gsmsmsd.cc

对各种手机进行编程的工具包源码gsmlib 1.9版本。

        swHandshake = true;
        break;
      case 'I':
        initString = optarg;
        break;
      case 't':
        receiveStoreName = optarg;
        break;
      case 'd':
        device = optarg;
        break;
      case 'C':
        serviceCentreAddress = optarg;
        break;
      case 's':
        spoolDir = optarg;
        break;
      case 'f':
        flushSMS = true;
        break;
      case 'a':
        action = optarg;
        break;
      case 'b':
        baudrate = optarg;
        break;
      case 'v':
        cerr << argv[0] << stringPrintf(_(": version %s [compiled %s]"),
                                        VERSION, __DATE__) << endl;
        exit(0);
        break;
      case 'h':
        cerr << argv[0] << _(": [-a action][-b baudrate][-C sca][-d device]"
                             "[-f][-h][-I init string]\n"
                             "  [-s spool dir][-t][-v]{sms_type}")
             << endl << endl
             << _("  -a, --action      the action to execute when an SMS "
                  "arrives\n"
                  "                    (SMS is send to stdin of action)")
             << endl
             << _("  -b, --baudrate    baudrate to use for device "
                  "(default: 38400)")
             << endl
             << _("  -C, --sca         SMS service centre address") << endl
             << _("  -d, --device      sets the device to connect to") << endl
             << _("  -D, --direct      enable direct routing of SMSs") << endl
             << _("  -f, --flush       flush SMS from store") << endl
             << _("  -h, --help        prints this message") << endl
             << _("  -I, --init        device AT init sequence") << endl
             << _("  -r, --requeststat request SMS status report") << endl
             << _("  -s, --spool       spool directory for outgoing SMS")
             << endl
             << _("  -t, --store       name of SMS store to use for flush\n"
                  "                    and/or temporary SMS storage") << endl
             << endl
             << _("  -v, --version     prints version and exits") << endl
             << _("  -X, --xonxoff     switch on software handshake") << endl
             << endl
             << _("  sms_type may be any combination of") << endl << endl
             << _("    sms, no_sms     controls reception of normal SMS")
             << endl
             << _("    cb, no_cb       controls reception of cell broadcast"
                  " messages") << endl
             << _("    stat, no_stat   controls reception of status reports")
             << endl << endl
             << _("  default is \"sms cb stat\"") << endl << endl
             << _("If no action is given, the SMS is printed to stdout")
             << endl << endl;
        exit(0);
        break;
      case '?':
        throw GsmException(_("unknown option"), ParameterError);
        break;
      }
  
    // find out which kind of message to route
    for (int i = optind; i < argc; ++i)
    {
      string s = lowercase(argv[i]);
      if (s == "sms")
        enableSMS = true;
      else if (s == "no_sms")
        enableSMS = false;
      else if (s == "cb")
        enableCB = true;
      else if (s == "no_cb")
        enableCB = false;
      else if (s == "stat")
        enableStat = true;
      else if (s == "no_stat")
        enableStat = false;
    }

    // register signal handler for terminate signal
    struct sigaction terminateAction;
    terminateAction.sa_handler = terminateHandler;
    sigemptyset(&terminateAction.sa_mask);
    terminateAction.sa_flags = SA_RESTART;
    if (sigaction(SIGINT, &terminateAction, NULL) != 0 ||
        sigaction(SIGTERM, &terminateAction, NULL) != 0)
      throw GsmException(
        stringPrintf(_("error when calling sigaction() (errno: %d/%s)"), 
                     errno, strerror(errno)),
        OSError);

    // open GSM device
    MeTa m(new UnixSerialPort(device,
                              baudrate == "" ? DEFAULT_BAUD_RATE :
                              baudRateStrToSpeed(baudrate), initString,
                              swHandshake));
    me = &m;

    // if flush option is given get all SMS from store and dispatch them
    if (flushSMS)
    {
      if (receiveStoreName == "")
        throw GsmException(_("store name must be given for flush option"),
                           ParameterError);
      
      SMSStoreRef store = me->getSMSStore(receiveStoreName);
      for (SMSStore::iterator s = store->begin(); s != store->end(); ++s)
        if (! s->empty())
        {
          string result =  _("Type of message: ");
          switch (s->message()->messageType())
          {
          case SMSMessage::SMS_DELIVER:
            result += _("SMS message\n");
            break;
          case SMSMessage::SMS_SUBMIT_REPORT:
            result += _("submit report message\n");
            break;
          case SMSMessage::SMS_STATUS_REPORT:
            result += _("status report message\n");
            break;
          }
          result += s->message()->toString();
          doAction(action, result);
          store->erase(s);
        }
    }

    // set default SMS store if -t option was given or
    // read from ME otherwise
    if (receiveStoreName == "")
    {
      string dummy1, dummy2;
      m.getSMSStore(dummy1, dummy2, receiveStoreName );
    }
    else
      m.setSMSStore(receiveStoreName, 3);

    // switch message service level to 1
    // this enables SMS routing to TA
    m.setMessageService(1);

    // switch on SMS routing
    m.setSMSRoutingToTA(enableSMS, enableCB, enableStat,
                        onlyReceptionIndication);

    // register event handler
    m.setEventHandler(new EventHandler());
    
    // wait for new messages
    bool exitScheduled = false;
    while (1)
    {
      struct timeval timeoutVal;
      timeoutVal.tv_sec = 5;
      timeoutVal.tv_usec = 0;
      m.waitEvent(&timeoutVal);

      // if it returns, there was an event or a timeout
      while (newMessages.size() > 0)
      {
        // get first new message and remove it from the vector
        SMSMessageRef newSMSMessage = newMessages.begin()->_newSMSMessage;
        CBMessageRef newCBMessage = newMessages.begin()->_newCBMessage;
        GsmEvent::SMSMessageType messageType =
          newMessages.begin()->_messageType;
        int index = newMessages.begin()->_index;
        string storeName = newMessages.begin()->_storeName;
        newMessages.erase(newMessages.begin());

        // process the new message
        string result = _("Type of message: ");
        switch (messageType)
        {
        case GsmEvent::NormalSMS:
          result += _("SMS message\n");
          break;
        case GsmEvent::CellBroadcastSMS:
          result += _("cell broadcast message\n");
          break;
        case GsmEvent::StatusReportSMS:
          result += _("status report message\n");
          break;
        }
        if (! newSMSMessage.isnull())
          result += newSMSMessage->toString();
        else if (! newCBMessage.isnull())
          result += newCBMessage->toString();
        else
        {
          SMSStoreRef store = me->getSMSStore(storeName);

          if (messageType == GsmEvent::CellBroadcastSMS)
            result += (*store.getptr())[index].cbMessage()->toString();
          else
            result += (*store.getptr())[index].message()->toString();
            
          store->erase(store->begin() + index);
        }
        
        // call the action
        doAction(action, result);
      }

      // if no new SMS came in and program exit was scheduled, then exit
      if (exitScheduled)
        exit(0);
      
      // handle terminate signal
      if (terminateSent)
      {
        exitScheduled = true;
        // switch off SMS routing
        try
        {
          m.setSMSRoutingToTA(false, false, false);
        }
        catch (GsmException &ge)
        {
          // some phones (e.g. Motorola Timeport 260) don't allow to switch
          // off SMS routing which results in an error. Just ignore this.
        }
        // the AT sequences involved in switching of SMS routing
        // may yield more SMS events, so go round the loop one more time
      }

      // send spooled SMS
      if (! terminateSent)
        sendSMS(spoolDir, m.getAt());
    }
  }
  catch (GsmException &ge)
  {
    cerr << argv[0] << _("[ERROR]: ") << ge.what() << endl;
    if (ge.getErrorClass() == MeTaCapabilityError)
      cerr << argv[0] << _("[ERROR]: ")
           << _("(try setting sms_type, please refer to gsmsmsd manpage)")
           << endl;
    return 1;
  }
  return 0;
}