⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 peek.c

📁 Netscape NSPR库源码
💻 C
字号:
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- *//*  * The contents of this file are subject to the Mozilla Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/MPL/ *  * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. *  * The Original Code is the Netscape Portable Runtime (NSPR). *  * The Initial Developer of the Original Code is Netscape * Communications Corporation.  Portions created by Netscape are  * Copyright (C) 1999-2000 Netscape Communications Corporation.  All * Rights Reserved. *  * Contributor(s): *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL"), in which case the provisions of the GPL are applicable  * instead of those above.  If you wish to allow use of your  * version of this file only under the terms of the GPL and not to * allow others to use your version of this file under the MPL, * indicate your decision by deleting the provisions above and * replace them with the notice and other provisions required by * the GPL.  If you do not delete the provisions above, a recipient * may use your version of this file under either the MPL or the * GPL. *//* * A test case for the PR_MSG_PEEK flag of PR_Recv(). * * Test both blocking and non-blocking sockets. */#include "nspr.h"#include <stdio.h>#include <stdlib.h>#include <string.h>#define BUFFER_SIZE 1024static int iterations = 10;/* * In iteration i, recv_amount[i] is the number of bytes we * wish to receive, and send_amount[i] is the number of bytes * we actually send.  Therefore, the number of elements in the * recv_amount or send_amount array should equal to 'iterations'. * For this test to pass we need to ensure that *     recv_amount[i] <= BUFFER_SIZE, *     send_amount[i] <= BUFFER_SIZE, *     send_amount[i] <= recv_amount[i]. */static PRInt32 recv_amount[10] = {    16, 128, 256, 1024, 512, 512, 128, 256, 32, 32};static PRInt32 send_amount[10] = {    16,  64, 128, 1024, 512, 256, 128,  64, 16, 32};/* Blocking I/O */static void ServerB(void *arg){    PRFileDesc *listenSock = (PRFileDesc *) arg;    PRFileDesc *sock;    char buf[BUFFER_SIZE];    PRInt32 nbytes;    int i;    int j;    sock = PR_Accept(listenSock, NULL, PR_INTERVAL_NO_TIMEOUT);    if (NULL == sock) {        fprintf(stderr, "PR_Accept failed\n");        exit(1);    }    for (i = 0; i < iterations; i++) {        memset(buf, 0, sizeof(buf));        nbytes = PR_Recv(sock, buf, recv_amount[i],                PR_MSG_PEEK, PR_INTERVAL_NO_TIMEOUT);        if (-1 == nbytes) {            fprintf(stderr, "PR_Recv failed\n");            exit(1);        }        if (send_amount[i] != nbytes) {            fprintf(stderr, "PR_Recv returned %d, absurd!\n", nbytes);            exit(1);        }        for (j = 0; j < nbytes; j++) {            if (buf[j] != 2*i) {                fprintf(stderr, "byte %d should be %d but is %d\n",                        j, 2*i, buf[j]);                exit(1);            }        }        fprintf(stderr, "server: peeked expected data\n");        memset(buf, 0, sizeof(buf));        nbytes = PR_Recv(sock, buf, recv_amount[i],                PR_MSG_PEEK, PR_INTERVAL_NO_TIMEOUT);        if (-1 == nbytes) {            fprintf(stderr, "PR_Recv failed\n");            exit(1);        }        if (send_amount[i] != nbytes) {            fprintf(stderr, "PR_Recv returned %d, absurd!\n", nbytes);            exit(1);        }        for (j = 0; j < nbytes; j++) {            if (buf[j] != 2*i) {                fprintf(stderr, "byte %d should be %d but is %d\n",                        j, 2*i, buf[j]);                exit(1);            }        }        fprintf(stderr, "server: peeked expected data\n");        memset(buf, 0, sizeof(buf));        nbytes = PR_Recv(sock, buf, recv_amount[i],                0, PR_INTERVAL_NO_TIMEOUT);        if (-1 == nbytes) {            fprintf(stderr, "PR_Recv failed\n");            exit(1);        }        if (send_amount[i] != nbytes) {            fprintf(stderr, "PR_Recv returned %d, absurd!\n", nbytes);            exit(1);        }        for (j = 0; j < nbytes; j++) {            if (buf[j] != 2*i) {                fprintf(stderr, "byte %d should be %d but is %d\n",                        j, 2*i, buf[j]);                exit(1);            }        }        fprintf(stderr, "server: received expected data\n");        PR_Sleep(PR_SecondsToInterval(1));        memset(buf, 2*i+1, send_amount[i]);        nbytes = PR_Send(sock, buf, send_amount[i],                0, PR_INTERVAL_NO_TIMEOUT);        if (-1 == nbytes) {            fprintf(stderr, "PR_Send failed\n");            exit(1);        }        if (send_amount[i] != nbytes) {            fprintf(stderr, "PR_Send returned %d, absurd!\n", nbytes);            exit(1);        }    }    if (PR_Close(sock) == PR_FAILURE) {        fprintf(stderr, "PR_Close failed\n");        exit(1);    }}/* Non-blocking I/O */static void ClientNB(void *arg){    PRFileDesc *sock;    PRSocketOptionData opt;    PRUint16 port = (PRUint16) arg;    PRNetAddr addr;    char buf[BUFFER_SIZE];    PRPollDesc pd;    PRInt32 npds;    PRInt32 nbytes;    int i;    int j;    sock = PR_OpenTCPSocket(PR_AF_INET6);    if (NULL == sock) {        fprintf(stderr, "PR_OpenTCPSocket failed\n");        exit(1);    }    opt.option = PR_SockOpt_Nonblocking;    opt.value.non_blocking = PR_TRUE;    if (PR_SetSocketOption(sock, &opt) == PR_FAILURE) {        fprintf(stderr, "PR_SetSocketOption failed\n");        exit(1);    }    memset(&addr, 0, sizeof(addr));    if (PR_SetNetAddr(PR_IpAddrLoopback, PR_AF_INET6, port, &addr)            == PR_FAILURE) {        fprintf(stderr, "PR_SetNetAddr failed\n");        exit(1);    }    if (PR_Connect(sock, &addr, PR_INTERVAL_NO_TIMEOUT) == PR_FAILURE) {        if (PR_GetError() != PR_IN_PROGRESS_ERROR) {            fprintf(stderr, "PR_Connect failed\n");            exit(1);        }        pd.fd = sock;        pd.in_flags = PR_POLL_WRITE | PR_POLL_EXCEPT;        npds = PR_Poll(&pd, 1, PR_INTERVAL_NO_TIMEOUT);        if (-1 == npds) {            fprintf(stderr, "PR_Poll failed\n");            exit(1);        }        if (1 != npds) {            fprintf(stderr, "PR_Poll returned %d, absurd!\n", npds);            exit(1);        }        if (PR_GetConnectStatus(&pd) == PR_FAILURE) {            fprintf(stderr, "PR_GetConnectStatus failed\n");            exit(1);        }    }    for (i = 0; i < iterations; i++) {        PR_Sleep(PR_SecondsToInterval(1));        memset(buf, 2*i, send_amount[i]);        while ((nbytes = PR_Send(sock, buf, send_amount[i],                0, PR_INTERVAL_NO_TIMEOUT)) == -1) {            if (PR_GetError() != PR_WOULD_BLOCK_ERROR) {                fprintf(stderr, "PR_Send failed\n");                exit(1);            }            pd.fd = sock;            pd.in_flags = PR_POLL_WRITE;            npds = PR_Poll(&pd, 1, PR_INTERVAL_NO_TIMEOUT);            if (-1 == npds) {                fprintf(stderr, "PR_Poll failed\n");                exit(1);            }            if (1 != npds) {                fprintf(stderr, "PR_Poll returned %d, absurd!\n", npds);                exit(1);            }        }        if (send_amount[i] != nbytes) {            fprintf(stderr, "PR_Send returned %d, absurd!\n", nbytes);            exit(1);        }        memset(buf, 0, sizeof(buf));        while ((nbytes = PR_Recv(sock, buf, recv_amount[i],                PR_MSG_PEEK, PR_INTERVAL_NO_TIMEOUT)) == -1) {            if (PR_GetError() != PR_WOULD_BLOCK_ERROR) {                fprintf(stderr, "PR_Recv failed\n");                exit(1);            }            pd.fd = sock;            pd.in_flags = PR_POLL_READ;            npds = PR_Poll(&pd, 1, PR_INTERVAL_NO_TIMEOUT);            if (-1 == npds) {                fprintf(stderr, "PR_Poll failed\n");                exit(1);            }            if (1 != npds) {                fprintf(stderr, "PR_Poll returned %d, absurd!\n", npds);                exit(1);            }        }        if (send_amount[i] != nbytes) {            fprintf(stderr, "PR_Recv returned %d, absurd!\n", nbytes);            exit(1);        }        for (j = 0; j < nbytes; j++) {            if (buf[j] != 2*i+1) {                fprintf(stderr, "byte %d should be %d but is %d\n",                        j, 2*i+1, buf[j]);                exit(1);            }        }        fprintf(stderr, "client: peeked expected data\n");        memset(buf, 0, sizeof(buf));        nbytes = PR_Recv(sock, buf, recv_amount[i],                PR_MSG_PEEK, PR_INTERVAL_NO_TIMEOUT);        if (-1 == nbytes) {            fprintf(stderr, "PR_Recv failed\n");            exit(1);        }        if (send_amount[i] != nbytes) {            fprintf(stderr, "PR_Recv returned %d, absurd!\n", nbytes);            exit(1);        }        for (j = 0; j < nbytes; j++) {            if (buf[j] != 2*i+1) {                fprintf(stderr, "byte %d should be %d but is %d\n",                        j, 2*i+1, buf[j]);                exit(1);            }        }        fprintf(stderr, "client: peeked expected data\n");        memset(buf, 0, sizeof(buf));        nbytes = PR_Recv(sock, buf, recv_amount[i],                0, PR_INTERVAL_NO_TIMEOUT);        if (-1 == nbytes) {            fprintf(stderr, "PR_Recv failed\n");            exit(1);        }        if (send_amount[i] != nbytes) {            fprintf(stderr, "PR_Recv returned %d, absurd!\n", nbytes);            exit(1);        }        for (j = 0; j < nbytes; j++) {            if (buf[j] != 2*i+1) {                fprintf(stderr, "byte %d should be %d but is %d\n",                        j, 2*i+1, buf[j]);                exit(1);            }        }        fprintf(stderr, "client: received expected data\n");    }    if (PR_Close(sock) == PR_FAILURE) {        fprintf(stderr, "PR_Close failed\n");        exit(1);    }}static voidRunTest(PRThreadScope scope, PRFileDesc *listenSock, PRUint16 port){    PRThread *server, *client;    server = PR_CreateThread(PR_USER_THREAD, ServerB, listenSock,            PR_PRIORITY_NORMAL, scope, PR_JOINABLE_THREAD, 0);    if (NULL == server) {        fprintf(stderr, "PR_CreateThread failed\n");        exit(1);    }    client = PR_CreateThread(            PR_USER_THREAD, ClientNB, (void *) port,            PR_PRIORITY_NORMAL, scope, PR_JOINABLE_THREAD, 0);    if (NULL == client) {        fprintf(stderr, "PR_CreateThread failed\n");        exit(1);    }    if (PR_JoinThread(server) == PR_FAILURE) {        fprintf(stderr, "PR_JoinThread failed\n");        exit(1);    }    if (PR_JoinThread(client) == PR_FAILURE) {        fprintf(stderr, "PR_JoinThread failed\n");        exit(1);    }}int main(int argc, char **argv){    PRFileDesc *listenSock;    PRNetAddr addr;    PRUint16 port;    listenSock = PR_OpenTCPSocket(PR_AF_INET6);    if (NULL == listenSock) {        fprintf(stderr, "PR_OpenTCPSocket failed\n");        exit(1);    }    memset(&addr, 0, sizeof(addr));    if (PR_SetNetAddr(PR_IpAddrAny, PR_AF_INET6, 0, &addr) == PR_FAILURE) {        fprintf(stderr, "PR_SetNetAddr failed\n");        exit(1);    }    if (PR_Bind(listenSock, &addr) == PR_FAILURE) {        fprintf(stderr, "PR_Bind failed\n");        exit(1);    }    if (PR_GetSockName(listenSock, &addr) == PR_FAILURE) {        fprintf(stderr, "PR_GetSockName failed\n");        exit(1);    }    port = PR_ntohs(addr.ipv6.port);    if (PR_Listen(listenSock, 5) == PR_FAILURE) {        fprintf(stderr, "PR_Listen failed\n");        exit(1);    }    fprintf(stderr, "Running the test with local threads\n");    RunTest(PR_LOCAL_THREAD, listenSock, port);    fprintf(stderr, "Running the test with global threads\n");    RunTest(PR_GLOBAL_THREAD, listenSock, port);    if (PR_Close(listenSock) == PR_FAILURE) {        fprintf(stderr, "PR_Close failed\n");        exit(1);    }    printf("PASS\n");    return 0;}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -