/*
 * Send a read capacity command to the target after the inquiry.
 * The command status and capacity data are not checked.
 */
#define SCSI_READCAPACITY	0x00000010

/*
 * For tapes only. Do not send the receive diagnostic results
 * command to the tape during the first open. This flag is for
 * SCSI tapes which do not support the receive diagnostic results
 * command. The TZ30 and TZK50 support receive diagnostic results,
 * so do not set the NODIAG flag for these tapes.
 */
#define SCSI_NODIAG		0x00000020

/*
 * For disks, including cdrom, only. Set the PF (page format)
 * bit when sending a mode select command to the target.
 */
#define	SCSI_MODSEL_PF		0x00000040

/*
 * For disks, not including cdrom, only. Set if the disk has
 * removable media, such as the RX23 floppy disk drive.
 */
#define	SCSI_REMOVABLE_DISK	0x00000080

/*
 * See sys/data/scsi_data.c.
 */
#define	SCSI_MODSEL_EXABYTE	0x00000100

/*
 * For hard disks. The driver reassigns the block if an ECC
 * correctable error occurs. Set this flag if the device does
 * not support the reassign block command. See sys/data/scsi_data.c
 * for examples, such as floppy disks and cdrom devices.
 */
#define	SCSI_NODBBR		0x00000200

/* DBBR state values and misc defines. */

#define BBR_READ	0	/* Read the bad block                        */
#define BBR_REASSIGN	1	/* Reassign the bad block                    */
#define BBR_WRITE	2	/* Write the bad block                       */

#define BBR_COUNT	3	/* number of retries for the BBR states      */

/*
 * SCSI error log data structures and definitions.
 */

#define	SZ_EL_VERS	2	/* SCSI error log packet version number */

/*
 * SCSI error log information flags.
 * These flags tell the scsi_logerr routine what type
 * of information to include in the error log packet.
 * The flags are included in the error log packet in the
 * info_flags field so UERF knows which fields are valid.
 */
#define	SZ_LOGCMD	0x01	  /* Log SCSI command packet (CDB)	      */
#define	SZ_LOGSTAT	0x02	  /* Log SCSI status byte		      */
#define	SZ_LOGMSG	0x04	  /* Log SCSI message byte		      */
#define	SZ_LOGSNS	0x08	  /* Log SCSI extended sense data	      */
#define	SZ_LOGREGS	0x10	  /* Log SCSI controller and DMA registers    */
#define	SZ_LOGBUS	0x20	  /* Log SCSI bus data (which IDs on the bus) */
#define	SZ_LOGSELST	0x40	  /* LOG SCSI select status for each target   */
#define	SZ_HARDERR	0x10000	  /* HARD error				      */
#define	SZ_SOFTERR	0x20000	  /* SOFT error				      */
#define	SZ_RETRYERR	0x40000	  /* RETRY error			      */
#define	SZ_ESMASK	0x70000	  /* Error severity mask		      */
#define	SZ_NCR5380	0x100000  /* Port type is NCR 5380 chip		      */
#define	SZ_DECSII	0x200000  /* Port type is DEC SII chip		      */
#define SZ_NCRASC	0x400000  /* Port type is NCR 53C94 (ASC)	      */

/*
 * SCSI error log error type definitions.
 */
#define	SZ_ET_DEVERR	0	/* Device error reported from szerror()       */
#define	SZ_ET_PARITY	1	/* SCSI bus parity error		      */
#define	SZ_ET_BUSRST	2	/* SCSI bus reset detected		      */
#define	SZ_ET_RSTBUS	3	/* Controller resetting SCSI bus	      */
#define	SZ_ET_RSTTARG	4	/* Controller resetting target		      */
#define	SZ_ET_CMDABRTD	5	/* Command aborted			      */
#define	SZ_ET_RESELERR	6	/* Reselect error			      */
#define	SZ_ET_STRYINTR	7	/* Stray interrupt			      */
#define	SZ_ET_SELTIMO	8	/* Selection timeout			      */
#define	SZ_ET_DISTIMO	9	/* Disk disconnect timeout		      */
#define	SZ_ET_CMDTIMO	10	/* Command timeout			      */
#define	SZ_ET_ACTSTAT	11	/* Activity status error		      */
#define	SZ_ET_BUSERR	12	/* SCSI bus protocol error		      */
#define	SZ_ET_DBBR	13	/* Dynamic Bad Block Replacement reporting    */

