⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 _linux.h

📁 Netscape NSPR库源码
💻 H
字号:
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- *//*  * The contents of this file are subject to the Mozilla Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/MPL/ *  * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. *  * The Original Code is the Netscape Portable Runtime (NSPR). *  * The Initial Developer of the Original Code is Netscape * Communications Corporation.  Portions created by Netscape are  * Copyright (C) 1998-2000 Netscape Communications Corporation.  All * Rights Reserved. *  * Contributor(s): *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL"), in which case the provisions of the GPL are applicable  * instead of those above.  If you wish to allow use of your  * version of this file only under the terms of the GPL and not to * allow others to use your version of this file under the MPL, * indicate your decision by deleting the provisions above and * replace them with the notice and other provisions required by * the GPL.  If you do not delete the provisions above, a recipient * may use your version of this file under either the MPL or the * GPL. */#ifndef nspr_linux_defs_h___#define nspr_linux_defs_h___#include "prthread.h"/* * Internal configuration macros */#define PR_LINKER_ARCH	"linux"#define _PR_SI_SYSNAME  "LINUX"#ifdef __powerpc__#define _PR_SI_ARCHITECTURE "ppc"#elif defined(__alpha)#define _PR_SI_ARCHITECTURE "alpha"#elif defined(__ia64__)#define _PR_SI_ARCHITECTURE "ia64"#elif defined(__mc68000__)#define _PR_SI_ARCHITECTURE "m68k"#elif defined(__sparc__)#define _PR_SI_ARCHITECTURE "sparc"#elif defined(__i386__)#define _PR_SI_ARCHITECTURE "x86"#elif defined(__mips__)#define _PR_SI_ARCHITECTURE "mips"#elif defined(__arm__)#define _PR_SI_ARCHITECTURE "arm"#else#error "Unknown CPU architecture"#endif#define PR_DLL_SUFFIX		".so"#define _PR_VMBASE              0x30000000#define _PR_STACK_VMBASE	0x50000000#define _MD_DEFAULT_STACK_SIZE	65536L#define _MD_MMAP_FLAGS          MAP_PRIVATE#undef	HAVE_STACK_GROWING_UP/* * Elf linux supports dl* functions */#define HAVE_DLL#define USE_DLFCN#if defined(__i386__)#define _PR_HAVE_ATOMIC_OPS#define _MD_INIT_ATOMIC()extern PRInt32 _PR_x86_AtomicIncrement(PRInt32 *val);#define _MD_ATOMIC_INCREMENT          _PR_x86_AtomicIncrementextern PRInt32 _PR_x86_AtomicDecrement(PRInt32 *val);#define _MD_ATOMIC_DECREMENT          _PR_x86_AtomicDecrementextern PRInt32 _PR_x86_AtomicAdd(PRInt32 *ptr, PRInt32 val);#define _MD_ATOMIC_ADD                _PR_x86_AtomicAddextern PRInt32 _PR_x86_AtomicSet(PRInt32 *val, PRInt32 newval);#define _MD_ATOMIC_SET                _PR_x86_AtomicSet#endif#if defined(__ia64__)#define _PR_HAVE_ATOMIC_OPS#define _MD_INIT_ATOMIC()extern PRInt32 _PR_ia64_AtomicIncrement(PRInt32 *val);#define _MD_ATOMIC_INCREMENT          _PR_ia64_AtomicIncrementextern PRInt32 _PR_ia64_AtomicDecrement(PRInt32 *val);#define _MD_ATOMIC_DECREMENT          _PR_ia64_AtomicDecrementextern PRInt32 _PR_ia64_AtomicAdd(PRInt32 *ptr, PRInt32 val);#define _MD_ATOMIC_ADD                _PR_ia64_AtomicAddextern PRInt32 _PR_ia64_AtomicSet(PRInt32 *val, PRInt32 newval);#define _MD_ATOMIC_SET                _PR_ia64_AtomicSet#endif#define USE_SETJMP#if defined(__GLIBC__) && __GLIBC__ >= 2#define _PR_POLL_AVAILABLE#endif#undef _PR_USE_POLL#define _PR_STAT_HAS_ONLY_ST_ATIME#if defined(__alpha) || defined(__ia64__)#define _PR_HAVE_LARGE_OFF_T#elif (__GLIBC__ > 2) || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1)#define _PR_HAVE_OFF64_T#else#define _PR_NO_LARGE_FILES#endif#if (__GLIBC__ > 2) || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1)#define _PR_INET6#define _PR_HAVE_GETHOSTBYNAME2#define _PR_INET6_PROBE#endif#define _PR_HAVE_SYSV_SEMAPHORES#define PR_HAVE_SYSV_NAMED_SHARED_MEMORY#if (__GLIBC__ >= 2) && defined(_PR_PTHREADS)#define _PR_HAVE_GETHOST_R#define _PR_HAVE_GETHOST_R_INT#endif#ifdef _PR_PTHREADSextern void _MD_CleanupBeforeExit(void);#define _MD_CLEANUP_BEFORE_EXIT _MD_CleanupBeforeExit#else  /* ! _PR_PTHREADS */#include <setjmp.h>#define PR_CONTEXT_TYPE	sigjmp_buf#define CONTEXT(_th) ((_th)->md.context)#ifdef __powerpc__/* * PowerPC based MkLinux * * On the PowerPC, the new style jmp_buf isn't used until glibc * 2.1. */#if (__GLIBC__ > 2) || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1)#define _MD_GET_SP(_t) (_t)->md.context[0].__jmpbuf[JB_GPR1]#else#define _MD_GET_SP(_t) (_t)->md.context[0].__jmpbuf[0].__misc[0]#endif /* glibc 2.1 or later */#define _MD_SET_FP(_t, val)#define _MD_GET_SP_PTR(_t) &(_MD_GET_SP(_t))#define _MD_GET_FP_PTR(_t) ((void *) 0)/* aix = 64, macos = 70 */#define PR_NUM_GCREGS  64#elif defined(__alpha)/* Alpha based Linux */#if defined(__GLIBC__) && __GLIBC__ >= 2#define _MD_GET_SP(_t) (_t)->md.context[0].__jmpbuf[JB_SP]#define _MD_SET_FP(_t, val)#define _MD_GET_SP_PTR(_t) &(_MD_GET_SP(_t))#define _MD_GET_FP_PTR(_t) ((void *) 0)#define _MD_SP_TYPE long int#else#define _MD_GET_SP(_t) (_t)->md.context[0].__jmpbuf[0].__sp#define _MD_SET_FP(_t, val)#define _MD_GET_SP_PTR(_t) &(_MD_GET_SP(_t))#define _MD_GET_FP_PTR(_t) ((void *) 0)#define _MD_SP_TYPE __ptr_t#endif /* defined(__GLIBC__) && __GLIBC__ >= 2 *//* XXX not sure if this is correct, or maybe it should be 17? */#define PR_NUM_GCREGS 9#elif defined(__ia64__)#define _MD_GET_SP(_t)      ((long *)((_t)->md.context[0].