⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pprthred.h

📁 Netscape NSPR库源码
💻 H
字号:
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- *//*  * The contents of this file are subject to the Mozilla Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/MPL/ *  * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. *  * The Original Code is the Netscape Portable Runtime (NSPR). *  * The Initial Developer of the Original Code is Netscape * Communications Corporation.  Portions created by Netscape are  * Copyright (C) 1998-2000 Netscape Communications Corporation.  All * Rights Reserved. *  * Contributor(s): *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL"), in which case the provisions of the GPL are applicable  * instead of those above.  If you wish to allow use of your  * version of this file only under the terms of the GPL and not to * allow others to use your version of this file under the MPL, * indicate your decision by deleting the provisions above and * replace them with the notice and other provisions required by * the GPL.  If you do not delete the provisions above, a recipient * may use your version of this file under either the MPL or the * GPL. */#ifndef pprthred_h___#define pprthred_h___/*** API for PR private functions.  These calls are to be used by internal** developers only.*/#include "nspr.h"PR_BEGIN_EXTERN_C/*---------------------------------------------------------------------------** THREAD PRIVATE FUNCTIONS---------------------------------------------------------------------------*//*** Associate a thread object with an existing native thread.** 	"type" is the type of thread object to attach** 	"priority" is the priority to assign to the thread** 	"stack" defines the shape of the threads stack**** This can return NULL if some kind of error occurs, or if memory is** tight. This call invokes "start(obj,arg)" and returns when the** function returns. The thread object is automatically destroyed.**** This call is not normally needed unless you create your own native** thread. PR_Init does this automatically for the primordial thread.*/NSPR_API(PRThread*) PR_AttachThread(PRThreadType type,                                     PRThreadPriority priority,				     PRThreadStack *stack);/*** Detach the nspr thread from the currently executing native thread.** The thread object will be destroyed and all related data attached** to it. The exit procs will be invoked.**** This call is not normally needed unless you create your own native** thread. PR_Exit will automatially detach the nspr thread object** created by PR_Init for the primordial thread.**** This call returns after the nspr thread object is destroyed.*/NSPR_API(void) PR_DetachThread(void);/*** Get the id of the named thread. Each thread is assigned a unique id** when it is created or attached.*/NSPR_API(PRUint32) PR_GetThreadID(PRThread *thread);/*** Set the procedure that is called when a thread is dumped. The procedure** will be applied to the argument, arg, when called. Setting the procedure** to NULL effectively removes it.*/typedef void (*PRThreadDumpProc)(PRFileDesc *fd, PRThread *t, void *arg);NSPR_API(void) PR_SetThreadDumpProc(    PRThread* thread, PRThreadDumpProc dump, void *arg);/*** Get this thread's affinity mask.  The affinity mask is a 32 bit quantity** marking a bit for each processor this process is allowed to run on.** The processor mask is returned in the mask argument.** The least-significant-bit represents processor 0.**** Returns 0 on success, -1 on failure.*/NSPR_API(PRInt32) PR_GetThreadAffinityMask(PRThread *thread, PRUint32 *mask);/*** Set this thread's affinity mask.  **** Returns 0 on success, -1 on failure.*/NSPR_API(PRInt32) PR_SetThreadAffinityMask(PRThread *thread, PRUint32 mask );/*** Set the default CPU Affinity mask.***/NSPR_API(PRInt32) PR_SetCPUAffinityMask(PRUint32 mask);/*** Show status of all threads to standard error output.*/NSPR_API(void) PR_ShowStatus(void);/*** Set thread recycle mode to on (1) or off (0)*/NSPR_API(void) PR_SetThreadRecycleMode(PRUint32 flag);/*---------------------------------------------------------------------------** THREAD PRIVATE FUNCTIONS FOR GARBAGE COLLECTIBLE THREADS           ---------------------------------------------------------------------------*//* ** Only Garbage collectible threads participate in resume all, suspend all and ** enumeration operations.  They are also different during creation when** platform specific action may be needed (For example, all Solaris GC able** threads are bound threads).*//*** Same as PR_CreateThread except that the thread is marked as garbage** collectible.*/NSPR_API(PRThread*) PR_CreateThreadGCAble(PRThreadType type,				     void (*start)(void *arg),				     void *arg,				     PRThreadPriority priority,				     PRThreadScope scope,				     PRThreadState state,				     PRUint32 stackSize);/*** Same as PR_AttachThread except that the thread being attached is marked as ** garbage collectible.*/NSPR_API(PRThread*) PR_AttachThreadGCAble(PRThreadType type,					PRThreadPriority priority,					PRThreadStack *stack);/*** Mark the thread as garbage collectible.*/NSPR_API(void) PR_SetThreadGCAble(void);/*** Unmark the thread as garbage collectible.*/NSPR_API(void) PR_ClearThreadGCAble(void);/*** This routine prevents all other GC able threads from running. This call is needed by ** the garbage collector.*/NSPR_API(void) PR_SuspendAll(void);/*** This routine unblocks all other GC able threads that were suspended from running by ** PR_SuspendAll(). This call is needed by the garbage collector.*/NSPR_API(void) PR_ResumeAll(void);/*** Return the thread stack pointer of the given thread. ** Needed by the garbage collector.*/NSPR_API(void *) PR_GetSP(PRThread *thread);/*** Save the registers that the GC would find interesting into the thread** "t". isCurrent will be non-zero if the thread state that is being** saved is the currently executing thread. Return the address of the** first register to be scanned as well as the number of registers to** scan in "np".**** If "isCurrent" is non-zero then it is allowed for the thread context** area to be used as scratch storage to hold just the registers** necessary for scanning.**** This function simply calls the internal function _MD_HomeGCRegisters().*/NSPR_API(PRWord *) PR_GetGCRegisters(PRThread *t, int isCurrent, int *np);/*** (Get|Set)ExecutionEnvironent**** Used by Java to associate it's execution environment so garbage collector** can find it. If return is NULL, then it's probably not a collectable thread.**** There's no locking required around these calls.*/NSPR_API(void*) GetExecutionEnvironment(PRThread *thread);NSPR_API(void) SetExecutionEnvironment(PRThread* thread, void *environment);/*** Enumeration function that applies "func(thread,i,arg)" to each active** thread in the process. The enumerator returns PR_SUCCESS if the enumeration** should continue, any other value is considered failure, and enumeration** stops, returning the failure value from PR_EnumerateThreads.** Needed by the garbage collector.*/typedef PRStatus (PR_CALLBACK *PREnumerator)(PRThread *t, int i, void *arg);NSPR_API(PRStatus) PR_EnumerateThreads(PREnumerator func, void *arg);/* ** Signature of a thread stack scanning function. It is applied to every** contiguous group of potential pointers within a thread. Count denotes the** number of pointers. */typedef PRStatus (PR_CALLBACK *PRScanStackFun)(PRThread* t,			      void** baseAddr, PRUword count, void* closure);/*** Applies scanFun to all contiguous groups of potential pointers ** within a thread. This includes the stack, registers, and thread-local** data. If scanFun returns a status value other than PR_SUCCESS the scan** is aborted, and the status value is returned. */NSPR_API(PRStatus)PR_ThreadScanStackPointers(PRThread* t,                           PRScanStackFun scanFun, void* scanClosure);/* ** Calls PR_ThreadScanStackPointers for every thread.*/NSPR_API(PRStatus)PR_ScanStackPointers(PRScanStackFun scanFun, void* scanClosure);/*** Returns a conservative estimate on the amount of stack space left** on a thread in bytes, sufficient for making decisions about whether ** to continue recursing or not.*/NSPR_API(PRUword)PR_GetStackSpaceLeft(PRThread* t);/*---------------------------------------------------------------------------** THREAD CPU PRIVATE FUNCTIONS             ---------------------------------------------------------------------------*//*** Get a pointer to the primordial CPU.*/NSPR_API(struct _PRCPU *) _PR_GetPrimordialCPU(void);/*---------------------------------------------------------------------------** THREAD SYNCHRONIZATION PRIVATE FUNCTIONS---------------------------------------------------------------------------*//*** Create a new named monitor (named for debugging purposes).**  Monitors are re-entrant locks with a built-in condition variable.**** This may fail if memory is tight or if some operating system resource** is low.*/NSPR_API(PRMonitor*) PR_NewNamedMonitor(const char* name);/*** Test and then lock the lock if it's not already locked by some other** thread. Return PR_FALSE if some other thread owned the lock at the** time of the call.*/NSPR_API(PRBool) PR_TestAndLock(PRLock *lock);/*** Test and then enter the mutex associated with the monitor if it's not** already entered by some other thread. Return PR_FALSE if some other** thread owned the mutex at the time of the call.*/NSPR_API(PRBool) PR_TestAndEnterMonitor(PRMonitor *mon);/*** Return the number of times that the current thread has entered the** mutex. Returns zero if the current thread has not entered the mutex.*/NSPR_API(PRIntn) PR_GetMonitorEntryCount(PRMonitor *mon);/*** Just like PR_CEnterMonitor except that if the monitor is owned by** another thread NULL is returned.*/NSPR_API(PRMonitor*) PR_CTestAndEnterMonitor(void *address);/*---------------------------------------------------------------------------** PLATFORM-SPECIFIC THREAD SYNCHRONIZATION FUNCTIONS---------------------------------------------------------------------------*/#if defined(XP_MAC)NSPR_API(void) PR_Mac_WaitForAsyncNotify(PRIntervalTime timeout);NSPR_API(void) PR_Mac_PostAsyncNotify(PRThread *thread);#endif /* XP_MAC *//*---------------------------------------------------------------------------** PLATFORM-SPECIFIC INITIALIZATION FUNCTIONS---------------------------------------------------------------------------*/#if defined(IRIX)/*** Irix specific initialization funtion to be called before PR_Init** is called by the application. Sets the CONF_INITUSERS and CONF_INITSIZE** attributes of the shared arena set up by nspr.**** The environment variables _NSPR_IRIX_INITUSERS and _NSPR_IRIX_INITSIZE** can also be used to set these arena attributes. If _NSPR_IRIX_INITUSERS** is set, but not _NSPR_IRIX_INITSIZE, the value of the CONF_INITSIZE** attribute of the nspr arena is scaled as a function of the** _NSPR_IRIX_INITUSERS value.** ** If the _PR_Irix_Set_Arena_Params() is called in addition to setting the** environment variables, the values of the environment variables are used.** */NSPR_API(void) _PR_Irix_Set_Arena_Params(PRInt32 initusers, PRInt32 initsize);#endif /* IRIX *//* I think PR_GetMonitorEntryCount is useless. All you really want is this... */#define PR_InMonitor(m)		(PR_GetMonitorEntryCount(m) > 0)/*---------------------------------------------------------------------------** Special X-Lock hack for client---------------------------------------------------------------------------*/#ifdef XP_UNIXextern void PR_XLock(void);extern void PR_XUnlock(void);extern PRBool PR_XIsLocked(void);#endif /* XP_UNIX */PR_END_EXTERN_C#endif /* pprthred_h___ */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -