⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 aix.c

📁 Netscape NSPR库源码
💻 C
字号:
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- *//*  * The contents of this file are subject to the Mozilla Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/MPL/ *  * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. *  * The Original Code is the Netscape Portable Runtime (NSPR). *  * The Initial Developer of the Original Code is Netscape * Communications Corporation.  Portions created by Netscape are  * Copyright (C) 1998-2000 Netscape Communications Corporation.  All * Rights Reserved. *  * Contributor(s): *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL"), in which case the provisions of the GPL are applicable  * instead of those above.  If you wish to allow use of your  * version of this file only under the terms of the GPL and not to * allow others to use your version of this file under the MPL, * indicate your decision by deleting the provisions above and * replace them with the notice and other provisions required by * the GPL.  If you do not delete the provisions above, a recipient * may use your version of this file under either the MPL or the * GPL. */#include "primpl.h"#ifdef AIX_HAVE_ATOMIC_OP_H#include <sys/atomic_op.h>PRInt32 _AIX_AtomicSet(PRInt32 *val, PRInt32 newval){    PRIntn oldval;    boolean_t stored;    oldval = fetch_and_add((atomic_p)val, 0);    do    {        stored = compare_and_swap((atomic_p)val, &oldval, newval);    } while (!stored);    return oldval;}  /* _AIX_AtomicSet */#endif /* AIX_HAVE_ATOMIC_OP_H */#if defined(AIX_TIMERS)#include <sys/time.h>static PRUint32 _aix_baseline_epoch;static void _MD_AixIntervalInit(void){    timebasestruct_t real_time;    read_real_time(&real_time, TIMEBASE_SZ);    (void)time_base_to_time(&real_time, TIMEBASE_SZ);    _aix_baseline_epoch = real_time.tb_high;}  /* _MD_AixIntervalInit */PRIntervalTime _MD_AixGetInterval(void){    PRIntn rv;    PRUint64 temp;    timebasestruct_t real_time;    read_real_time(&real_time, TIMEBASE_SZ);    (void)time_base_to_time(&real_time, TIMEBASE_SZ);    /* tb_high is in seconds, tb_low in 10(-9)seconds */    temp = 1000000000ULL * (PRUint64)(real_time.tb_high - _aix_baseline_epoch);    temp += (PRUint64)real_time.tb_low;  /* everything's 10(-9) seconds */    temp >>= 16;  /* now it's something way different */    return (PRIntervalTime)temp;}  /* _MD_AixGetInterval */PRIntervalTime _MD_AixIntervalPerSec(void){    return 1000000000ULL >> 16;  /* that's 15258, I think */}  /* _MD_AixIntervalPerSec */#endif /* defined(AIX_TIMERS) */#if !defined(PTHREADS_USER)#if defined(_PR_PTHREADS)/* * AIX 4.3 has sched_yield().  AIX 4.2 has pthread_yield(). * So we look up the appropriate function pointer at run time. */#include <dlfcn.h>int (*_PT_aix_yield_fcn)() = NULL;int _pr_aix_send_file_use_disabled = 0;void _MD_EarlyInit(void){    void *main_app_handle;	char *evp;    main_app_handle = dlopen(NULL, RTLD_NOW);    PR_ASSERT(NULL != main_app_handle);    _PT_aix_yield_fcn = (int(*)())dlsym(main_app_handle, "sched_yield");    if (!_PT_aix_yield_fcn) {        _PT_aix_yield_fcn = (int(*)())dlsym(main_app_handle,"pthread_yield");        PR_ASSERT(NULL != _PT_aix_yield_fcn);    }    dlclose(main_app_handle);	if (evp = getenv("NSPR_AIX_SEND_FILE_USE_DISABLED")) {		if (1 == atoi(evp))			_pr_aix_send_file_use_disabled = 1;	}#if defined(AIX_TIMERS)    _MD_AixIntervalInit();#endif}#else /* _PR_PTHREADS */void _MD_EarlyInit(void){#if defined(AIX_TIMERS)    _MD_AixIntervalInit();#endif}#endif /* _PR_PTHREADS */PRWord *_MD_HomeGCRegisters(PRThread *t, int isCurrent, int *np){#ifndef _PR_PTHREADS    if (isCurrent) {	(void) setjmp(CONTEXT(t));    }    *np = sizeof(CONTEXT(t)) / sizeof(PRWord);    return (PRWord *) CONTEXT(t);#else	*np = 0;	return NULL;#endif}#ifndef _PR_PTHREADSPR_IMPLEMENT(void)_MD_SET_PRIORITY(_MDThread *thread, PRUintn newPri){    return;}PR_IMPLEMENT(PRStatus)_MD_InitializeThread(PRThread *thread){	return PR_SUCCESS;}PR_IMPLEMENT(PRStatus)_MD_WAIT(PRThread *thread, PRIntervalTime ticks){    PR_ASSERT(!