/*
 * NCR 5380 SCSI chip registers.
 *
 * We only log the readable registers.
 * The select enable register is not readable
 * so we keep a copy in the sz_softc structure.
 */
struct	reg_5380 {
	u_char	ini_cmd;	/* (rw) Initiator command register    */
	u_char	mode;		/* (rw) Mode register		      */
	u_char	tar_cmd;	/* (rw) Target command register	      */
	u_char	cur_stat;	/* (ro) Current bus status register   */
	u_char	sel_ena;	/* (wo) Select enable (soft copy)     */
	u_char	status;		/* (ro) Bus and status register	      */
	u_char	pad[2];		/*      Alignment, not needed, but... */
	u_long	adr;		/* (rw) DMA address register	      */
	u_long	cnt;		/* (rw) DMA count register	      */
	u_long	dir;		/* (rw) DMA direction register	      */
};

/*
 * SII chip registers.
 *
 * Only the meaningful registers are logged.
 */

struct	reg_sii {
	u_short	sii_sdb;	/* SCSI Data Bus and Parity		*/
	u_short	sii_sc1;	/* SCSI Control Signals One		*/
	u_short	sii_sc2;	/* SCSI Control Signals Two		*/
	u_short	sii_csr;	/* Control/Status register		*/
	u_short	sii_id;		/* Bus ID register			*/
	u_short	sii_slcsr;	/* Select Control and Status Register	*/
	u_short	sii_destat;	/* Selection Detector Status Register	*/
	u_short	sii_dstmo;	/* DSSI Timeout Register		*/
	u_short	sii_data;	/* Data Register			*/
	u_short	sii_dmctrl;	/* DMA Control Register			*/
	u_short	sii_dmlotc;	/* DMA Length of Transfer Counter	*/
	u_short	sii_dmaddrl;	/* DMA Address Register Low		*/
	u_short	sii_dmaddrh;	/* DMA Address Register High		*/
	u_short	sii_dmabyte;	/* DMA Initial Byte Register		*/
	u_short	sii_stlp;	/* DSSI Short Target List Pointer	*/
	u_short	sii_ltlp;	/* DSSI Long Target List Pointer	*/
	u_short	sii_ilp;	/* DSSI Initiator List Pointer		*/
	u_short	sii_dsctrl;	/* DSSI Control Register		*/
	u_short	sii_cstat;	/* Connection Status Register		*/
	u_short	sii_dstat;	/* Data Transfer Status Register	*/
	u_short	sii_comm;	/* Command Register			*/
	u_short	sii_dictrl;	/* Diagnostic Control Register		*/
	u_short	sii_clock;	/* Diagnostic Clock Register		*/
	u_short	sii_bhdiag;	/* Bus Handler Diagnostic Register	*/
	u_short	sii_sidiag;	/* SCSI IO Diagnostic Register		*/
	u_short	sii_dmdiag;	/* Data Mover Diagnostic Register	*/
	u_short	sii_mcdiag;	/* Main Control Diagnostic Register	*/
};


/*
 *	ASC Chip registers (read only)
 */

struct	reg_asc {
    u_char	tclsb;	/* Transfer Count LSB			*/
    u_char	tcmsb;	/* Transfer Count MSB			*/
    u_char	cmd;	/* Command register			*/
    u_char	stat;	/* Status register			*/
    u_char	ss;		/* Sequence Step register		*/
    u_char	intr;	/* Interrupt status register		*/
    u_char	ffr;	/* FIFO flags register			*/
    u_char	cnf1;	/* Configuration 1 register		*/
    u_char	cnf2;	/* Configuration 2 register		*/
    u_char	cnf3;	/* Configuration 3 register		*/


};	/* end reg_asc */


/*
 * Data structure for the SCSI portion of the error log packet.
 *
 * TODO:
 * Goal not to exceed mscp el packet size of 120 bytes
 * SII reg size may have blown above goal out of the water!
 */
struct	el_scsi {
	u_char	scsi_elvers;		/* SCSI error log packet version      */
	u_char	error_typ;		/* Error type code		      */
	u_char	suberr_typ;		/* Error sub-type code		      */
	u_char	scsi_id;		/* SCSI bus ID of target	      */
	u_char	bus_data;		/* SCSI bus data (which IDs on bus)   */
	u_char	scsi_status;		/* SCSI status byte		      */
	u_char	scsi_msgin;		/* SCSI message in byte		      */
	u_char	scsi_pad;		/* Place holder			      */
	int	info_flags;		/* Info fields valid flags	      */
	u_char	scsi_selst[NDPS];	/* Select status for each target      */
	u_char	scsi_cmd[12];		/* SCSI command packet (CDB)	      */
	struct	sz_exsns_dt scsi_esd;	/* SCSI extended sense data	      */
	union {
	    struct reg_sii  siiregs;	/* SII port registers		      */
	    struct reg_5380 ncrregs;	/* NCR 5380 port registers	      */
	    struct reg_asc  ascregs;	/* NCR 53C94 (ASC) port registers     */
	} scsi_regs;
	u_long	sect_num;		/* Sector number for disk errors      */
};

#endif 	SCSIREG_INCLUDE