📄 dvdsynth-scsi.h
字号:
/* This header file is in the public domain. */
#ifndef __DVDSYNTH_SCSI_H
#define __DVDSYNTH_SCSI_H
typedef struct { // 18 bytes, important fields marked with ***
unsigned char errorcode;
unsigned char segment_number;
unsigned char sense_key; // ***
unsigned char information[4];
unsigned char additional_length; // 0x0A
unsigned char command_specific[4];
unsigned char asc; // ***
unsigned char ascq; // ***
unsigned char field_replaceable_unit_code;
unsigned char sense_key_specific[3];
} SenseData;
#define SCSIOP_TEST_UNIT_READY 0x00
#define SCSIOP_REZERO_UNIT 0x01
#define SCSIOP_REWIND 0x01
#define SCSIOP_REQUEST_BLOCK_ADDR 0x02
#define SCSIOP_REQUEST_SENSE 0x03
#define SCSIOP_FORMAT_UNIT 0x04
#define SCSIOP_READ_BLOCK_LIMITS 0x05
#define SCSIOP_REASSIGN_BLOCKS 0x07
#define SCSIOP_INIT_ELEMENT_STATUS 0x07
#define SCSIOP_READ6 0x08
#define SCSIOP_RECEIVE 0x08
#define SCSIOP_WRITE6 0x0A
#define SCSIOP_PRINT 0x0A
#define SCSIOP_SEND 0x0A
#define SCSIOP_SEEK6 0x0B
#define SCSIOP_TRACK_SELECT 0x0B
#define SCSIOP_SLEW_PRINT 0x0B
#define SCSIOP_SEEK_BLOCK 0x0C
#define SCSIOP_PARTITION 0x0D
#define SCSIOP_READ_REVERSE 0x0F
#define SCSIOP_WRITE_FILEMARKS 0x10
#define SCSIOP_FLUSH_BUFFER 0x10
#define SCSIOP_SPACE 0x11
#define SCSIOP_INQUIRY 0x12
#define SCSIOP_VERIFY6 0x13
#define SCSIOP_RECOVER_BUF_DATA 0x14
#define SCSIOP_MODE_SELECT 0x15
#define SCSIOP_RESERVE_UNIT 0x16
#define SCSIOP_RELEASE_UNIT 0x17
#define SCSIOP_COPY 0x18
#define SCSIOP_ERASE 0x19
#define SCSIOP_MODE_SENSE6 0x1A
#define SCSIOP_START_STOP_UNIT 0x1B
#define SCSIOP_STOP_PRINT 0x1B
#define SCSIOP_LOAD_UNLOAD 0x1B
#define SCSIOP_RECEIVE_DIAGNOSTIC 0x1C
#define SCSIOP_SEND_DIAGNOSTIC 0x1D
#define SCSIOP_MEDIUM_REMOVAL 0x1E
#define SCSIOP_READ_FORMATTED_CAPACITY 0x23
#define SCSIOP_READ_CAPACITY 0x25
#define SCSIOP_READ 0x28
#define SCSIOP_WRITE 0x2A
#define SCSIOP_SEEK 0x2B
#define SCSIOP_LOCATE 0x2B
#define SCSIOP_POSITION_TO_ELEMENT 0x2B
#define SCSIOP_WRITE_VERIFY 0x2E
#define SCSIOP_VERIFY 0x2F
#define SCSIOP_SEARCH_DATA_HIGH 0x30
#define SCSIOP_SEARCH_DATA_EQUAL 0x31
#define SCSIOP_SEARCH_DATA_LOW 0x32
#define SCSIOP_SET_LIMITS 0x33
#define SCSIOP_READ_POSITION 0x34
#define SCSIOP_SYNCHRONIZE_CACHE 0x35
#define SCSIOP_COMPARE 0x39
#define SCSIOP_COPY_COMPARE 0x3A
#define SCSIOP_WRITE_DATA_BUFF 0x3B
#define SCSIOP_READ_DATA_BUFF 0x3C
#define SCSIOP_CHANGE_DEFINITION 0x40
#define SCSIOP_READ_SUBCHANNEL 0x42
#define SCSIOP_READ_TOC 0x43
#define SCSIOP_READ_HEADER 0x44
#define SCSIOP_PLAY_AUDIO 0x45
#define SCSIOP_PLAY_AUDIO_MSF 0x47
#define SCSIOP_PLAY_TRACK_INDEX 0x48
#define SCSIOP_PLAY_TRACK_RELATIVE 0x49
#define SCSIOP_PAUSE_RESUME 0x4B
#define SCSIOP_LOG_SELECT 0x4C
#define SCSIOP_LOG_SENSE 0x4D
#define SCSIOP_STOP_PLAY_SCAN 0x4E
#define SCSIOP_READ_DISK_INFORMATION 0x51
#define SCSIOP_READ_TRACK_INFORMATION 0x52
#define SCSIOP_MODE_SELECT10 0x55
#define SCSIOP_MODE_SENSE10 0x5A
#define SCSIOP_REPORT_LUNS 0xA0
#define SCSIOP_SEND_KEY 0xA3
#define SCSIOP_REPORT_KEY 0xA4
#define SCSIOP_MOVE_MEDIUM 0xA5
#define SCSIOP_LOAD_UNLOAD_SLOT 0xA6
#define SCSIOP_EXCHANGE_MEDIUM 0xA6
#define SCSIOP_SET_READ_AHEAD 0xA7
#define SCSIOP_READ12 0xA8
#define SCSIOP_READ_DVD_STRUCTURE 0xAD
#define SCSIOP_REQUEST_VOL_ELEMENT 0xB5
#define SCSIOP_SEND_VOLUME_TAG 0xB6
#define SCSIOP_READ_ELEMENT_STATUS 0xB8
#define SCSIOP_READ_CD_MSF 0xB9
#define SCSIOP_SCAN_CD 0xBA
#define SCSIOP_SET_CD_SPEED 0xBB
#define SCSIOP_PLAY_CD 0xBC
#define SCSIOP_MECHANISM_STATUS 0xBD
#define SCSIOP_READ_CD 0xBE
#define SCSIOP_INIT_ELEMENT_RANGE 0xE7
#define SRB_STATUS_PENDING 0x00
#define SRB_STATUS_SUCCESS 0x01
#define SRB_STATUS_ABORTED 0x02
#define SRB_STATUS_ABORT_FAILED 0x03
#define SRB_STATUS_ERROR 0x04
#define SRB_STATUS_BUSY 0x05
#define SRB_STATUS_INVALID_REQUEST 0x06
#define SRB_STATUS_INVALID_PATH_ID 0x07
#define SRB_STATUS_NO_DEVICE 0x08
#define SRB_STATUS_TIMEOUT 0x09
#define SRB_STATUS_SELECTION_TIMEOUT 0x0A
#define SRB_STATUS_COMMAND_TIMEOUT 0x0B
#define SRB_STATUS_MESSAGE_REJECTED 0x0D
#define SRB_STATUS_BUS_RESET 0x0E
#define SRB_STATUS_PARITY_ERROR 0x0F
#define SRB_STATUS_REQUEST_SENSE_FAILED 0x10
#define SRB_STATUS_NO_HBA 0x11
#define SRB_STATUS_DATA_OVERRUN 0x12
#define SRB_STATUS_UNEXPECTED_BUS_FREE 0x13
#define SRB_STATUS_PHASE_SEQUENCE_FAILURE 0x14
#define SRB_STATUS_BAD_SRB_BLOCK_LENGTH 0x15
#define SRB_STATUS_REQUEST_FLUSHED 0x16
#define SRB_STATUS_INVALID_LUN 0x20
#define SRB_STATUS_INVALID_TARGET_ID 0x21
#define SRB_STATUS_BAD_FUNCTION 0x22
#define SRB_STATUS_ERROR_RECOVERY 0x23
#define SRB_STATUS_NOT_POWERED 0x24
#define SRB_STATUS_AUTOSENSE_VALID 0x80
#define SCSISTAT_GOOD 0x00
#define SCSISTAT_CHECK_CONDITION 0x02
#define SCSISTAT_CONDITION_MET 0x04
#define SCSISTAT_BUSY 0x08
#define SCSISTAT_INTERMEDIATE 0x10
#define SCSISTAT_INTERMEDIATE_COND_MET 0x14
#define SCSISTAT_RESERVATION_CONFLICT 0x18
#define SCSISTAT_COMMAND_TERMINATED 0x22
#define SCSISTAT_QUEUE_FULL 0x28
#define SCSI_SENSE_NO_SENSE 0x00
#define SCSI_SENSE_RECOVERED_ERROR 0x01
#define SCSI_SENSE_NOT_READY 0x02
#define SCSI_SENSE_MEDIUM_ERROR 0x03
#define SCSI_SENSE_HARDWARE_ERROR 0x04
#define SCSI_SENSE_ILLEGAL_REQUEST 0x05
#define SCSI_SENSE_UNIT_ATTENTION 0x06
#define SCSI_SENSE_DATA_PROTECT 0x07
#define SCSI_SENSE_BLANK_CHECK 0x08
#define SCSI_SENSE_UNIQUE 0x09
#define SCSI_SENSE_COPY_ABORTED 0x0A
#define SCSI_SENSE_ABORTED_COMMAND 0x0B
#define SCSI_SENSE_EQUAL 0x0C
#define SCSI_SENSE_VOL_OVERFLOW 0x0D
#define SCSI_SENSE_MISCOMPARE 0x0E
#define SCSI_SENSE_RESERVED 0x0F
typedef unsigned int scsi_result_t;
#define MAKE_SCSIRESULT(srb_stat,targ_stat,sense_key,asc,ascq) \
(((scsi_result_t)((srb_stat) & 0x3F) << 25) | ((scsi_result_t)((targ_stat) & 0x3E) << 19) | ((scsi_result_t)((sense_key) & 0x0F) << 16) | ((scsi_result_t)((asc) & 0xFF) << 8) | (scsi_result_t)((ascq) & 0xFF))
#define SCSIRESULT_SRBSTAT(s) (((scsi_result_t)(s) >> 25) & 0x3F)
#define SCSIRESULT_TARGSTAT(s) (((scsi_result_t)(s) >> 19) & 0x3E)
#define SCSIRESULT_SENSE(s) ((scsi_result_t)(s) & 0xFFFFF)
#define SCSIRESULT_SENSEKEY(s) (((scsi_result_t)(s) >> 16) & 0x0F)
#define SCSIRESULT_ASC(s) (((scsi_result_t)(s) >> 8) & 0xFF)
#define SCSIRESULT_ASCQ(s) ((scsi_result_t)(s) & 0xFF)
#define MAKE_SCSIRESULT_ERROR(sense) ((SRB_STATUS_ERROR << 25) | (SCSISTAT_CHECK_CONDITION << 19) | (sense & 0xFFFFF))
#define SCSIRESULT_SUCCESS MAKE_SCSIRESULT(SRB_STATUS_SUCCESS,SCSISTAT_GOOD,0,0,0)
#define SCSIRESULT_INVALID_CDB MAKE_SCSIRESULT_ERROR(0x52400)
#define SCSIRESULT_ILLEGAL_COMMAND MAKE_SCSIRESULT_ERROR(0x52000)
#define SCSIRESULT_IS_SUCCESS(s) (((s) & 0xFFF00000) == SCSIRESULT_SUCCESS)
#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -