top.csf

一个测试端口测试程序

AUTO_SLD_HUB_ENTITY
{
	AUTO_INSERT_SLD_HUB_ENTITY = ENABLE;
	HUB_INSTANCE_NAME = sld_hub_inst;
	HUB_ENTITY_NAME = sld_hub;
}
DEFAULT_DEVICE_OPTIONS
{
	GENERATE_CONFIG_HEXOUT_FILE = OFF;
	GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON;
	GENERATE_CONFIG_JBC_FILE = OFF;
	GENERATE_CONFIG_JAM_FILE = OFF;
	GENERATE_CONFIG_ISC_FILE = OFF;
	GENERATE_CONFIG_SVF_FILE = OFF;
	GENERATE_JBC_FILE_COMPRESSED = ON;
	GENERATE_JBC_FILE = OFF;
	GENERATE_JAM_FILE = OFF;
	GENERATE_ISC_FILE = OFF;
	GENERATE_SVF_FILE = OFF;
	RESERVE_PIN = "AS INPUT TRI-STATED";
	RESERVE_ALL_UNUSED_PINS = "AS OUTPUT DRIVING GROUND";
	HEXOUT_FILE_COUNT_DIRECTION = UP;
	HEXOUT_FILE_START_ADDRESS = 0;
	GENERATE_HEX_FILE = OFF;
	GENERATE_RBF_FILE = OFF;
	GENERATE_TTF_FILE = OFF;
	RESERVE_RUNLU_AFTER_CONFIGURATION = OFF;
	RESERVE_SCE_AFTER_CONFIGURATION = OFF;
	RESERVE_SDO_AFTER_CONFIGURATION = OFF;
	RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED";
	RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = OFF;
	RESERVE_RDYNBUSY_AFTER_CONFIGURATION = OFF;
	RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = OFF;
	DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF;
	AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON;
	EPROM_USE_CHECKSUM_AS_USERCODE = OFF;
	FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
	MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
	STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
	APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
	STRATIX_CONFIGURATION_DEVICE = EPC2;
	FLEX10K_CONFIGURATION_DEVICE = EPC2;
	FLEX6K_CONFIGURATION_DEVICE = EPC1;
	MERCURY_CONFIGURATION_DEVICE = EPC2;
	EXCALIBUR_CONFIGURATION_DEVICE = EPC2;
	APEX20K_CONFIGURATION_DEVICE = EPC2;
	USE_CONFIGURATION_DEVICE = ON;
	ENABLE_INIT_DONE_OUTPUT = OFF;
	FLEX10K_ENABLE_LOCK_OUTPUT = OFF;
	ENABLE_DEVICE_WIDE_OE = OFF;
	ENABLE_DEVICE_WIDE_RESET = OFF;
	RELEASE_CLEARS_BEFORE_TRI_STATES = OFF;
	AUTO_RESTART_CONFIGURATION = OFF;
	ENABLE_VREFB_PIN = OFF;
	ENABLE_VREFA_PIN = OFF;
	SECURITY_BIT = OFF;
	USER_START_UP_CLOCK = OFF;
	APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	STRATIX_UPDATE_MODE = STANDARD;
	USE_CHECKSUM_AS_USERCODE = OFF;
	MAX7000_USE_CHECKSUM_AS_USERCODE = OFF;
	MAX7000_JTAG_USER_CODE = FFFFFFFF;
	FLEX10K_JTAG_USER_CODE = 7F;
	MERCURY_JTAG_USER_CODE = FFFFFFFF;
	APEX20K_JTAG_USER_CODE = FFFFFFFF;
	STRATIX_JTAG_USER_CODE = FFFFFFFF;
	RESERVE_NCEO_AFTER_CONFIGURATION = OFF;
	FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
	FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF;
	ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
	MAX7000_ENABLE_JTAG_BST_SUPPORT = ON;
	ENABLE_JTAG_BST_SUPPORT = OFF;
	CLOCK_DIVISOR = 1;
	CLOCK_FREQUENCY = "10 MHZ";
	CLOCK_SOURCE = INTERNAL;
	COMPRESSION_MODE = OFF;
}
CHIP(top)
{
	GENERATE_CONFIG_HEXOUT_FILE = OFF;
	GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON;
	GENERATE_CONFIG_JBC_FILE = OFF;
	GENERATE_CONFIG_JAM_FILE = OFF;
	GENERATE_CONFIG_ISC_FILE = OFF;
	GENERATE_CONFIG_SVF_FILE = OFF;
	GENERATE_JBC_FILE_COMPRESSED = ON;
	GENERATE_JBC_FILE = OFF;
	GENERATE_JAM_FILE = OFF;
	GENERATE_ISC_FILE = OFF;
	GENERATE_SVF_FILE = OFF;
	ADDRESS[0] : LOCATION = Pin_G17;
	ADDRESS[10] : LOCATION = Pin_A3;
	ADDRESS[11] : LOCATION = Pin_A4;
	ADDRESS[12] : LOCATION = Pin_C3;
	ADDRESS[13] : LOCATION = Pin_C1;
	ADDRESS[14] : LOCATION = Pin_D3;
	ADDRESS[15] : LOCATION = Pin_D2;
	ADDRESS[16] : LOCATION = Pin_C2;
	ADDRESS[17] : LOCATION = Pin_F3;
	ADDRESS[18] : LOCATION = Pin_B3;
	ADDRESS[19] : LOCATION = Pin_E3;
	ADDRESS[1] : LOCATION = Pin_A8;
	ADDRESS[2] : LOCATION = Pin_B8;
	ADDRESS[3] : LOCATION = Pin_A7;
	ADDRESS[4] : LOCATION = Pin_B7;
	ADDRESS[5] : LOCATION = Pin_B6;
	ADDRESS[6] : LOCATION = Pin_A6;
	ADDRESS[7] : LOCATION = Pin_A5;
	ADDRESS[8] : LOCATION = Pin_B5;
	ADDRESS[9] : LOCATION = Pin_B4;
	CLK : LOCATION = Pin_L6;
	DATA[0] : LOCATION = Pin_C4;
	DATA[10] : LOCATION = Pin_C5;
	DATA[11] : LOCATION = Pin_D6;
	DATA[12] : LOCATION = Pin_C6;
	DATA[13] : LOCATION = Pin_F9;
	DATA[14] : LOCATION = Pin_H10;
	DATA[15] : LOCATION = Pin_D7;
	DATA[16] : LOCATION = Pin_C7;
	DATA[17] : LOCATION = Pin_E9;
	DATA[18] : LOCATION = Pin_E10;
	DATA[19] : LOCATION = Pin_D9;
	DATA[1] : LOCATION = Pin_H11;
	DATA[20] : LOCATION = Pin_C8;
	DATA[21] : LOCATION = Pin_F10;
	DATA[22] : LOCATION = Pin_G11;
	DATA[23] : LOCATION = Pin_C9;
	DATA[24] : LOCATION = Pin_C10;
	DATA[25] : LOCATION = Pin_H12;
	DATA[26] : LOCATION = Pin_D10;
	DATA[27] : LOCATION = Pin_G12;
	DATA[28] : LOCATION = Pin_G13;
	DATA[29] : LOCATION = Pin_F11;
	DATA[2] : LOCATION = Pin_G10;
	DATA[30] : LOCATION = Pin_B11;
	DATA[31] : LOCATION = Pin_B10;
	DATA[3] : LOCATION = Pin_D8;
	DATA[4] : LOCATION = Pin_E7;
	DATA[5] : LOCATION = Pin_D4;
	DATA[6] : LOCATION = Pin_D5;
	DATA[7] : LOCATION = Pin_G9;
	DATA[8] : LOCATION = Pin_F8;
	DATA[9] : LOCATION = Pin_E8;
	NBYTE_ENABLE[0] : LOCATION = Pin_F5;
	NBYTE_ENABLE[1] : LOCATION = Pin_F2;
	NBYTE_ENABLE[2] : LOCATION = Pin_F4;
	NBYTE_ENABLE[3] : LOCATION = Pin_H5;
	NREAD : LOCATION = Pin_A2;
	NRESET : LOCATION = Pin_F12;
	NSELECT0_SRAM32 : LOCATION = Pin_E4;
	NSELECT1_SRAM32 : LOCATION = Pin_E2;
	NWRITE_SRAM32 : LOCATION = Pin_E6;
	RXD : LOCATION = Pin_W8;
	RXD_OSVIEW : LOCATION = Pin_F14;
	TXD : LOCATION = Pin_D15;
	TXD_OSVIEW : LOCATION = Pin_F13;
	RESERVE_ALL_UNUSED_PINS = "AS INPUT TRI-STATED";
	HEXOUT_FILE_COUNT_DIRECTION = UP;
	HEXOUT_FILE_START_ADDRESS = 0;
	GENERATE_HEX_FILE = ON;
	GENERATE_RBF_FILE = OFF;
	GENERATE_TTF_FILE = OFF;
	RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED";
	RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = OFF;
	RESERVE_RDYNBUSY_AFTER_CONFIGURATION = OFF;
	RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = OFF;
	DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF;
	AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON;
	EPROM_USE_CHECKSUM_AS_USERCODE = OFF;
	FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
	MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
	STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
	APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
	STRATIX_CONFIGURATION_DEVICE = EPC2;
	FLEX10K_CONFIGURATION_DEVICE = EPC2;
	FLEX6K_CONFIGURATION_DEVICE = EPC1;
	MERCURY_CONFIGURATION_DEVICE = EPC2;
	EXCALIBUR_CONFIGURATION_DEVICE = EPC2;
	APEX20K_CONFIGURATION_DEVICE = EPC2;
	USE_CONFIGURATION_DEVICE = ON;
	ENABLE_INIT_DONE_OUTPUT = OFF;
	FLEX10K_ENABLE_LOCK_OUTPUT = OFF;
	ENABLE_DEVICE_WIDE_OE = OFF;
	ENABLE_DEVICE_WIDE_RESET = OFF;
	RELEASE_CLEARS_BEFORE_TRI_STATES = OFF;
	AUTO_RESTART_CONFIGURATION = OFF;
	ENABLE_VREFB_PIN = OFF;
	ENABLE_VREFA_PIN = OFF;
	SECURITY_BIT = OFF;
	USER_START_UP_CLOCK = OFF;
	APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
	STRATIX_UPDATE_MODE = STANDARD;
	USE_CHECKSUM_AS_USERCODE = OFF;
	MAX7000_USE_CHECKSUM_AS_USERCODE = OFF;
	MAX7000_JTAG_USER_CODE = FFFFFFFF;
	FLEX10K_JTAG_USER_CODE = 7F;
	MERCURY_JTAG_USER_CODE = FFFFFFFF;
	APEX20K_JTAG_USER_CODE = FFFFFFFF;
	STRATIX_JTAG_USER_CODE = FFFFFFFF;
	RESERVE_NCEO_AFTER_CONFIGURATION = OFF;
	FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
	FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF;
	ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
	MAX7000_ENABLE_JTAG_BST_SUPPORT = ON;
	ENABLE_JTAG_BST_SUPPORT = OFF;
	CLOCK_DIVISOR = 1;
	CLOCK_FREQUENCY = "10 MHZ";
	CLOCK_SOURCE = INTERNAL;
	COMPRESSION_MODE = OFF;
	DEVICE_FILTER_SPEED_GRADE = 2;
	DEVICE_FILTER_PIN_COUNT = 484;
	DEVICE_FILTER_PACKAGE = FBGA;
	APEX20KE_DEVICE_IO_STANDARD = LVTTL;
	BASE_PIN_OUT_FILE_ON_SAMEFRAME_DEVICE = OFF;
	DEVICE = "EP20K200EFC484-2X";
}
COMPILER_SETTINGS
{
	DRC_FANOUT_EXCEEDING = 30;
	DRC_REPORT_FANOUT_EXCEEDING = ON;
	DRC_TOP_FANOUT = 50;
	DRC_REPORT_TOP_FANOUT = ON;
	RUN_DRC_DURING_COMPILATION = OFF;
	ADV_NETLIST_OPT_RETIME_CORE_AND_IO = ON;
	ADV_NETLIST_OPT_FIT_LE_DUPLICATION = OFF;
	ADV_NETLIST_OPT_FIT_LE_RETIME = OFF;
	ADV_NETLIST_OPT_SYNTH_GATE_RETIME = OFF;
	ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP = OFF;
	SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES = OFF;
	SMART_COMPILE_STRATIX_PLLS = OFF;
	RUN_TIMING_ANALYSES = ON;
	MERGE_HEX_FILE = OFF;
	FOCUS_ENTITY_NAME = |top;
	INITIAL_PLACEMENT_CONFIGURATION = 1;
	FINAL_PLACEMENT_OPTIMIZATION = AUTOMATICALLY;
	FAMILY = APEX20KE;
	DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2";
	DPRAM_32BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1";
	DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1";
	DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2";
	DPRAM_32BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "LOWER TO 1ESB UPPER TO 1";
	DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "MEGALAB COLUMN 1";
	DPRAM_DUAL_PORT_MODE_INPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2";
	DPRAM_32BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1";
	DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1";
	DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
	DPRAM_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
	DPRAM_WIDE_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3";
	DPRAM_DEEP_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3";
	DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB";
	DPRAM_SINGLE_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB";
	DPRAM_WIDE_MODE_OUTPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4ESB";
	DPRAM_DEEP_MODE_OUTPUT_EPXA4_10 = "MEGALAB COLUMN 3";
	DPRAM_DUAL_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
	DPRAM_SINGLE_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
	DPRAM_WIDE_MODE_INPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4";
	DPRAM_DEEP_MODE_INPUT_EPXA4_10 = "MEGALAB COLUMN 3";
	DPRAM_OTHER_SIGNALS_EPXA4_10 = "DEFAULT OTHER ROUTING OPTIONS";
	DPRAM_OUTPUT_EPXA4_10 = "DEFAULT OUTPUT ROUTING OPTIONS";
	DPRAM_INPUT_EPXA4_10 = "DEFAULT INPUT ROUTING OPTIONS";
	STRIPE_TO_PLD_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2";
	PLD_TO_STRIPE_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2";
	PROCESSOR_DEBUG_EXTENSIONS_EPXA4_10 = "MEGALAB COLUMN 2";
	STRIPE_TO_PLD_BRIDGE_EPXA4_10 = "MEGALAB COLUMN 1";
	FAST_FIT_COMPILATION = OFF;
	SIGNALPROBE_AUTO_ASSIGN = 0;
	SIGNALPROBE_COMPILATION = OFF;
	SIGNALPROBE_ROUTING = ALL_SIGNAL_PROBE;
	LOGICLOCK_FITTER_TYPE = OFF;
	OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING = ON;
	OPTIMIZE_TIMING = NORMAL_COMPILATION;
	COMPILATION_LEVEL = FULL;
	SAVE_DISK_SPACE = ON;
	SPEED_DISK_USAGE_TRADEOFF = NORMAL;
	LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT = OFF;
	SIGNALPROBE_ALLOW_OVERUSE = OFF;
}