__jmpbuf)[0])#define _MD_SET_FP(_t, val)#define _MD_GET_SP_PTR(_t)  &(_MD_GET_SP(_t))#define _MD_GET_FP_PTR(_t)  ((void *) 0)#define _MD_SP_TYPE         long int#define PR_NUM_GCREGS       _JBLEN#elif defined(__mc68000__)/* m68k based Linux *//* * On the m68k, glibc still uses the old style sigjmp_buf, even * in glibc 2.0.7. */#if defined(__GLIBC__) && __GLIBC__ >= 2#define _MD_GET_SP(_t) (_t)->md.context[0].__jmpbuf[0].__sp#define _MD_SET_FP(_t, val)#define _MD_GET_SP_PTR(_t) &(_MD_GET_SP(_t))#define _MD_GET_FP_PTR(_t) ((void *) 0)#define _MD_SP_TYPE int#else#define _MD_GET_SP(_t) (_t)->md.context[0].__jmpbuf[0].__sp#define _MD_SET_FP(_t, val)#define _MD_GET_SP_PTR(_t) &(_MD_GET_SP(_t))#define _MD_GET_FP_PTR(_t) ((void *) 0)#define _MD_SP_TYPE __ptr_t#endif /* defined(__GLIBC__) && __GLIBC__ >= 2 *//* XXX not sure if this is correct, or maybe it should be 17? */#define PR_NUM_GCREGS 9#elif defined(__sparc__)/* Sparc */#if defined(__GLIBC__) && __GLIBC__ >= 2/* * You need glibc2-2.0.7-25 or later. The libraries that came with * Red Hat 5.1 are not new enough, but they are in 5.2. */#define _MD_GET_SP(_t) (_t)->md.context[0].__jmpbuf[JB_SP]#define _MD_SET_FP(_t, val) ((_t)->md.context[0].__jmpbuf[JB_FP] = val)#define _MD_GET_SP_PTR(_t) &(_MD_GET_SP(_t))#define _MD_GET_FP_PTR(_t) (&(_t)->md.context[0].__jmpbuf[JB_FP])#define _MD_SP_TYPE int#else#define _MD_GET_SP(_t) (_t)->md.context[0].__jmpbuf[0].__fp#define _MD_SET_FP(_t, val)#define _MD_GET_SP_PTR(_t) &(_MD_GET_SP(_t))#define _MD_GET_FP_PTR(_t) ((void *) 0)#define _MD_SP_TYPE __ptr_t#endif /* defined(__GLIBC__) && __GLIBC__ >= 2 */#elif defined(__i386__)/* Intel based Linux */#if defined(__GLIBC__) && __GLIBC__ >= 2#define _MD_GET_SP(_t) (_t)->md.context[0].__jmpbuf[JB_SP]#define _MD_SET_FP(_t, val) ((_t)->md.context[0].__jmpbuf[JB_BP] = val)#define _MD_GET_SP_PTR(_t) &(_MD_GET_SP(_t))#define _MD_GET_FP_PTR(_t) (&(_t)->md.context[0].__jmpbuf[JB_BP])#define _MD_SP_TYPE int#else#define _MD_GET_SP(_t) (_t)->md.context[0].__jmpbuf[0].__sp#define _MD_SET_FP(_t, val) ((_t)->md.context[0].__jmpbuf[0].__bp = val)#define _MD_GET_SP_PTR(_t) &(_MD_GET_SP(_t))#define _MD_GET_FP_PTR(_t) &((_t)->md.context[0].__jmpbuf[0].__bp)#define _MD_SP_TYPE __ptr_t#endif /* defined(__GLIBC__) && __GLIBC__ >= 2 */#define PR_NUM_GCREGS   6#elif defined(__mips__)/* Linux/MIPS */#if defined(__GLIBC__) && __GLIBC__ >= 2#define _MD_GET_SP(_t) (_t)->md.context[0].__jmpbuf[0].__sp#define _MD_SET_FP(_t, val) ((_t)->md.context[0].__jmpbuf[0].__fp = (val))#define _MD_GET_SP_PTR(_t) &(_MD_GET_SP(_t))#define _MD_GET_FP_PTR(_t) (&(_t)->md.context[0].__jmpbuf[0].__fp)#define _MD_SP_TYPE __ptr_t#else#error "Linux/MIPS pre-glibc2 not supported yet"#endif /* defined(__GLIBC__) && __GLIBC__ >= 2 */#elif defined(__arm__)/* ARM/Linux */#if defined(__GLIBC__) && __GLIBC__ >= 2#define _MD_GET_SP(_t) (_t)->md.context[0].__jmpbuf[20]#define _MD_SET_FP(_t, val) ((_t)->md.context[0].__jmpbuf[19] = (val))#define _MD_GET_SP_PTR(_t) &(_MD_GET_SP(_t))#define _MD_GET_FP_PTR(_t) (&(_t)->md.context[0].__jmpbuf[19])#define _MD_SP_TYPE __ptr_t#else#error "ARM/Linux pre-glibc2 not supported yet"#endif /* defined(__GLIBC__) && __GLIBC__ >= 2 */#else#error "Unknown CPU architecture"#endif /*__powerpc__*//*** Initialize a thread context to run "_main()" when started*/#ifdef __powerpc__#define _MD_INIT_CONTEXT(_thread, _sp, _main, status)  \{  \    *status = PR_TRUE;  \    if (sigsetjmp(CONTEXT(_thread), 1)) {  \        _main();  \    }  \    _MD_GET_SP(_thread) = (unsigned char*) ((_sp) - 128); \	_thread->md.sp = _MD_GET_SP_PTR(_thread); \	_thread->md.fp = _MD_GET_FP_PTR(_thread); \    _MD_SET_FP(_thread, 0); \}#elif defined(__mips__)#define _MD_INIT_CONTEXT(_thread, _sp, _main, status)  \{  \    *status = PR_TRUE;  \    (void) sigsetjmp(CONTEXT(_thread), 1);  \    _thread->md.context[0].__jmpbuf[0].__pc = (__ptr_t) _main;  \    _MD_GET_SP(_thread) = (_MD_SP_TYPE) ((_sp) - 64); \    _thread->md.sp = _MD_GET_SP_PTR(_thread); \    _thread->md.fp = _MD_GET_FP_PTR(_thread); \    _MD_SET_FP(_thread, 0); \}#else#define _MD_INIT_CONTEXT(_thread, _sp, _main, status)  \{  \    *status = PR_TRUE;  \    if (sigsetjmp(CONTEXT(_thread), 1)) {  \        _main();  \    }  \    _MD_GET_SP(_thread) = (_MD_SP_TYPE) ((_sp) - 64); \	_thread->md.sp = _MD_GET_SP_PTR(_thread); \	_thread->md.fp = _MD_GET_FP_PTR(_thread); \    _MD_SET_FP(_thread, 0); \}#endif /*__powerpc__*/#define _MD_SWITCH_CONTEXT(_thread)  \    if (!sigsetjmp(CONTEXT(_thread), 1)) {  \	(_thread)->md.errcode = errno;  \	_PR_Schedule();  \    }/*** Restore a thread context, saved by _MD_SWITCH_CONTEXT*/#define _MD_RESTORE_CONTEXT(_thread) \{   \    errno = (_thread)->md.errcode;  \    _MD_SET_CURRENT_THREAD(_thread);  \    siglongjmp(CONTEXT(_thread), 1);  \}/* Machine-dependent (MD) data structures */struct _MDThread {    PR_CONTEXT_TYPE context;	void *sp;	void *fp;    int id;    int errcode;};struct _MDThreadStack {    PRInt8 notused;};struct _MDLock {    PRInt8 notused;};struct _MDSemaphore {    PRInt8 notused;};struct _MDCVar {    PRInt8 notused;};struct _MDSegment {    PRInt8 notused;};/* * md-specific cpu structure field */#include <sys/time.h>  /* for FD_SETSIZE */#define _PR_MD_MAX_OSFD FD_SETSIZEstruct _MDCPU_Unix {    PRCList ioQ;    PRUint32 ioq_timeout;    PRInt32 ioq_max_osfd;    PRInt32 ioq_osfd_cnt;#ifndef _PR_USE_POLL    fd_set fd_read_set, fd_write_set, fd_exception_set;    PRInt16 fd_read_cnt[_PR_MD_MAX_OSFD],fd_write_cnt[_PR_MD_MAX_OSFD],				fd_exception_cnt[_PR_MD_MAX_OSFD];#else	struct pollfd *ioq_pollfds;	int ioq_pollfds_size;#endif	/* _PR_USE_POLL */};#define _PR_IOQ(_cpu)			((_cpu)->md.md_unix.ioQ)#define _PR_ADD_TO_IOQ(_pq, _cpu) PR_APPEND_LINK(&_pq.links, &_PR_IOQ(_cpu))#define _PR_FD_READ_SET(_cpu)		((_cpu)->md.md_unix.fd_read_set)#define _PR_FD_READ_CNT(_cpu)		((_cpu)->md.md_unix.fd_read_cnt)#define _PR_FD_WRITE_SET(_cpu)		((_cpu)->md.md_unix.fd_write_set)#define _PR_FD_WRITE_CNT(_cpu)		((_cpu)->md.md_unix.fd_write_cnt)#define _PR_FD_EXCEPTION_SET(_cpu)	((_cpu)->md.md_unix.fd_exception_set)#define _PR_FD_EXCEPTION_CNT(_cpu)	((_cpu)->md.md_unix.fd_exception_cnt)#define _PR_IOQ_TIMEOUT(_cpu)		((_cpu)->md.md_unix.ioq_timeout)#define _PR_IOQ_MAX_OSFD(_cpu)		((_cpu)->md.md_unix.ioq_max_osfd)#define _PR_IOQ_OSFD_CNT(_cpu)		((_cpu)->md.md_unix.ioq_osfd_cnt)#define _PR_IOQ_POLLFDS(_cpu)		((_cpu)->md.md_unix.ioq_pollfds)#define _PR_IOQ_POLLFDS_SIZE(_cpu)	((_cpu)->md.md_unix.ioq_pollfds_size)#define _PR_IOQ_MIN_POLLFDS_SIZE(_cpu)	32struct _MDCPU {	struct _MDCPU_Unix md_unix;};#define _MD_INIT_LOCKS()#define _MD_NEW_LOCK(lock) PR_SUCCESS#define _MD_FREE_LOCK(lock)#define _MD_LOCK(lock)#define _MD_UNLOCK(lock)#define _MD_INIT_IO()#define _MD_IOQ_LOCK()#define _MD_IOQ_UNLOCK()extern PRStatus _MD_InitializeThread(PRThread *thread);#define _MD_INIT_RUNNING_CPU(cpu)       _MD_unix_init_running_cpu(cpu)#define _MD_INIT_THREAD                 _MD_InitializeThread#define _MD_EXIT_THREAD(thread)#define _MD_SUSPEND_THREAD(thread)      _MD_suspend_thread#define _MD_RESUME_THREAD(thread)       _MD_resume_thread#define _MD_CLEAN_THREAD(_thread)extern PRStatus _MD_CREATE_THREAD(    PRThread *thread,    void (*start) (void *),    PRThreadPriority priority,    PRThreadScope scope,    PRThreadState state,    PRUint32 stackSize);extern void _MD_SET_PRIORITY(struct _MDThread *thread, PRUintn newPri);extern PRStatus _MD_WAIT(PRThread *, PRIntervalTime timeout);extern PRStatus _MD_WAKEUP_WAITER(PRThread *);extern void _MD_YIELD(void);#endif /* ! _PR_PTHREADS */extern void _MD_EarlyInit(void);extern PRIntervalTime _PR_UNIX_GetInterval(void);extern PRIntervalTime _PR_UNIX_TicksPerSecond(void);#define _MD_EARLY_INIT                  _MD_EarlyInit#define _MD_FINAL_INIT					_PR_UnixInit#define _MD_GET_INTERVAL                _PR_UNIX_GetInterval#define _MD_INTERVAL_PER_SEC            _PR_UNIX_TicksPerSecond/* * We wrapped the select() call.  _MD_SELECT refers to the built-in, * unwrapped version. */#define _MD_SELECT __select#ifdef _PR_POLL_AVAILABLE#include <sys/poll.h>extern int __syscall_poll(struct pollfd *ufds, unsigned long int nfds,	int timeout);#define _MD_POLL __syscall_poll#endif/* For writev() */#include <sys/uio.h>extern void _MD_linux_map_sendfile_error(int err);#endif /* nspr_linux_defs_h___ */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -