⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 base64.c

📁 Netscape NSPR库源码
💻 C
字号:
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- *//*  * The contents of this file are subject to the Mozilla Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/MPL/ *  * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. *  * The Original Code is the Netscape Portable Runtime (NSPR). *  * The Initial Developer of the Original Code is Netscape * Communications Corporation.  Portions created by Netscape are  * Copyright (C) 1998-2000 Netscape Communications Corporation.  All * Rights Reserved. *  * Contributor(s): *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL"), in which case the provisions of the GPL are applicable  * instead of those above.  If you wish to allow use of your  * version of this file only under the terms of the GPL and not to * allow others to use your version of this file under the MPL, * indicate your decision by deleting the provisions above and * replace them with the notice and other provisions required by * the GPL.  If you do not delete the provisions above, a recipient * may use your version of this file under either the MPL or the * GPL. */#include "plbase64.h"#include "prlog.h" /* For PR_NOT_REACHED */#include "prmem.h" /* for malloc / PR_MALLOC */#include "plstr.h" /* for PL_strlen */static unsigned char *base = (unsigned char *)"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";static voidencode3to4(    const unsigned char    *src,    unsigned char          *dest){    PRUint32 b32 = (PRUint32)0;    PRIntn i, j = 18;    for( i = 0; i < 3; i++ )    {        b32 <<= 8;        b32 |= (PRUint32)src[i];    }    for( i = 0; i < 4; i++ )    {        dest[i] = base[ (PRUint32)((b32>>j) & 0x3F) ];        j -= 6;    }    return;}static voidencode2to4(    const unsigned char    *src,    unsigned char          *dest){    dest[0] = base[ (PRUint32)((src[0]>>2) & 0x3F) ];    dest[1] = base[ (PRUint32)(((src[0] & 0x03) << 4) | ((src[1] >> 4) & 0x0F)) ];    dest[2] = base[ (PRUint32)((src[1] & 0x0F) << 2) ];    dest[3] = (unsigned char)'=';    return;}static voidencode1to4(    const unsigned char    *src,    unsigned char          *dest){    dest[0] = base[ (PRUint32)((src[0]>>2) & 0x3F) ];    dest[1] = base[ (PRUint32)((src[0] & 0x03) << 4) ];    dest[2] = (unsigned char)'=';    dest[3] = (unsigned char)'=';    return;}static voidencode(    const unsigned char    *src,    PRUint32                srclen,    unsigned char          *dest){    while( srclen >= 3 )    {        encode3to4(src, dest);        src += 3;        dest += 4;        srclen -= 3;    }    switch( srclen )    {        case 2:            encode2to4(src, dest);            break;        case 1:            encode1to4(src, dest);            break;        case 0:            break;        default:            PR_NOT_REACHED("coding error");    }    return;}/* * PL_Base64Encode * * If the destination argument is NULL, a return buffer is  * allocated, and the data therein will be null-terminated.   * If the destination argument is not NULL, it is assumed to * be of sufficient size, and the contents will not be null- * terminated by this routine. * * Returns null if the allocation fails. */PR_IMPLEMENT(char *)PL_Base64Encode(    const char *src,    PRUint32    srclen,    char       *dest){    if( 0 == srclen )    {        srclen = PL_strlen(src);    }    if( (char *)0 == dest )    {        PRUint32 destlen = ((srclen + 2)/3) * 4;        dest = (char *)PR_MALLOC(destlen + 1);        if( (char *)0 == dest )        {            return (char *)0;        }        dest[ destlen ] = (char)0; /* null terminate */    }    encode((const unsigned char *)src, srclen, (unsigned char *)dest);    return dest;}static PRInt32codetovalue(    unsigned char c){    if( (c >= (unsigned char)'A') && (c <= (unsigned char)'Z') )    {        return (PRInt32)(c - (unsigned char)'A');    }    else if( (c >= (unsigned char)'a') && (c <= (unsigned char)'z') )    {        return ((PRInt32)(c - (unsigned char)'a') +26);    }    else if( (c >= (unsigned char)'0') && (c <= (unsigned char)'9') )    {        return ((PRInt32)(c - (unsigned char)'0') +52);    }    else if( (unsigned char)'+' == c )    {        return (PRInt32)62;    }    else if( (unsigned char)'/' == c )    {        return (PRInt32)63;    }    else    {        return -1;    }}static PRStatusdecode4to3(    const unsigned char    *src,    unsigned char          *dest){    PRUint32 b32 = (PRUint32)0;    PRInt32 bits;    PRIntn i;    for( i = 0; i < 4; i++ )    {        bits = codetovalue(src[i]);        if( bits < 0 )        {            return PR_FAILURE;        }        b32 <<= 6;        b32 |= bits;    }    dest[0] = (unsigned char)((b32 >> 16) & 0xFF);    dest[1] = (unsigned char)((b32 >>  8) & 0xFF);    dest[2] = (unsigned char)((b32      ) & 0xFF);    return PR_SUCCESS;}static PRStatusdecode3to2(    const unsigned char    *src,    unsigned char          *dest){    PRUint32 b32 = (PRUint32)0;    PRInt32 bits;    PRUint32 ubits;    bits = codetovalue(src[0]);    if( bits < 0 )    {        return PR_FAILURE;    }    b32 = (PRUint32)bits;    b32 <<= 6;    bits = codetovalue(src[1]);    if( bits < 0 )    {        return PR_FAILURE;    }    b32 |= (PRUint32)bits;    b32 <<= 4;    bits = codetovalue(src[2]);    if( bits < 0 )    {        return PR_FAILURE;    }    ubits = (PRUint32)bits;    b32 |= (ubits >> 2);    dest[0] = (unsigned char)((b32 >> 8) & 0xFF);    dest[1] = (unsigned char)((b32     ) & 0xFF);    return PR_SUCCESS;}static PRStatusdecode2to1(    const unsigned char    *src,    unsigned char          *dest){    PRUint32 b32;    PRUint32 ubits;    PRInt32 bits;    bits = codetovalue(src[0]);    if( bits < 0 )    {        return PR_FAILURE;    }    ubits = (PRUint32)bits;    b32 = (ubits << 2);    bits = codetovalue(src[1]);    if( bits < 0 )    {        return PR_FAILURE;    }    ubits = (PRUint32)bits;    b32 |= (ubits >> 4);    dest[0] = (unsigned char)b32;    return PR_SUCCESS;}static PRStatusdecode(    const unsigned char    *src,    PRUint32                srclen,    unsigned char          *dest){    PRStatus rv;    while( srclen >= 4 )    {        rv = decode4to3(src, dest);        if( PR_SUCCESS != rv )        {            return PR_FAILURE;        }        src += 4;        dest += 3;        srclen -= 4;    }    switch( srclen )    {        case 3:            rv = decode3to2(src, dest);            break;        case 2:            rv = decode2to1(src, dest);            break;        case 1:            rv = PR_FAILURE;            break;        case 0:            rv = PR_SUCCESS;            break;        default:            PR_NOT_REACHED("coding error");    }    return rv;}/* * PL_Base64Decode * * If the destination argument is NULL, a return buffer is * allocated and the data therein will be null-terminated. * If the destination argument is not null, it is assumed * to be of sufficient size, and the data will not be null- * terminated by this routine. *  * Returns null if the allocation fails, or if the source string is  * not well-formed. */PR_IMPLEMENT(char *)PL_Base64Decode(    const char *src,    PRUint32    srclen,    char       *dest){    PRStatus status;    PRBool allocated = PR_FALSE;    if( (char *)0 == src )    {        return (char *)0;    }    if( 0 == srclen )    {        srclen = PL_strlen(src);    }    if( srclen && (0 == (srclen & 3)) )    {        if( (char)'=' == src[ srclen-1 ] )        {            if( (char)'=' == src[ srclen-2 ] )            {                srclen -= 2;            }            else            {                srclen -= 1;            }        }    }    if( (char *)0 == dest )    {        PRUint32 destlen = ((srclen * 3) / 4);        dest = (char *)PR_MALLOC(destlen + 1);        if( (char *)0 == dest )        {            return (char *)0;        }        dest[ destlen ] = (char)0; /* null terminate */        allocated = PR_TRUE;    }    status = decode((const unsigned char *)src, srclen, (unsigned char *)dest);    if( PR_SUCCESS != status )    {        if( PR_TRUE == allocated )        {            PR_DELETE(dest);        }        return (char *)0;    }    return dest;}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -