lpsmsg_string.h

<B>Digital的Unix操作系统VAX 4.2源码</B>

ERROR, LPS$_NONETMBX, 0, "Remote Server Management requires NETMBX privilege",
ERROR, LPS$_UNDERLEN, 0, "The minimum required terminal page length is 24 lines",
ERROR, LPS$_NOACTJOB, 0, "No job currently active on PrintServer",
ERROR, LPS$_RSMDISC, 0, "Error occurred - connection to PrintServer lost",
ERROR, LPS$_DECNETOFF, 0, "DECnet is off - Server management requires DECnet be on",
ERROR, LPS$_RSMNETERR, 0, "Unexpected network error",
WARN, LPS$_ATOPMN, 0, "Attempting to open menu file",
WARN, LPS$_EVTLOGDISAB, 0, "Event logging disabled - event log not initialized",
FATAL, LPS$_LJCEXPERR, 1, "Laps-Interrupt Process error, reason = %s",
ERROR, LPS$_INVFEAT, 0, "This feature is not available on this model printer.",
INFO, LPS$_IDLE, 0, "Idle",
INFO, LPS$_ACTIVE, 0, "Active",
WARN, LPS$_EXITSRVR, 0, "exitserver has been executed - permanent state may be changed",
ERROR, LPS$_FLUSHING, 0, "Rest of Job (to EOJ) will be ignored",
WARN, LPS$_DICTFULL, 1, "dictfull: No more room in dictionary - offending command is %s",
WARN, LPS$_DICTSTKOV, 0, "dictstackoverflow: Too many begins",
WARN, LPS$_DICTSTKUF, 0, "dictstackunderflow: Too many ends",
WARN, LPS$_EXECSTKOV, 1, "execstackoverflow: exec nesting is too deep - offending command is %s",
WARN, LPS$_INTERUPT, 0, "interrupt: The job has been interrupted",
WARN, LPS$_INVACC, 1, "invalidaccess: Attempt to access restricted object or capability - offending command is %s",
WARN, LPS$_INVEXIT, 0, "invalidexit: exit not in loop",
WARN, LPS$_INVFILACC, 1, "invalidfileaccess: Bad file access string - offending command is %s",
WARN, LPS$_INVFONT, 1, "invalidfont: Bad font name or dictionary - offending command is %s",
WARN, LPS$_INVREST, 1, "invalidrestore: Improper restore - offending command is %s",
WARN, LPS$_IOERROR, 1, "ioerror: System I/O error occurred - offending command is %s",
WARN, LPS$_LIMCHK, 1, "limitcheck: Implementation limit exceeded - offending command is %s",
WARN, LPS$_NOCURPT, 1, "nocurrentpoint: Path is empty - offending command is %s",
WARN, LPS$_RANGECHK, 1, "rangecheck: Argument out of bounds - offending command is %s",
WARN, LPS$_STKOFLO, 1, "stackoverflow: Operand stack overflow - offending command is %s",
WARN, LPS$_STKUFLO, 1, "stackunderflow: Operand stack underflow - offending command is %s",
WARN, LPS$_SYNERR, 1, "syntaxerror: Input ended in string or procedure body - offending command is %s",
WARN, LPS$_TIMOUT, 0, "timeout: Time limit exceeded",
WARN, LPS$_TYPCHK, 1, "typecheck: Argument of wrong type - offending command is %s",
WARN, LPS$_UNDEF, 1, "undefined: Name not known - offending command is %s",
WARN, LPS$_UNDFILNAM, 1, "undefinedfilename: File not found - offending command is %s",
WARN, LPS$_UNDEFRES, 1, "undefinedresult: Number overflow or underflow - offending command is %s",
WARN, LPS$_UNMATCH, 1, "unmatchedmark: Expected mark not on stack - offending command is %s",
WARN, LPS$_UNREGIST, 1, "unregistered: PostScript has encountered a system error - offending command is %s",
WARN, LPS$_VMERROR, 1, "VMerror: PostScript virtual memory exhausted - offending command is %s",
WARN, LPS$_CFGERROR, 2, "configurationerror: %s - offending command is %s",
WARN, LPS$_PSINCONSIST, 0, "PostScript controller state is inconsistent",
WARN, LPS$_PSQUITOPER, 0, "PostScript quit operator has been executed",
WARN, LPS$_PSFATALSYS, 1, "PostScript fatal error at PC %u",
INFO, LPS$_TRAYSFULL, 0, "Upper and lower output trays full",
INFO, LPS$_DLVLOWER, 0, "Output being delivered to lower tray",
INFO, LPS$_DLVUPPER, 0, "Output being delivered to upper tray",
INFO, LPS$_SWTCHUPPER, 0, "Lower output tray full, switching to upper",
INFO, LPS$_SWTCHLOWER, 0, "Upper output tray full, switching to lower",
SUCCESS, LPS$_PRNTREDY, 0, "Print Engine ready",
SUCCESS, LPS$_PRNTERRCORR, 0, "Print Engine error has been corrected",
INFO, LPS$_MAINT50K, 0, "Print Engine 50,000 page maintenance required",
INFO, LPS$_MAINT100K, 0, "Print Engine 100,000 page maintenance required",
INFO, LPS$_MAINT200K, 0, "Print Engine 200,000 page maintenance required",
INFO, LPS$_OILLOW, 0, "Print Engine oil supply low",
INFO, LPS$_TNRLOW, 0, "Print Engine toner supply low",
INFO, LPS$_WARMUP, 0, "Print Engine is in warmup state",
WARN, LPS$_EJECTJAM, 0, "Print Engine paper eject section is jammed",
WARN, LPS$_TRANSJAM, 0, "Print Engine transport section is jammed",
WARN, LPS$_UPTRAYJAM, 0, "Print Engine upper paper tray is jammed",
WARN, LPS$_LOTRAYJAM, 0, "Print Engine lower paper tray is jammed",
WARN, LPS$_LCITJAM, 0, "Print Engine large capacity paper tray is jammed",
WARN, LPS$_UPTRAYEMP, 0, "Print Engine upper paper tray is empty",
WARN, LPS$_LOTRAYEMP, 0, "Print Engine lower paper tray is empty",
WARN, LPS$_LCITEMP, 0, "Print Engine large capacity paper tray is empty",
WARN, LPS$_COVOPN, 0, "Print Engine cover is open",
WARN, LPS$_TNRMALADJ, 0, "Print Engine toner cartridge setting is incorrect",
WARN, LPS$_TRNMALADJ, 0, "Print Engine transport path setting is incorrect",
WARN, LPS$_FUSMALADJ, 0, "Print Engine fusing unit setting is incorrect",
WARN, LPS$_FDSTAKJAM, 0, "Face down stacker is jammed",
WARN, LPS$_FDSTAKFULL, 0, "Face down stacker is full",
WARN, LPS$_FDSTAKOPEN, 0, "Face down stacker cover is open",
WARN, LPS$_LCSTAKJAM, 0, "Large capacity stacker is jammed",
WARN, LPS$_LCSTAKFULL, 0, "Large capacity stacker is full",
WARN, LPS$_LCSTAKOPEN, 0, "Large capacity stacker cover is open",
WARN, LPS$_RESERVED1, 0, "BAD MESSAGE",
WARN, LPS$_RESERVED2, 0, "BAD MESSAGE",
WARN, LPS$_RESERVED3, 0, "BAD MESSAGE",
WARN, LPS$_RESERVED4, 0, "BAD MESSAGE",
WARN, LPS$_RESERVED5, 0, "BAD MESSAGE",
WARN, LPS$_RESERVED6, 0, "BAD MESSAGE",
WARN, LPS$_OFFLINE, 0, "Print Engine has gone off line",
WARN, LPS$_PRNOTRDY, 0, "Print Engine is not ready",
WARN, LPS$_TNREND, 0, "Print Engine toner supply is exhausted",
WARN, LPS$_LCITCOVOPEN, 0, "Large capacity tray cover is open",
ERROR, LPS$_PRHDWERR, 1, "Print Engine hardware error: %s",
ERROR, LPS$_PRUNKERR, 2, "Print Engine unknown error status: %u, %u",
FATAL, LPS$_POWERERR, 0, "Print Engine power supply unit error - FATAL ERROR",
FATAL, LPS$_DRIVEERR, 0, "Print Engine driving unit error - FATAL ERROR",
FATAL, LPS$_FUSINGERR, 0, "Print Engine fusing error - FATAL ERROR",
FATAL, LPS$_FEEDERR, 0, "Print Engine paper feed unit error - FATAL ERROR",
FATAL, LPS$_OPTICERR, 0, "Print Engine optical unit error - FATAL ERROR",
FATAL, LPS$_FDSTAKERR, 0, "Face down stacker unit error - FATAL ERROR",
FATAL, LPS$_LCSTAKERR, 0, "Large capacity stacker unit error - FATAL ERROR",
FATAL, LPS$_MBSTAKERR, 0, "Mailbox stacker unit error - FATAL ERROR",
FATAL, LPS$_DUPSTAKERR, 0, "Duplexer unit error - FATAL ERROR",
WARN, LPS$_PRSERVICE, 2, "Printer requires service: code = %u %u",
INFO, LPS$_MAINT20K, 0, "Print Engine 20,000 page maintenance required",
INFO, LPS$_MAINT80K, 0, "Print Engine 80,000 page maintenance required",
INFO, LPS$_MAINT300K, 0, "Print Engine 300,000 page maintenance required",
INFO, LPS$_ONLINE, 0, "Print Engine has gone online",
WARN, LPS$_DUPJAM, 0, "Duplexer unit is jammed",
WARN, LPS$_DUPOPEN, 0, "Duplexer cover is open",
WARN, LPS$_DUPUNSEAT, 0, "Duplexer paper path is not properly seated",
WARN, LPS$_FUSERUNSEAT, 0, "Fuser unit absent or improperly seated",
WARN, LPS$_CLEANUNSEAT, 0, "Cleaning unit absent or improperly seated",
WARN, LPS$_OPCUNSEAT, 0, "OPC drum absent or improperly seated",
WARN, LPS$_DEVUNSEAT, 0, "Developer unit absent or improperly seated",
WARN, LPS$_OUTCOVOPEN, 0, "Paper output cover is open",
WARN, LPS$_SIDECOVOPEN, 0, "Print engine side cover is open",
WARN, LPS$_UPTRAYOUT, 0, "Upper paper tray is missing or misaligned",
WARN, LPS$_LOTRAYOUT, 0, "Lower paper tray is missing or misaligned",
WARN, LPS$_LCSSHELFOUT, 0, "LCOS paper shelf is missing or misaligned",
WARN, LPS$_SIDEFULL, 0, "Side output tray full",
WARN, LPS$_UPFULL, 0, "Upper LCOT full",
WARN, LPS$_LOFULL, 0, "Lower LCOT full",
WARN, LPS$_ADJTRAY, 0, "Side tray not correctly positioned",
WARN, LPS$_NOTRAY, 0, "Unavailable paper destination selected",
WARN, LPS$_CLEANFULL, 0, "Cleaning unit full - needs replacement",
WARN, LPS$_REPLDRUM, 0, "OPC drum needs replacement",
WARN, LPS$_DENSADJUST, 0, "Image density adjustment required",
WARN, LPS$_UPWRONGMEDIA, 0, "Incorrect media in upper paper tray",
WARN, LPS$_LOWRONGMEDIA, 0, "Incorrect media in lower paper tray",
WARN, LPS$_LCWRONGMEDIA, 0, "Incorrect media in LCIT",
WARN, LPS$_WRONGMEDIA, 0, "Media incompatible with duplexer or output device",
WARN, LPS$_LCOTSMALL, 0, "Media too small for LCOS - going to top output tray",
WARN, LPS$_LCOTDIFF, 0, "Media differs from LCOS setting - going to top tray",
WARN, LPS$_DPXXJAM, 0, "Please clear paper jam caused by DPX transport station",
WARN, LPS$_DPXFJAM, 0, "Please clear paper jam caused by DPX feed path",
WARN, LPS$_FUSJAM, 0, "Please clear paper jam caused by fusing unit",
WARN, LPS$_LOXJAM, 0, "Please clear paper jam caused by lower transport station",
WARN, LPS$_UPXJAM, 0, "Please clear paper jam caused by upper transport station",
WARN, LPS$_MAINXJAM, 0, "Please clear paper jam caused by main transport station",
FATAL, LPS$_FSCALL, 0, "Call Field Service to correct error",
WARN, LPS$_TABJAM, 0, "Please clear paper jam caused by table unit",
WARN, LPS$_ERRJAM, 0, "Please clear paper jam caused by fatal engine error",
WARN, LPS$_COVJAM, 0, "Please clear paper jam caused by opened cover",
ERROR, LPS$_COMMOFLOW, 0, "Engine command buffer overflow -- reboot PrintServer",
ERROR, LPS$_COMMLOST, 0, "Communication with print engine lost -- reboot PrintServer",
WARN, LPS$_LOSTPATH, 0, "The current path may have been lost.",
WARN, LPS$_NOCOPYPG, 0, "'copypage' is not supported by multi-page layup.",
ERROR, LPS$_ZEROAREA, 0, "Layup definition margins result in no usable sheet area.",
ERROR, LPS$_NEGAREA, 0, "Layup definition margins overlap one another.",
WARN, LPS$_PPSGTNUP, 0, "Pages per sheet are greater than number up.  Pages per sheet set to number up.",
WARN, LPS$_FPGGTPPS, 0, "First page is greater than pages per sheet.  First page set to 1.",
WARN, LPS$_NOSETTRAY, 0, "Tray selection is not supported by multi-page layup.",
ERROR, LPS$_SIZNOTAVL, 2, "No %s size medium is loaded in %s.",
ERROR, LPS$_SIZNOTSUP, 2, "%s size medium is not supported by %s.",
ERROR, LPS$_SIZNOTRAY, 3, "%s size medium in not in the %s tray in %s.",
FATAL, LPS$_FTLDEVCTL, 2, "Fatal device control library problem.  Config error:  %s on %s",
INFO, LPS$_UPPRPGLIM, 0, "The upper page limit has been reached.  Remaining pages will be flushed.",
INFO, LPS$_TRAYSUBST, 2, "Output will be delivered to the %s tray on %s.",
ERROR, LPS$_TRYNOTRDY, 3, "%s tray on %s is %s.",
ERROR, LPS$_DPLXNOSUP, 1, "%s does not support duplex printing.",
ERROR, LPS$_TUMBNOSUP, 1, "%s does not support tumble printing.",
ERROR, LPS$_NOINPTRAY, 1, "Input tray selection not supported for %s.",
ERROR, LPS$_NOOUTTRAY, 2, "Output tray, '%s', not supported on %s.",
WARN, LPS$_BADLAYDEF, 2, "%s on line %s in layup definition.",
INFO, LPS$_PROLOGIS, 2, "Prologue %s, version %s",
INFO, LPS$_BADPASSWD, 0, "Bad password",
ERROR, LPS$_NODUPFACEUP, 1, "Duplex to 'face_up' output tray is not supported on %s",
ERROR, LPS$_NOONESDUP, 1, "One_sided_duplex is not supported on %s",
0, 0, 0, (char *) 0
};