(thread->flags & _PR_GLOBAL_SCOPE));    _PR_MD_SWITCH_CONTEXT(thread);    return PR_SUCCESS;}PR_IMPLEMENT(PRStatus)_MD_WAKEUP_WAITER(PRThread *thread){    if (thread) {	PR_ASSERT(!(thread->flags & _PR_GLOBAL_SCOPE));    }    return PR_SUCCESS;}/* These functions should not be called for AIX */PR_IMPLEMENT(void)_MD_YIELD(void){    PR_NOT_REACHED("_MD_YIELD should not be called for AIX.");}PR_IMPLEMENT(PRStatus)_MD_CREATE_THREAD(    PRThread *thread,    void (*start) (void *),    PRThreadPriority priority,    PRThreadScope scope,    PRThreadState state,    PRUint32 stackSize){    PR_NOT_REACHED("_MD_CREATE_THREAD should not be called for AIX.");}#endif /* _PR_PTHREADS */#endif /* PTHREADS_USER *//* * NSPR 2.0 overrides the system select() and poll() functions. * On AIX 4.2, we use dlopen("/unix", RTLD_NOW) and dlsym() to get * at the original system select() and poll() functions. */#if !defined(AIX_RENAME_SELECT)#include <sys/select.h>#include <sys/poll.h>#include <dlfcn.h>static int (*aix_select_fcn)() = NULL;static int (*aix_poll_fcn)() = NULL;int _MD_SELECT(int width, fd_set *r, fd_set *w, fd_set *e, struct timeval *t){    int rv;    if (!aix_select_fcn) {        void *aix_handle;	aix_handle = dlopen("/unix", RTLD_NOW);	if (!aix_handle) {	    PR_SetError(PR_UNKNOWN_ERROR, 0);	    return -1;	}	aix_select_fcn = (int(*)())dlsym(aix_handle,"select");        dlclose(aix_handle);	if (!aix_select_fcn) {	    PR_SetError(PR_UNKNOWN_ERROR, 0);	    return -1;	}    }    rv = (*aix_select_fcn)(width, r, w, e, t);    return rv;}int _MD_POLL(void *listptr, unsigned long nfds, long timeout){    int rv;    if (!aix_poll_fcn) {        void *aix_handle;	aix_handle = dlopen("/unix", RTLD_NOW);	if (!aix_handle) {	    PR_SetError(PR_UNKNOWN_ERROR, 0);	    return -1;	}	aix_poll_fcn = (int(*)())dlsym(aix_handle,"poll");        dlclose(aix_handle);	if (!aix_poll_fcn) {	    PR_SetError(PR_UNKNOWN_ERROR, 0);	    return -1;	}    }    rv = (*aix_poll_fcn)(listptr, nfds, timeout);    return rv;}#else/* * In AIX versions prior to 4.2, we use the two-step rename/link trick. * The binary must contain at least one "poll" symbol for linker's rename * to work.  So we must have this dummy function that references poll(). */#include <sys/poll.h>void _pr_aix_dummy(){    poll(0,0,0);}#endif /* !defined(AIX_RENAME_SELECT) */#ifdef _PR_HAVE_ATOMIC_CAS#include "pratom.h"#define _PR_AIX_ATOMIC_LOCK	-1PR_IMPLEMENT(void)PR_StackPush(PRStack *stack, PRStackElem *stack_elem){PRStackElem *addr;boolean_t locked = TRUE;	/* Is it safe to cast a pointer to an int? */	PR_ASSERT(sizeof(int) == sizeof(PRStackElem *));	do {		while ((addr = stack->prstk_head.prstk_elem_next) ==											(PRStackElem *)_PR_AIX_ATOMIC_LOCK)			;		locked = _check_lock((atomic_p) &stack->prstk_head.prstk_elem_next,							(int) addr, _PR_AIX_ATOMIC_LOCK);	} while (locked == TRUE);	stack_elem->prstk_elem_next = addr;	_clear_lock((atomic_p)&stack->prstk_head.prstk_elem_next, (int)stack_elem);    return;}PR_IMPLEMENT(PRStackElem *)PR_StackPop(PRStack *stack){PRStackElem *element;boolean_t locked = TRUE;	/* Is it safe to cast a pointer to an int? */	PR_ASSERT(sizeof(int) == sizeof(PRStackElem *));	do {		while ((element = stack->prstk_head.prstk_elem_next) ==										(PRStackElem *) _PR_AIX_ATOMIC_LOCK)			;		locked = _check_lock((atomic_p) &stack->prstk_head.prstk_elem_next,							(int)element, _PR_AIX_ATOMIC_LOCK);	} while (locked == TRUE);	if (element == NULL) {		_clear_lock((atomic_p) &stack->prstk_head.prstk_elem_next, NULL);	} else {		_clear_lock((atomic_p) &stack->prstk_head.prstk_elem_next,										(int) element->prstk_elem_next);	}	return element;}#endif	/* _PR_HAVE_ATOMIC_CAS */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -