cat-id-tbl.c

对各种手机进行编程的工具包源码gsmlib 1.9版本。

/* Automatically generated by po2tbl.sed from gsmlib.pot.  */

#if HAVE_CONFIG_H
# include <config.h>
#endif

#include "libgettext.h"

const struct _msg_ent _msg_tbl[] = {
  {"", 1},
  {"could not execute '%s'", 2},
  {"error writing to '%s'", 3},
  {"error when calling opendir('%s')(errno: %d/%s)", 4},
  {"count not open SMS spool file %s", 5},
  {": version %s [compiled %s]", 6},
  {"\
: [-a action][-b baudrate][-C sca][-d device][-f][-h][-I init string]\n\
  [-s spool dir][-t][-v]{sms_type}", 7},
  {"\
  -a, --action      the action to execute when an SMS arrives\n\
                    (SMS is send to stdin of action)", 8},
  {"  -b, --baudrate    baudrate to use for device (default: 38400)", 9},
  {"  -C, --sca         SMS service centre address", 10},
  {"  -d, --device      sets the device to connect to", 11},
  {"  -D, --direct      enable direct routing of SMSs", 12},
  {"  -f, --flush       flush SMS from store", 13},
  {"  -h, --help        prints this message", 14},
  {"  -I, --init        device AT init sequence", 15},
  {"  -r, --requeststat request SMS status report", 16},
  {"  -s, --spool       spool directory for outgoing SMS", 17},
  {"\
  -t, --store       name of SMS store to use for flush\n\
                    and/or temporary SMS storage", 18},
  {"  -v, --version     prints version and exits", 19},
  {"  -X, --xonxoff     switch on software handshake", 20},
  {"  sms_type may be any combination of", 21},
  {"    sms, no_sms     controls reception of normal SMS", 22},
  {"    cb, no_cb       controls reception of cell broadcast messages", 23},
  {"    stat, no_stat   controls reception of status reports", 24},
  {"  default is \"sms cb stat\"", 25},
  {"If no action is given, the SMS is printed to stdout", 26},
  {"unknown option", 27},
  {"error when calling sigaction() (errno: %d/%s)", 28},
  {"store name must be given for flush option", 29},
  {"Type of message: ", 30},
  {"SMS message\n", 31},
  {"submit report message\n", 32},
  {"status report message\n", 33},
  {"cell broadcast message\n", 34},
  {"[ERROR]: ", 35},
  {"(try setting sms_type, please refer to gsmsmsd manpage)", 36},
  {"\
: [-b baudrate][-C sca][-d device][-h][-I init string]\n\
  [-t][-v][-X] phonenumber [text]", 37},
  {"  -d, --device      sets the destination device to connect to", 38},
  {"\
  -t, --test        convert text to GSM alphabet and vice\n\
                    versa, no SMS message is sent", 39},
  {"  phonenumber       recipient's phone number", 40},
  {"\
  text              optional text of the SMS message\n\
                    if omitted: read from stdin", 41},
  {"phone number and text missing", 42},
  {"more than two parameters given", 43},
  {"text is larger than 160 characters", 44},
  {"inserting '%s' tel# %s", 45},
  {" (index #%d)", 46},
  {"updating '%s' tel# %s to new tel# %s", 47},
  {"updating '%s' tel# %s to new tel# %s(index %d)", 48},
  {"deleting '%s' tel# %s", 49},
  {"\
: [-b baudrate][-c][-d device or file][-h][-I init string]\n\
  [-p phonebook name][-s device or file][-t charset][-v][-V][-y][-X]", 50},
  {"  -c, --copy        copy source entries to destination", 51},
  {"\
  -d, --destination sets the destination device to connect \n\
                    to, or the file to write", 52},
  {"  -D, --destination-backend sets the destination backend", 53},
  {"  -i, --index       takes index positions into account", 54},
  {"  -p, --phonebook   name of phonebook to use", 55},
  {"\
  -s, --source      sets the source device to connect to,\n\
                    or the file to read", 56},
  {"\
  -t, --charset     sets the character set to use for\n\
                    phonebook entries", 57},
  {"  -S, --source-backend sets the source backend", 58},
  {"  -V, --verbose     print detailed progress messages", 59},
  {"\
  -y, --synchronize synchronize destination with source\n\
                    entries (destination is overwritten)\n\
                    (see gsmpb(1) for details)", 60},
  {"both source and destination must be given", 61},
  {"phonebook name must be given", 62},
  {"\
text '%s' is too large to fit into destination (maximum size %d characters)", 63},
  {"\
phone number '%s' is too large to fit into destination (maximum size %d \
characters)", 64},
  {"active ", 65},
  {"inactive ", 66},
  {"number: ", 67},
  {"  subaddr: ", 68},
  {"  time: ", 69},
  {"<ME0>  Manufacturer: ", 70},
  {"<ME1>  Model: ", 71},
  {"<ME2>  Revision: ", 72},
  {"<ME3>  Serial Number: ", 73},
  {"<FUN>  Functionality Level: ", 74},
  {"unsupported", 75},
  {">  Status: ", 76},
  {"unknown", 77},
  {"current", 78},
  {"available", 79},
  {"forbidden", 80},
  {"  Long name: '", 81},
  {"  Short name: '", 82},
  {"  Numeric name: ", 83},
  {"  Mode: ", 84},
  {"automatic", 85},
  {"manual", 86},
  {"deregister", 87},
  {"manual/automatic", 88},
  {"  Voice", 89},
  {"  unknown", 90},
  {"  Data", 91},
  {"  Fax", 92},
  {"on", 93},
  {"off", 94},
  {"UnconditionalReason", 95},
  {"MobileBusyReason", 96},
  {"NoReplyReason", 97},
  {"NotReachableReason", 98},
  {"0 ME is powered by the battery", 99},
  {"1 ME has a battery connected, but is not powered by it", 100},
  {"2 ME does not have a battery connected", 101},
  {"3 Recognized power fault, calls inhibited", 102},
  {"unknown facility class parameter '%c'", 103},
  {"not enough parameters, minimum number of parameters is %d", 104},
  {"too many parameters, maximum number of parameters is %d", 105},
  {"\
: [-b baudrate][-d device][-h][-I init string][-o operation]\n\
  [-v][-X]{parameters}", 106},
  {"\
  -o, --operation   operation to perform on the mobile \n\
                    phone with the specified parameters", 107},
  {"\
  parameters        parameters to use for the operation\n\
                    (if an operation is given) or\n\
                    a specification which kind of\n\
                    information to read from the mobile phone", 108},
  {"\
Refer to gsmctl(1) for details on the available parameters and operations.", 109},
  {"unknown information parameter '%s'", 110},
  {"unknown opmode parameter '%s'", 111},
  {"unknown forward reason parameter '%s'", 112},
  {"unknown forward mode parameter '%s'", 113},
  {"unknown operation '%s'", 114},
  {"inserting entry #%d from source into destination", 115},
  {"incompatible options '%c' and '%c'", 116},
  {"\
: [-a][-b baudrate][-c][-C sca][-d device or file]\n\
  [-h][-I init string][-k][-l][-s device or file][-t SMS store name]\n\
  [-v][-V][-x][-X]{indices}|[phonenumber text]", 117},
  {"\
  -a, --add         add new SMS submit message\n\
                    (phonenumber and text) to destination", 118},
  {"\
  -c, --copy        copy source entries to destination\n\
                    (if indices are given, copy only these entries)", 119},
  {"\
  -d, --destination sets the destination device to\n\
                    connect to, or the file to write to", 120},
  {"\
  -k, --backup      backup new entries to destination\n\
                    (if indices are given, copy only these entries)", 121},
  {"  -l, --list        list source to stdout", 122},
  {"  -t, --store       name of SMS store to use", 123},
  {"  -x, --delete      delete entries denoted by indices", 124},
  {"no operation option given", 125},
  {"both source and destination required", 126},
  {"destination must not be given", 127},
  {"source required", 128},
  {"source must not be given", 129},
  {"destination required", 130},
  {"expected number, got '%s'", 131},
  {"not enough parameters given", 132},
  {"unexpected parameters", 133},
  {"store name must be given", 134},
  {"no index '%s' in source", 135},
  {"index #%d", 136},
  {"inserting new entry into destination", 137},
  {"deleting entry #%d from destination", 138},
  {"no index '%s' in destination", 139},
  {"unspecified ME/TA error", 140},
  {"ME/TA error '", 141},
  {"(code %s)", 142},
  {"ME/TA error '<unspecified>' (code not known)", 143},
  {"unexpected response '%s' when sending 'AT%s'", 144},
  {"unexpected character in PDU handshake", 145},
  {"phone failure", 146},
  {"no connection to phone", 147},
  {"phone adaptor link reserved", 148},
  {"operation not allowed", 149},
  {"operation not supported", 150},
  {"ph SIM PIN required", 151},
  {"SIM not inserted", 152},
  {"SIM PIN required", 153},
  {"SIM PUK required", 154},
  {"SIM failure", 155},
  {"SIM busy", 156},
  {"SIM wrong", 157},
  {"incorrect password", 158},
  {"SIM PIN2 required", 159},
  {"SIM PUK2 required", 160},
  {"memory full", 161},