hp.ti

<B>Digital的Unix操作系统VAX 4.2源码</B>

# # --------------------------------
#	@(#)hp.ti	4.1	(ULTRIX)	7/2/90
#
# hp: HEWLETT PACKARD
#
# Note: no "home" on HP's since that homes to top of memory, not screen.
# Due to 2621 limitations, the only way to get the arrow keys to
# transmit anything at all is to turn on the function key labels
# (f1-f8) with smkx, and even then the user has to hold down shift!
# The default 2621 turns off the labels except when it has to to enable
# the function keys.  If your installation prefers labels on all the time,
# or off all the time (at the "expense" of the function keys) move the
# 2621-nl or 2621-wl labels to the front using reorder.
# Note: there are newer ROM's for 2621's that allow you to set strap A
# so the regular arrow keys xmit \EA, etc, as with the 2645.  However,
# even with this strap set, the terminal stops xmitting if you reset it.
# Since I know of no way to set/unset
# the strap with an escape sequence, we don't use it in the default.
# If you like, you can use 2621-ba ("limited" arrow keys).
hp2621-ba|2621-ba|2621 w/new rom and strap A set,
	smkx@, rmkx@,
	kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\Eh, use=hp2621,
# 2621 with labels on all the time - normal outside vi, function inside vi.
hp2621-wl|2621-wl|2621|hp2621|hp 2621 w/labels,
	is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
# 2621 with function labels.  Most of the time they are off,
# but inside vi, the function key labels appear.  You have to
# hold down shift to get them to xmit.
hp2621-fl|2621|hp2621|hp2621a|2621a|2621-fl|2621A|hp 2621,
	is2=\E&j@\r, cbt=\Ei, cup=\E&a%p2%dc%p1%dY,
	dch1=\EP$<2>, ip=$<2>, pb#19200,
	smso=\E&dD, rmso=\E&d@, smul=\E&dD, rmul=\E&d@, sgr0=\E&d@, xhp@,
	khome=\Ep\r, kcuu1=\Et\r, kcub1=\Eu\r, kcuf1=\Ev\r, kcud1=\Ew\r,
	kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
	kf7=\Ev\r, kf8=\Ew\r, smkx=\E&jB, rmkx=\E&j@, ht=^I$<2>, xon, use=hp,
# To use 2621p printer, setenv TERM=2621p, PRINTER=2612p
hp2621p|2621p|2621P|hp 2621 with printer,
	mc5=\E&p11C, mc4=\E&p13C, use=2621,
# 2621k45: untested
2621k45|hp2621k45|k45|hp 2621 with 45 keyboard,
	kbs=^H, kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\Eh,
	smkx=\E&s1A, rmkx=\E&s0A, use=2621,
# This terminal should be used at 4800 baud or less.  It needs padding for
# plain characters at 9600, I guessed at an appropriate cr delay.
# It really wants ^E/^F handshaking, but that doesn't work well even if
# you write software to support it.
2645|hp2645|hp45|hp 264x series,
	dim=\E&dH, rev=\E&dB, smul=\E&dD, blink=\E&dA, sgr0=\E&d@,
	sgr=\E&d%'@'%?%p1%t%'B'%|%;%?%p2%t%'D'%|%;%?%p3%t%'B'%|%;%?%p4%t%'A'%|%;%?%p5%t%'H'%|%;%?%p6%t%'B'%|%;%c,
	kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\Eh,
	smkx=\E&s1A, rmkx=\E&s0A, knp=\EU, kpp=\EV, kri=\ET, kind=\ES,
	kil1=\EL, kdl1=\EM, kich1=\EQ, kdch1=\EP,
	kel=\EK, ked=\EJ, krmir=\ER, pb#9600, cr=^M$<20>, use=hp,
hp|hewlett-packard,
	tbc=\E3, hts=\E1, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EL, am, cub1=^H,
	ed=\EJ, el=\EK, hpa=\E&a%p1%dC, clear=\EH\EJ,
	cup=\E&a%p2%dc%p1%dY$<6>, cols#80, vpa=\E&a%p1%dY, lm#0, da, db,
	dch1=\EP, dl1=\EM, rmir=\ER, smir=\EQ, kbs=^H, lines#24, mir,
	cuf1=\EC, ht=^I, rmso=\E&d@, smso=\E&dJ,
	smul=\E&dD, rmul=\E&d@, cuu1=\EA, xhp, vt#6,
# The 2622 and 2623 are untested and based on telephone reports.
# Rumor has it they clear your tabs when you exit vi.
hp2622|hp2622a|2622|2622a|hp 2622,
	ed=\EJ, use=2626,
# The 2623 is a 2622 with extra graphics hardware.
hp2623|hp2623a|2623|2623a|hp 2623,
	use=2622,
# This entry does not use any of the fancy windowing stuff of the 2626.
# Indeed, terminfo does not yet handle such stuff.  Since changing any window
# clears memory, it is probably not possible to use this for screen opt.
# ed is incredibly slow most of the time - I am guessing at the exact padding.
# Since the terminal uses xoff/xon this is intended only for cost computation,
# so that the terminal will prefer el or even dl1 which is probably faster!
# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only extra slow
# on the last line of the window.  The padding probably should be changed.
hp2626|hp2626a|hp2626p|2626|2626a|2626p|2626A|2626P|hp 2626,
	dch1=\EP$<2>, ip=$<2>, rmso=\E&d@, smso=\E&dB, ed=\ED\EJ$<500>\EC,
	rev=\E&dB, smul=\E&dD, blink=\E&dA, invis=\E&dS, sgr0=\E&d@, rmul=\E&d@,
	sgr=\E&d%'@'%?%p1%t%'B'%|%;%?%p2%t%'D'%|%;%?%p3%t%'B'%|%;%?%p4%t%'A'%|%;%c,
	khome=\Eh, kcuu1=\EA, kcub1=\ED, kcuf1=\EC, kcud1=\EB,
	smkx=\E&s1A, rmkx=\E&s0A, knp=\EU, kpp=\EV, kri=\ET,
	kind=\ES, kil1=\EL, kdl1=\EM, kich1=\EQ, kdch1=\EP,
	kel=\EK, ked=\EJ, krmir=\ER,
	ind=\ES, ht=^I$<2>, xhp, use=2621,
# This entry is for sysline.  It allocates a 23 line window with a 115 line
# workspace for regular use, and a 1 line window for the status line.
# This assumes port 2 is being used.
# Turn off horizontal line, Create ws #1 with 115 lines,
# Create ws #2 with 1 line, Create window #1 lines 1-23,
# Create window #2 lines 24-24, Attach cursor to workspace #1.
# Note that this clears the tabs so it must be done by tset before
# it sets the tabs.
2626-s|hp 2626 using only 23 lines,
	tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC,
	fsl=\E&d@\E&w7f2p1I\E&w4f1I, eslok, hs,
	is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I
	\E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
	lines#23, use=2626,
# Force terminal back to 24 lines after being 23.
2626-ns|hp 2626 using all 24 lines,
	is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I
	\E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
	use=2626,
# Various entries useful for small windows on 2626.
2626-12,
	lines#12, use=2626,
2626-12x40,
	cols#40, lines#12, use=2626,
2626-x40,
	cols#40, use=2626,
2626-12-s,
	lines#11, use=2626-s,
# You should use this terminal at 4800 baud or less.
hp2648|hp2648a|2648a|2648A|2648|HP 2648a graphics terminal,
	clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
	dch1=\EP$<7>, ip=$<5>, use=2645,
# 2640a doesn't have the Y cursor addressing feature, and C is memory relative
# instead of screen relative, as we need.
2640|hp2640a|2640a|hp 2640a,
	cup@, smkx@, rmkx@, use=2645,
2640b|hp2640b|2644a|hp2644a|hp 264x series,
	smkx@, rmkx@, use=2645,
# 2621 using all 48 lines of memory, only 24 visible at any time.  Untested.
2621-48|48 line 2621,
	vpa=\E&a%p1%dR, lines#48, home=\EH, cup=\E&a%p2%dc%p1%dR, use=2621,
# 2621 with no labels ever.  Also prevents vi delays on escape.
hp2621-nl|2621-nl|2621|hp2621|hp 2621 with no labels,
	smkx@, rmkx@, khome@, kcuu1@, kcub1@, kcuf1@, kcud1@, use=hp2621-fl,
# Needed for UCB ARPAVAX console, since lsi-11 expands tabs (wrong).
hp2621-nt|2621-nt|hp 2621 w/no tabs,
	ht@, use=hp2621,