⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 _macos.h

📁 Netscape NSPR库源码
💻 H
📖 第 1 页 / 共 2 页
字号:
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- *//*  * The contents of this file are subject to the Mozilla Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/MPL/ *  * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. *  * The Original Code is the Netscape Portable Runtime (NSPR). *  * The Initial Developer of the Original Code is Netscape * Communications Corporation.  Portions created by Netscape are  * Copyright (C) 1998-2000 Netscape Communications Corporation.  All * Rights Reserved. *  * Contributor(s): *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL"), in which case the provisions of the GPL are applicable  * instead of those above.  If you wish to allow use of your  * version of this file only under the terms of the GPL and not to * allow others to use your version of this file under the MPL, * indicate your decision by deleting the provisions above and * replace them with the notice and other provisions required by * the GPL.  If you do not delete the provisions above, a recipient * may use your version of this file under either the MPL or the * GPL. */#ifndef prmacos_h___#define prmacos_h___//// This file contains all changes and additions which need to be made to the NSPR runtime // for the Macintosh platform (specifically the Metrowerks environment).  This file should // only be incluced in Macintosh builds.//#define PR_DLL_SUFFIX		""#define _PR_LOCAL_THREADS_ONLY#define _PR_NO_PREEMPT	1#define _PR_HAVE_ATOMIC_OPS 1#include "prinit.h"#include "prio.h"#include "prlong.h"#include "prlock.h"#include "prcvar.h"#include "prsem.h"#include "prthread.h"#include "prtime.h"#include "prproces.h"#if !defined(MAC_NSPR_STANDALONE)#include "macstdlibextras.h"#endif#include <stddef.h>#include <setjmp.h>#include <Errors.h>#include <OpenTransport.h>#include <DriverServices.h>#define _PR_HAVE_PEEK_BUFFER#define _PR_PEEK_BUFFER_MAX (16 * 1024)#define _PR_FD_NEED_EMULATE_MSG_PEEK(fd) 1struct _MDProcess {    PRInt8 notused;};struct _MDThread {    jmp_buf      jb;    int          osErrCode;	PRLock *     asyncIOLock;	PRCondVar *  asyncIOCVar;    PRBool       missedIONotify;    PRBool       missedAsyncNotify;    PRBool       asyncNotifyPending;};struct _MDThreadStack {    PRInt8 notused;};struct _MDLock {    PRInt8 notused;};struct _MDCVar {    PRInt8 notused;};struct _MDSemaphore {    PRInt8 notused;};struct _MDSegment {    PRInt8 notused;};struct _MDCPU {    AbsoluteTime    lastThreadSwitch;    AbsoluteTime    lastWakeUpProcess;    PRBool          trackScheduling;};typedef struct _MDSocketCallerInfo {	PRThread *	thread;	void *		cookie;} _MDSocketCallerInfo;struct _MDFileDesc {    PRInt32         osfd;    PRPackedBool    orderlyDisconnect;    PRPackedBool    readReady;    PRPackedBool    writeReady;    PRPackedBool    exceptReady;    PRLock *        miscLock;    /* Server sockets: listen bit tells the notifier func what to do */    PRBool          doListen;    /* stored error for non-blocking connects, as a Unix-style error code */    OTReason        disconnectError;    _MDSocketCallerInfo  misc;    _MDSocketCallerInfo  read;    _MDSocketCallerInfo  write;};/*** Iinitialization Related definitions*/#define _MD_EARLY_INIT		_MD_EarlyInit#define _MD_FINAL_INIT		_MD_FinalInit/*** Interrupts Related definitions*/#define _MD_GET_INTSOFF()               (_pr_intsOff)#define _MD_INTSOFF(_is)                                  \    PR_BEGIN_MACRO                                        \        ENTER_CRITICAL_REGION();                          \        (_is) = _PR_MD_GET_INTSOFF();                     \        _PR_MD_SET_INTSOFF(1);                            \        LEAVE_CRITICAL_REGION();                          \    PR_END_MACRO#if TARGET_CARBONextern void _MD_SetIntsOff(PRInt32 ints);#define _MD_SET_INTSOFF(_val)           _MD_SetIntsOff(_val)#else /* not TARGET_CARBON */#define _MD_SET_INTSOFF(_val)           (_pr_intsOff = _val)#endif /* TARGET_CARBON */#define _MD_START_INTERRUPTS			_MD_StartInterrupts#define _MD_STOP_INTERRUPTS	    		_MD_StopInterrupts#define _MD_BLOCK_CLOCK_INTERRUPTS()#define _MD_UNBLOCK_CLOCK_INTERRUPTS()#define _MD_DISABLE_CLOCK_INTERRUPTS()#define _MD_ENABLE_CLOCK_INTERRUPTS()/*** CPU Related definitions*/#define _MD_PAUSE_CPU		_MD_PauseCPU#define _MD_CLEANUP_BEFORE_EXIT()#define _MD_EXIT(status)	exit(status)#define _MD_INIT_CPUS()#define _MD_INIT_RUNNING_CPU(cpu) _MD_InitRunningCPU(cpu)/*** Process Related definitions*/extern struct PRProcess * _MD_CreateProcess(    const char *path,    char *const *argv,    char *const *envp,    const PRProcessAttr *attr);#define _MD_CREATE_PROCESS _MD_CreateProcessextern PRStatus _MD_DetachProcess(PRProcess *process);#define _MD_DETACH_PROCESS _MD_DetachProcessextern PRStatus _MD_WaitProcess(PRProcess *process, PRInt32 *exitCode);#define _MD_WAIT_PROCESS _MD_WaitProcessextern PRStatus _MD_KillProcess(PRProcess *process);#define _MD_KILL_PROCESS _MD_KillProcess/*** Memory Segments Related definitions*/#define _MD_INIT_SEGS()/*** Thread Stacks Debugging Related definitions*/#define _MD_INIT_STACK		_MD_InitStack#define _MD_CLEAR_STACK		_MD_ClearStack/*** Locks Related definitions*/#define _MD_INIT_LOCKS()#define _MD_NEW_LOCK(lock) (PR_SUCCESS)#define _MD_FREE_LOCK(lock)#define _MD_LOCK(lock)#define _MD_UNLOCK(lock)/*** Thread Related definitions*/NSPR_API(PRThread *) PR_GetPrimaryThread();#if defined(powerc) || defined(__powerc)#define _MD_GET_PC(_t) (*((PRUint32 *)((_t)->md.jb)))#define _MD_GET_SP(_t) (*((PRUint32 *)((_t)->md.jb) + 2))#define _MD_GET_TOC(_t) (*((PRUint32 *)((_t)->md.jb) + 3))#define INIT_STACKPTR(stackTop) ((unsigned char*)stackTop - 128)#define PR_NUM_GCREGS 70#else#define _MD_GET_PC(_t) (*((PRUint32 *)((_t)->md.jb) + 6))#define _MD_GET_SP(_t) (*((PRUint32 *)((_t)->md.jb) + 12))#define INIT_STACKPTR(stackTop) ((unsigned char*)stackTop - 4)#define PR_NUM_GCREGS 13#endif#define _MD_DEFAULT_STACK_SIZE (58 * 1024)#define _MD_MINIMUM_STACK_SIZE (58 * 1024)/*** Initialize the thread machine dependent data structure*/extern PRStatus _MD_InitThread(PRThread *thread);#define _MD_INIT_THREAD	_MD_InitThread/*** Clean-up the thread machine dependent data structure*/#define	_MD_CLEAN_THREAD(_thread)						\    PR_BEGIN_MACRO				      					\	PR_DestroyCondVar(_thread->md.asyncIOCVar);			\	PR_DestroyLock(_thread->md.asyncIOLock);			\    PR_END_MACRO/*** Initialize the thread context preparing it to execute _main.** *sp = 0 zeros out the sp for the first stack frame so that** stack walking code can find the top of the stack.*/#if defined(powerc) || defined(__powerc)#define _MD_INIT_CONTEXT(_thread, _sp, _main, _status)	\    PR_BEGIN_MACRO				      					\ 	unsigned char *sp;									\ 	unsigned long *tvect;								\	long **jb = (_thread)->md.jb;		      			\    *((PRBool *)_status) = PR_TRUE;              		\	(void) setjmp(jb);			      					\    sp = INIT_STACKPTR(_sp);							\    *sp = 0;                                            \    (_MD_GET_SP(_thread)) = (long) sp;   				\	tvect = (unsigned long *)_main;						\    (_MD_GET_PC(_thread)) = (int) *tvect;   			\    (_MD_GET_TOC(_thread)) = (int) *(tvect+1);   		\	_thread->no_sched = 0;                              \    PR_END_MACRO#else#define _MD_INIT_CONTEXT(_thread, _sp, _main, _status)	\    PR_BEGIN_MACRO				      					\ 	unsigned char *sp;									\	long **jb = (_thread)->md.jb;		      			\    *((PRBool *)_status) = PR_TRUE;              		\	(void) setjmp(jb);			      					\    sp = INIT_STACKPTR(_sp);							\    (_MD_GET_SP(_thread)) = (long) sp;   				\    (_MD_GET_PC(_thread)) = (int) _main;   				\	_thread->no_sched = 0;                              \    PR_END_MACRO#endif/*** Switch away from the current thread context by saving its state and** calling the thread scheduler. Reload cpu when we come back from the** context switch because it might have changed.*//*    	ResetTimer();	before _PR_Schedule()		   		*/#define _MD_SWITCH_CONTEXT(_thread)                                 \    PR_BEGIN_MACRO                                                  \    PR_ASSERT(_thread->no_sched);                                   \    if (!setjmp(_thread->md.jb)) {                                  \        _MD_SET_LAST_THREAD(_thread);                               \        if (_PR_MD_CURRENT_CPU()->md.trackScheduling)               \            _PR_MD_CURRENT_CPU()->md.lastThreadSwitch = UpTime();   \        _PR_Schedule();                                             \    } else {                                                        \        PR_ASSERT(_MD_LAST_THREAD() !=_MD_CURRENT_THREAD());        \        _MD_LAST_THREAD()->no_sched = 0;                            \    }                                                               \    PR_END_MACRO/*** Restore a thread context that was saved by _MD_SWITCH_CONTEXT or** initialized by _MD_INIT_CONTEXT.*/#define _MD_RESTORE_CONTEXT(_newThread)	    \    PR_BEGIN_MACRO			    			\	long **jb = (_newThread)->md.jb;	    \	_MD_SET_CURRENT_THREAD(_newThread); 	\    _newThread->no_sched = 1;		        \	longjmp(jb, 1);			    			\    PR_END_MACRO#define _MD_ERRNO()	 _MD_CURRENT_THREAD()->md.osErrCodeextern PRStatus _MD_wait(PRThread *thread, PRIntervalTime timeout);#define _MD_WAIT	_MD_wait/*** Combined thread model related definitions*/#define _MD_CREATE_THREAD(a,b,c,d,e,f) (PR_SUCCESS)#define _MD_WAKEUP_WAITER(a)#define _MD_SET_PRIORITY(a,b)/*** File I/O Related definitions*/extern PRInt32 _PR_MD_WRITE_SYNC(PRFileDesc *fd, void *buf, PRInt32 amount);#define    _PR_MD_WRITE_SYNC _MD_WRITE_SYNCstruct _MDDir {	short		ioVRefNum;	long		ioDirID;	short		ioFDirIndex;	char		*currentEntryName;};#define PR_DIRECTORY_SEPARATOR		'/'#define PR_DIRECTORY_SEPARATOR_STR	"/"

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -