📄 _irix.h
字号:
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- *//* * The contents of this file are subject to the Mozilla Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. * * The Original Code is the Netscape Portable Runtime (NSPR). * * The Initial Developer of the Original Code is Netscape * Communications Corporation. Portions created by Netscape are * Copyright (C) 1998-2000 Netscape Communications Corporation. All * Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL"), in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your * version of this file only under the terms of the GPL and not to * allow others to use your version of this file under the MPL, * indicate your decision by deleting the provisions above and * replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient * may use your version of this file under either the MPL or the * GPL. */#ifndef nspr_irix_defs_h___#define nspr_irix_defs_h___#define _PR_HAVE_ATOMIC_CAS/* * MipsPro assembler defines _LANGUAGE_ASSEMBLY */#ifndef _LANGUAGE_ASSEMBLY#include "prclist.h"#include "prthread.h"#include <sys/ucontext.h>/* * Internal configuration macros */#define PR_LINKER_ARCH "irix"#define _PR_SI_SYSNAME "IRIX"#define _PR_SI_ARCHITECTURE "mips"#define PR_DLL_SUFFIX ".so"#define _PR_VMBASE 0x30000000#define _PR_STACK_VMBASE 0x50000000#define _PR_NUM_GCREGS 9#define _MD_MMAP_FLAGS MAP_PRIVATE#define _MD_DEFAULT_STACK_SIZE 65536L#define _MD_MIN_STACK_SIZE 16384L#undef HAVE_STACK_GROWING_UP#define HAVE_WEAK_IO_SYMBOLS#define HAVE_WEAK_MALLOC_SYMBOLS#define HAVE_DLL#define USE_DLFCN#define _PR_HAVE_ATOMIC_OPS#define _PR_POLL_AVAILABLE#define _PR_USE_POLL#define _PR_STAT_HAS_ST_ATIM#define _PR_HAVE_OFF64_T#define HAVE_POINTER_LOCALTIME_R#define _PR_HAVE_POSIX_SEMAPHORES#define PR_HAVE_POSIX_NAMED_SHARED_MEMORY#define _PR_ACCEPT_INHERIT_NONBLOCK#ifdef _PR_INET6#define _PR_HAVE_GETIPNODEBYNAME#define _PR_HAVE_GETIPNODEBYADDR#endif/* Initialization entry points */NSPR_API(void) _MD_EarlyInit(void);#define _MD_EARLY_INIT _MD_EarlyInitNSPR_API(void) _MD_IrixInit(void);#define _MD_FINAL_INIT _MD_IrixInit#define _MD_INIT_IO()/* Timer operations */NSPR_API(PRIntervalTime) _MD_IrixGetInterval(void);#define _MD_GET_INTERVAL _MD_IrixGetIntervalNSPR_API(PRIntervalTime) _MD_IrixIntervalPerSec(void);#define _MD_INTERVAL_PER_SEC _MD_IrixIntervalPerSec/* GC operations */NSPR_API(void *) _MD_GetSP(PRThread *thread);#define _MD_GET_SP _MD_GetSP/* The atomic operations */#include <mutex.h>#define _MD_INIT_ATOMIC()#define _MD_ATOMIC_INCREMENT(val) add_then_test((unsigned long*)val, 1)#define _MD_ATOMIC_ADD(ptr, val) add_then_test((unsigned long*)ptr, (unsigned long)val)#define _MD_ATOMIC_DECREMENT(val) add_then_test((unsigned long*)val, 0xffffffff)#define _MD_ATOMIC_SET(val, newval) test_and_set((unsigned long*)val, newval)#if defined(_PR_PTHREADS)#else /* defined(_PR_PTHREADS) *//************************************************************************/#include <setjmp.h>#include <errno.h>#include <unistd.h>#include <bstring.h>#include <sys/time.h>#include <ulocks.h>#include <sys/prctl.h>/* * Data region private to each sproc. This region is setup by calling * mmap(...,MAP_LOCAL,...). The private data is mapped at the same * address in every sproc, but every sproc gets a private mapping. * * Just make sure that this structure fits in a page, as only one page * is allocated for the private region. */struct sproc_private_data { struct PRThread *me; struct _PRCPU *cpu; struct PRThread *last; PRUintn intsOff; int sproc_pid;};extern char *_nspr_sproc_private;#define _PR_PRDA() ((struct sproc_private_data *) _nspr_sproc_private)#define _MD_SET_CURRENT_THREAD(_thread) _PR_PRDA()->me = (_thread)#define _MD_THIS_THREAD() (_PR_PRDA()->me)#define _MD_LAST_THREAD() (_PR_PRDA()->last)#define _MD_SET_LAST_THREAD(_thread) _PR_PRDA()->last = (_thread)#define _MD_CURRENT_CPU() (_PR_PRDA()->cpu)#define _MD_SET_CURRENT_CPU(_cpu) _PR_PRDA()->cpu = (_cpu)#define _MD_SET_INTSOFF(_val) (_PR_PRDA()->intsOff = _val)#define _MD_GET_INTSOFF() (_PR_PRDA()->intsOff)#define _MD_SET_SPROC_PID(_val) (_PR_PRDA()->sproc_pid = _val)#define _MD_GET_SPROC_PID() (_PR_PRDA()->sproc_pid)NSPR_API(struct PRThread*) _MD_get_attached_thread(void);NSPR_API(struct PRThread*) _MD_get_current_thread(void);#define _MD_GET_ATTACHED_THREAD() _MD_get_attached_thread()#define _MD_CURRENT_THREAD() _MD_get_current_thread()#define _MD_CHECK_FOR_EXIT() { \ if (_pr_irix_exit_now) { \ _PR_POST_SEM(_pr_irix_exit_sem); \ _MD_Wakeup_CPUs(); \ _exit(0); \ } \ } #define _MD_ATTACH_THREAD(threadp)#define _MD_SAVE_ERRNO(_thread) (_thread)->md.errcode = errno;#define _MD_RESTORE_ERRNO(_thread) errno = (_thread)->md.errcode;extern struct _PRCPU *_pr_primordialCPU;extern usema_t *_pr_irix_exit_sem;extern PRInt32 _pr_irix_exit_now;extern int _pr_irix_primoridal_cpu_fd[];extern PRInt32 _pr_irix_process_exit;extern PRInt32 _pr_irix_process_exit_code;/* Thread operations */#define _PR_LOCK_HEAP() { \ PRIntn _is; \ if (_pr_primordialCPU) { \ if (_MD_GET_ATTACHED_THREAD() && \ !_PR_IS_NATIVE_THREAD( \ _MD_GET_ATTACHED_THREAD())) \ _PR_INTSOFF(_is); \ _PR_LOCK(_pr_heapLock); \ }#define _PR_UNLOCK_HEAP() if (_pr_primordialCPU) { \ _PR_UNLOCK(_pr_heapLock); \ if (_MD_GET_ATTACHED_THREAD() && \ !_PR_IS_NATIVE_THREAD( \ _MD_GET_ATTACHED_THREAD())) \ _PR_INTSON(_is); \ } \ }#define _PR_OPEN_POLL_SEM(_sem) usopenpollsema(_sem, 0666)#define _PR_WAIT_SEM(_sem) uspsema(_sem)#define _PR_POST_SEM(_sem) usvsema(_sem)#define _MD_CVAR_POST_SEM(threadp) usvsema((threadp)->md.cvar_pollsem)#define _MD_IOQ_LOCK()#define _MD_IOQ_UNLOCK()struct _MDLock { ulock_t lock; usptr_t *arena;};/* * disable pre-emption for the LOCAL threads when calling the arena lock * routines */#define _PR_LOCK(lock) { \ PRIntn _is; \ PRThread *me = _MD_GET_ATTACHED_THREAD(); \ if (me && !_PR_IS_NATIVE_THREAD(me)) \ _PR_INTSOFF(_is); \ ussetlock(lock); \ if (me && !_PR_IS_NATIVE_THREAD(me)) \ _PR_FAST_INTSON(_is); \ }#define _PR_UNLOCK(lock) { \ PRIntn _is; \ PRThread *me = _MD_GET_ATTACHED_THREAD(); \ if (me && !_PR_IS_NATIVE_THREAD(me)) \ _PR_INTSOFF(_is); \ usunsetlock(lock); \ if (me && !_PR_IS_NATIVE_THREAD(me)) \ _PR_FAST_INTSON(_is); \ }NSPR_API(PRStatus) _MD_NEW_LOCK(struct _MDLock *md);NSPR_API(void) _MD_FREE_LOCK(struct _MDLock *lockp);#define _MD_LOCK(_lockp) _PR_LOCK((_lockp)->lock)#define _MD_UNLOCK(_lockp) _PR_UNLOCK((_lockp)->lock)#define _MD_TEST_AND_LOCK(_lockp) (uscsetlock((_lockp)->lock, 1) == 0)extern ulock_t _pr_heapLock;struct _MDThread { jmp_buf jb; usptr_t *pollsem_arena; usema_t *cvar_pollsem; PRInt32 cvar_pollsemfd; PRInt32 cvar_pollsem_select; /* acquire sem by calling select */ PRInt32 cvar_wait; /* if 1, thread is waiting on cvar Q */ PRInt32 id; PRInt32 suspending_id; int errcode;};struct _MDThreadStack { PRInt8 notused;};struct _MDSemaphore { usema_t *sem;};struct _MDCVar { ulock_t mdcvar_lock;};struct _MDSegment { PRInt8 notused;};/* * md-specific cpu structure field */#define _PR_MD_MAX_OSFD FD_SETSIZEstruct _MDCPU_Unix { PRCList ioQ; PRUint32 ioq_timeout; PRInt32 ioq_max_osfd; PRInt32 ioq_osfd_cnt;#ifndef _PR_USE_POLL fd_set fd_read_set, fd_write_set, fd_exception_set; PRInt16 fd_read_cnt[_PR_MD_MAX_OSFD],fd_write_cnt[_PR_MD_MAX_OSFD], fd_exception_cnt[_PR_MD_MAX_OSFD];#else struct pollfd *ioq_pollfds; int ioq_pollfds_size;#endif /* _PR_USE_POLL */};#define _PR_IOQ(_cpu) ((_cpu)->md.md_unix.ioQ)#define _PR_ADD_TO_IOQ(_pq, _cpu) PR_APPEND_LINK(&_pq.links, &_PR_IOQ(_cpu))#define _PR_FD_READ_SET(_cpu) ((_cpu)->md.md_unix.fd_read_set)#define _PR_FD_READ_CNT(_cpu) ((_cpu)->md.md_unix.fd_read_cnt)#define _PR_FD_WRITE_SET(_cpu) ((_cpu)->md.md_unix.fd_write_set)#define _PR_FD_WRITE_CNT(_cpu) ((_cpu)->md.md_unix.fd_write_cnt)#define _PR_FD_EXCEPTION_SET(_cpu) ((_cpu)->md.md_unix.fd_exception_set)#define _PR_FD_EXCEPTION_CNT(_cpu) ((_cpu)->md.md_unix.fd_exception_cnt)#define _PR_IOQ_TIMEOUT(_cpu) ((_cpu)->md.md_unix.ioq_timeout)#define _PR_IOQ_MAX_OSFD(_cpu) ((_cpu)->md.md_unix.ioq_max_osfd)#define _PR_IOQ_OSFD_CNT(_cpu) ((_cpu)->md.md_unix.ioq_osfd_cnt)#define _PR_IOQ_POLLFDS(_cpu) ((_cpu)->md.md_unix.ioq_pollfds)#define _PR_IOQ_POLLFDS_SIZE(_cpu) ((_cpu)->md.md_unix.ioq_pollfds_size)#define _PR_IOQ_MIN_POLLFDS_SIZE(_cpu) 32struct _MDCPU { PRInt32 id; PRInt32 suspending_id; struct _MDCPU_Unix md_unix;};/*** Initialize the thread context preparing it to execute _main.*/#define _MD_INIT_CONTEXT(_thread, _sp, _main, status) \ PR_BEGIN_MACRO \ int *jb = (_thread)->md.jb; \ *status = PR_TRUE; \ (void) setjmp(jb); \ (_thread)->md.jb[JB_SP] = (int) ((_sp) - 64); \ (_thread)->md.jb[JB_PC] = (int) _main; \ _thread->no_sched = 0; \ PR_END_MACRO/*** Switch away from the current thread context by saving its state and** calling the thread scheduler. Reload cpu when we come back from the** context switch because it might have changed.** XXX RUNQ lock needed before clearing _PR_NO_SCHED flag, because the* thread may be unr RUNQ?*/#define _MD_SWITCH_CONTEXT(_thread) \ PR_BEGIN_MACRO \ PR_ASSERT(_thread->no_sched); \ if (!setjmp(_thread->md.jb)) { \ _MD_SAVE_ERRNO(_thread) \ _MD_SET_LAST_THREAD(_thread); \ _PR_Schedule(); \ } else { \ PR_ASSERT(_MD_LAST_THREAD() !=_MD_CURRENT_THREAD()); \ _MD_LAST_THREAD()->no_sched = 0; \ } \ PR_END_MACRO/*** Restore a thread context that was saved by _MD_SWITCH_CONTEXT or** initialized by _MD_INIT_CONTEXT.*/#define _MD_RESTORE_CONTEXT(_newThread) \ PR_BEGIN_MACRO \ int *jb = (_newThread)->md.jb; \ _MD_RESTORE_ERRNO(_newThread) \ _MD_SET_CURRENT_THREAD(_newThread); \ _newThread->no_sched = 1; \ longjmp(jb, 1); \ PR_END_MACRONSPR_API(PRStatus) _MD_InitThread(struct PRThread *thread, PRBool wakeup_parent);NSPR_API(PRStatus) _MD_InitAttachedThread(struct PRThread *thread, PRBool wakeup_parent);#define _MD_INIT_THREAD(thread) _MD_InitThread(thread, PR_TRUE)#define _MD_INIT_ATTACHED_THREAD(thread) \ _MD_InitAttachedThread(thread, PR_FALSE)NSPR_API(void) _MD_ExitThread(struct PRThread *thread);#define _MD_EXIT_THREAD _MD_ExitThreadNSPR_API(void) _MD_SuspendThread(struct PRThread *thread);#define _MD_SUSPEND_THREAD _MD_SuspendThreadNSPR_API(void) _MD_ResumeThread(struct PRThread *thread);#define _MD_RESUME_THREAD _MD_ResumeThreadNSPR_API(void) _MD_SuspendCPU(struct _PRCPU *thread);#define _MD_SUSPEND_CPU _MD_SuspendCPUNSPR_API(void) _MD_ResumeCPU(struct _PRCPU *thread);#define _MD_RESUME_CPU _MD_ResumeCPU#define _MD_BEGIN_SUSPEND_ALL()#define _MD_END_SUSPEND_ALL()#define _MD_BEGIN_RESUME_ALL()#define _MD_END_RESUME_ALL()NSPR_API(void) _MD_InitLocks(void);#define _MD_INIT_LOCKS _MD_InitLocksNSPR_API(void) _MD_CleanThread(struct PRThread *thread);#define _MD_CLEAN_THREAD _MD_CleanThread#define _MD_YIELD() sginap(0)/* The _PR_MD_WAIT_LOCK and _PR_MD_WAKEUP_WAITER functions put to sleep and * awaken a thread which is waiting on a lock or cvar. */NSPR_API(PRStatus) _MD_wait(struct PRThread *, PRIntervalTime timeout);#define _MD_WAIT _MD_waitNSPR_API(void) _PR_MD_primordial_cpu();NSPR_API(void) _PR_MD_WAKEUP_PRIMORDIAL_CPU();NSPR_API(PRStatus) _MD_WakeupWaiter(struct PRThread *);#define _MD_WAKEUP_WAITER _MD_WakeupWaiterNSPR_API(void ) _MD_exit(PRIntn status);#define _MD_EXIT _MD_exit#include "prthread.h"NSPR_API(void) _MD_SetPriority(struct _MDThread *thread, PRThreadPriority newPri);#define _MD_SET_PRIORITY _MD_SetPriorityNSPR_API(PRStatus) _MD_CreateThread( struct PRThread *thread, void (*start) (void *), PRThreadPriority priority, PRThreadScope scope, PRThreadState state, PRUint32 stackSize);#define _MD_CREATE_THREAD _MD_CreateThreadextern void _MD_CleanupBeforeExit(void);#define _MD_CLEANUP_BEFORE_EXIT _MD_CleanupBeforeExitNSPR_API(void) _PR_MD_PRE_CLEANUP(PRThread *me);/* The following defines the unwrapped versions of select() and poll(). */extern int _select(int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout);#define _MD_SELECT _select#include <stropts.h>#include <poll.h>#define _MD_POLL _pollextern int _poll(struct pollfd *fds, unsigned long nfds, int timeout);#define HAVE_THREAD_AFFINITY 1NSPR_API(PRInt32) _MD_GetThreadAffinityMask(PRThread *unused, PRUint32 *mask);#define _MD_GETTHREADAFFINITYMASK _MD_GetThreadAffinityMaskNSPR_API(void) _MD_InitRunningCPU(struct _PRCPU *cpu);#define _MD_INIT_RUNNING_CPU _MD_InitRunningCPU#endif /* defined(_PR_PTHREADS) */#endif /* _LANGUAGE_ASSEMBLY */#endif /* nspr_irix_defs_h___ */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -