cmsattr.c

来自「支持SSL v2/v3, TLS, PKCS #5, PKCS #7, PKCS」· C语言 代码 · 共 454 行

C
454
字号
/* * The contents of this file are subject to the Mozilla Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/MPL/ *  * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. *  * The Original Code is the Netscape security libraries. *  * The Initial Developer of the Original Code is Netscape * Communications Corporation.  Portions created by Netscape are  * Copyright (C) 1994-2000 Netscape Communications Corporation.  All * Rights Reserved. *  * Contributor(s): *  * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL"), in which case the provisions of the GPL are applicable  * instead of those above.  If you wish to allow use of your  * version of this file only under the terms of the GPL and not to * allow others to use your version of this file under the MPL, * indicate your decision by deleting the provisions above and * replace them with the notice and other provisions required by * the GPL.  If you do not delete the provisions above, a recipient * may use your version of this file under either the MPL or the * GPL. *//* * CMS attributes. * * $Id: cmsattr.c,v 1.3 2000/06/20 16:28:57 chrisk%netscape.com Exp $ */#include "cmslocal.h"#include "secasn1.h"#include "secitem.h"#include "secoid.h"#include "pk11func.h"#include "prtime.h"#include "secerr.h"/* * ------------------------------------------------------------------- * XXX The following Attribute stuff really belongs elsewhere. * The Attribute type is *not* part of CMS but rather X.501. * But for now, since CMS is the only customer of attributes, * we define them here.  Once there is a use outside of CMS, * then change the attribute types and functions from internal * to external naming convention, and move them elsewhere! *//* * NSS_CMSAttribute_Create - create an attribute * * if value is NULL, the attribute won't have a value. It can be added later * with NSS_CMSAttribute_AddValue. */NSSCMSAttribute *NSS_CMSAttribute_Create(PRArenaPool *poolp, SECOidTag oidtag, SECItem *value, PRBool encoded){    NSSCMSAttribute *attr;    SECItem *copiedvalue;    void *mark;    PORT_Assert (poolp != NULL);    mark = PORT_ArenaMark (poolp);    attr = (NSSCMSAttribute *)PORT_ArenaZAlloc(poolp, sizeof(NSSCMSAttribute));    if (attr == NULL)	goto loser;    attr->typeTag = SECOID_FindOIDByTag(oidtag);    if (attr->typeTag == NULL)	goto loser;    if (SECITEM_CopyItem(poolp, &(attr->type), &(attr->typeTag->oid)) != SECSuccess)	goto loser;    if (value != NULL) {	if ((copiedvalue = SECITEM_AllocItem(poolp, NULL, value->len)) == NULL)	    goto loser;	if (SECITEM_CopyItem(poolp, copiedvalue, value) != SECSuccess)	    goto loser;	NSS_CMSArray_Add(poolp, (void ***)&(attr->values), (void *)copiedvalue);    }    attr->encoded = encoded;    PORT_ArenaUnmark (poolp, mark);    return attr;loser:    PORT_Assert (mark != NULL);    PORT_ArenaRelease (poolp, mark);    return NULL;}/* * NSS_CMSAttribute_AddValue - add another value to an attribute */SECStatusNSS_CMSAttribute_AddValue(PLArenaPool *poolp, NSSCMSAttribute *attr, SECItem *value){    SECItem copiedvalue;    void *mark;    PORT_Assert (poolp != NULL);    mark = PORT_ArenaMark(poolp);    /* XXX we need an object memory model #$%#$%! */    if (SECITEM_CopyItem(poolp, &copiedvalue, value) != SECSuccess)	goto loser;    if (NSS_CMSArray_Add(poolp, (void ***)&(attr->values), (void *)&copiedvalue) != SECSuccess)	goto loser;    PORT_ArenaUnmark(poolp, mark);    return SECSuccess;loser:    PORT_Assert (mark != NULL);    PORT_ArenaRelease (poolp, mark);    return SECFailure;}/* * NSS_CMSAttribute_GetType - return the OID tag */SECOidTagNSS_CMSAttribute_GetType(NSSCMSAttribute *attr){    SECOidData *typetag;    typetag = SECOID_FindOID(&(attr->type));    if (typetag == NULL)	return SEC_OID_UNKNOWN;    return typetag->offset;}/* * NSS_CMSAttribute_GetValue - return the first attribute value * * We do some sanity checking first: * - Multiple values are *not* expected. * - Empty values are *not* expected. */SECItem *NSS_CMSAttribute_GetValue(NSSCMSAttribute *attr){    SECItem *value;    if (attr == NULL)	return NULL;    value = attr->values[0];    if (value == NULL || value->data == NULL || value->len == 0)	return NULL;    if (attr->values[1] != NULL)	return NULL;    return value;}/* * NSS_CMSAttribute_CompareValue - compare the attribute's first value against data */PRBoolNSS_CMSAttribute_CompareValue(NSSCMSAttribute *attr, SECItem *av){    SECItem *value;        if (attr == NULL)	return PR_FALSE;    value = NSS_CMSAttribute_GetValue(attr);    return (value != NULL && value->len == av->len &&	PORT_Memcmp (value->data, av->data, value->len) == 0);}/* * templates and functions for separate ASN.1 encoding of attributes * * used in NSS_CMSAttributeArray_Reorder *//* * helper function for dynamic template determination of the attribute value */static const SEC_ASN1Template *cms_attr_choose_attr_value_template(void *src_or_dest, PRBool encoding){    const SEC_ASN1Template *theTemplate;    NSSCMSAttribute *attribute;    SECOidData *oiddata;    PRBool encoded;    PORT_Assert (src_or_dest != NULL);    if (src_or_dest == NULL)	return NULL;    attribute = (NSSCMSAttribute *)src_or_dest;    if (encoding && attribute->encoded)	/* we're encoding, and the attribute value is already encoded. */	return SEC_AnyTemplate;    /* get attribute's typeTag */    oiddata = attribute->typeTag;    if (oiddata == NULL) {	oiddata = SECOID_FindOID(&attribute->type);	attribute->typeTag = oiddata;    }    if (oiddata == NULL) {	/* still no OID tag? OID is unknown then. en/decode value as ANY. */	encoded = PR_TRUE;	theTemplate = SEC_AnyTemplate;    } else {	switch (oiddata->offset) {	SEC_OID_PKCS9_SMIME_CAPABILITIES:	SEC_OID_SMIME_ENCRYPTION_KEY_PREFERENCE:	    /* these guys need to stay DER-encoded */	default:	    /* same goes for OIDs that are not handled here */	    encoded = PR_TRUE;	    theTemplate = SEC_AnyTemplate;	    break;	    /* otherwise choose proper template */	case SEC_OID_PKCS9_EMAIL_ADDRESS:	case SEC_OID_RFC1274_MAIL:	case SEC_OID_PKCS9_UNSTRUCTURED_NAME:	    encoded = PR_FALSE;	    theTemplate = SEC_IA5StringTemplate;	    break;	case SEC_OID_PKCS9_CONTENT_TYPE:	    encoded = PR_FALSE;	    theTemplate = SEC_ObjectIDTemplate;	    break;	case SEC_OID_PKCS9_MESSAGE_DIGEST:	    encoded = PR_FALSE;	    theTemplate = SEC_OctetStringTemplate;	    break;	case SEC_OID_PKCS9_SIGNING_TIME:	    encoded = PR_FALSE;	    theTemplate = SEC_UTCTimeTemplate;	    break;	  /* XXX Want other types here, too */	}    }    if (encoding) {	/*	 * If we are encoding and we think we have an already-encoded value,	 * then the code which initialized this attribute should have set	 * the "encoded" property to true (and we would have returned early,	 * up above).  No devastating error, but that code should be fixed.	 * (It could indicate that the resulting encoded bytes are wrong.)	 */	PORT_Assert (!encoded);    } else {	/*	 * We are decoding; record whether the resulting value is	 * still encoded or not.	 */	attribute->encoded = encoded;    }    return theTemplate;}static SEC_ChooseASN1TemplateFunc cms_attr_chooser	= cms_attr_choose_attr_value_template;const SEC_ASN1Template nss_cms_attribute_template[] = {    { SEC_ASN1_SEQUENCE,	  0, NULL, sizeof(NSSCMSAttribute) },    { SEC_ASN1_OBJECT_ID,	  offsetof(NSSCMSAttribute,type) },    { SEC_ASN1_DYNAMIC | SEC_ASN1_SET_OF,	  offsetof(NSSCMSAttribute,values),	  &cms_attr_chooser },    { 0 }};const SEC_ASN1Template nss_cms_set_of_attribute_template[] = {    { SEC_ASN1_SET_OF, 0, nss_cms_attribute_template },};/* ============================================================================= * Attribute Array methods *//* * NSS_CMSAttributeArray_Encode - encode an Attribute array as SET OF Attributes * * If you are wondering why this routine does not reorder the attributes * first, and might be tempted to make it do so, see the comment by the * call to ReorderAttributes in cmsencode.c.  (Or, see who else calls this * and think long and hard about the implications of making it always * do the reordering.) */SECItem *NSS_CMSAttributeArray_Encode(PRArenaPool *poolp, NSSCMSAttribute ***attrs, SECItem *dest){    return SEC_ASN1EncodeItem (poolp, dest, (void *)attrs, nss_cms_set_of_attribute_template);}/* * NSS_CMSAttributeArray_Reorder - sort attribute array by attribute's DER encoding * * make sure that the order of the attributes guarantees valid DER (which must be * in lexigraphically ascending order for a SET OF); if reordering is necessary it * will be done in place (in attrs). */SECStatusNSS_CMSAttributeArray_Reorder(NSSCMSAttribute **attrs){    return NSS_CMSArray_SortByDER((void **)attrs, nss_cms_attribute_template, NULL);}/* * NSS_CMSAttributeArray_FindAttrByOidTag - look through a set of attributes and * find one that matches the specified object ID. * * If "only" is true, then make sure that there is not more than one attribute * of the same type.  Otherwise, just return the first one found. (XXX Does * anybody really want that first-found behavior?  It was like that when I found it...) */NSSCMSAttribute *NSS_CMSAttributeArray_FindAttrByOidTag(NSSCMSAttribute **attrs, SECOidTag oidtag, PRBool only){    SECOidData *oid;    NSSCMSAttribute *attr1, *attr2;    if (attrs == NULL)	return NULL;    oid = SECOID_FindOIDByTag(oidtag);    if (oid == NULL)	return NULL;    while ((attr1 = *attrs++) != NULL) {	if (attr1->type.len == oid->oid.len && PORT_Memcmp (attr1->type.data,							    oid->oid.data,							    oid->oid.len) == 0)	    break;    }    if (attr1 == NULL)	return NULL;    if (!only)	return attr1;    while ((attr2 = *attrs++) != NULL) {	if (attr2->type.len == oid->oid.len && PORT_Memcmp (attr2->type.data,							    oid->oid.data,							    oid->oid.len) == 0)	    break;    }    if (attr2 != NULL)	return NULL;    return attr1;}/* * NSS_CMSAttributeArray_AddAttr - add an attribute to an * array of attributes.  */SECStatusNSS_CMSAttributeArray_AddAttr(PLArenaPool *poolp, NSSCMSAttribute ***attrs, NSSCMSAttribute *attr){    NSSCMSAttribute *oattr;    void *mark;    SECOidTag type;    mark = PORT_ArenaMark(poolp);    /* find oidtag of attr */    type = NSS_CMSAttribute_GetType(attr);    /* see if we have one already */    oattr = NSS_CMSAttributeArray_FindAttrByOidTag(*attrs, type, PR_FALSE);    PORT_Assert (oattr == NULL);    if (oattr != NULL)	goto loser;	/* XXX or would it be better to replace it? */    /* no, shove it in */    if (NSS_CMSArray_Add(poolp, (void ***)attrs, (void *)attr) != SECSuccess)	goto loser;    PORT_ArenaUnmark(poolp, mark);    return SECSuccess;loser:    PORT_ArenaRelease(poolp, mark);    return SECFailure;}/* * NSS_CMSAttributeArray_SetAttr - set an attribute's value in a set of attributes */SECStatusNSS_CMSAttributeArray_SetAttr(PLArenaPool *poolp, NSSCMSAttribute ***attrs, SECOidTag type, SECItem *value, PRBool encoded){    NSSCMSAttribute *attr;    void *mark;    mark = PORT_ArenaMark(poolp);    /* see if we have one already */    attr = NSS_CMSAttributeArray_FindAttrByOidTag(*attrs, type, PR_FALSE);    if (attr == NULL) {	/* not found? create one! */	attr = NSS_CMSAttribute_Create(poolp, type, value, encoded);	if (attr == NULL)	    goto loser;	/* and add it to the list */	if (NSS_CMSArray_Add(poolp, (void ***)attrs, (void *)attr) != SECSuccess)	    goto loser;    } else {	/* found, shove it in */	/* XXX we need a decent memory model @#$#$!#!!! */	attr->values[0] = value;	attr->encoded = encoded;    }    PORT_ArenaUnmark (poolp, mark);    return SECSuccess;loser:    PORT_ArenaRelease (poolp, mark);    return SECFailure;}

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?