📄 libnet-ospf.h
字号:
/* * $Id: libnet-ospf.h,v 1.1.1.1 2000/05/25 00:28:49 route Exp $ * * libnet-ospf.h - Network routine library headers header file * * Copyright (c) 1999 Andrew Reiter <areiter@bindview.com> * Bindview Development * * Copyright (c) 1998 - 2001 Mike D. Schiffman <mike@infonexus.com> * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */#ifndef __LIBNET_OSPF_H#define __LIBNET_OSPF_H#include <sys/types.h>/* * Not all OSes define this in /etc/protocols.. ie, solaris... */#ifndef IPPROTO_OSPF#define IPPROTO_OSPF 89#endif#define IPPROTO_OSPF_LSA 890 /* Made this up. Hope it's unused */#define OSPFVERSION 2#define LIBNET_MODX 4102 /* Used in LSA checksum *//* * OSPF header lengths. */#define LIBNET_OSPF_H 0x10 /* 16 bytes */#define LIBNET_HELLO_H 0x18 /* 24 bytes */#define LIBNET_DBD_H 0x8 /* 8 bytes */#define LIBNET_LSR_H 0xc /* 12 bytes */#define LIBNET_LSU_H 0x4 /* 4 bytes */#define LIBNET_LSA_H 0x14 /* 20 bytes */#define LIBNET_AUTH_H 0x8 /* 8 bytes */#define LIBNET_OSPF_CKSUM 0x10 /* 16 bytes *//* * Link State packet format lengths. */#define LIBNET_LS_RTR_LEN 0x10 /* 16 bytes */#define LIBNET_LS_NET_LEN 0x8 /* 8 bytes */#define LIBNET_LS_SUM_LEN 0xc /* 12 bytes */ #define LIBNET_LS_AS_EXT_LEN 0x10 /* 16 bytes */ /* * OSPFv2 Packet Header. */struct libnet_ospf_hdr{ u_char ospf_v; /* version */ u_char ospf_type; /* type */#define LIBNET_OSPF_UMD 0 /* UMd monitoring packet */#define LIBNET_OSPF_HELLO 1 /* HELLO packet */#define LIBNET_OSPF_DBD 2 /* DataBase Description Packet */#define LIBNET_OSPF_LSR 3 /* Link State Request Packet */#define LIBNET_OSPF_LSU 4 /* Link State Update Packet */#define LIBNET_OSPF_LSA 5 /* Link State Acknowledgement Packet */ u_short ospf_len; /* length */ struct in_addr ospf_rtr_id; /* source router ID */ struct in_addr ospf_area_id; /* roam ID */ u_short ospf_cksum; /* checksum */ u_short ospf_auth_type; /* authentication type */#define LIBNET_OSPF_AUTH_NULL 0 /* Null password */#define LIBNET_OSPF_AUTH_SIMPLE 1 /* Simple, plaintext, 8 char password */#define LIBNET_OSPF_AUTH_MD5 2 /* MD5 */};/* * OSPF authentication header. */struct libnet_auth_hdr{ u_short ospf_auth_null; /* NULL */ u_char ospf_auth_keyid; /* Authentication Key ID */ u_char ospf_auth_len; /* Auth data length */ u_int ospf_auth_seq; /* Cryptographic sequence number */};/* * Options used in multiple OSPF packets. * More info can be found in section A.2 of RFC 2328. */#define LIBNET_OPT_EBIT 0x02 /* Describes the way AS-external-LSAs are flooded */#define LIBNET_OPT_MCBIT 0x04 /* Whether or not IP multicast dgrams are fwdd */#define LIBNET_OPT_NPBIT 0x08 /* Describes handling of type-7 LSAs */#define LIBNET_OPT_EABIT 0x10 /* rtr's willingness to send/recv EA-LSAs */#define LIBNET_OPT_DCBIT 0x20 /* Describes handling of demand circuits *//* * OSPF HELLO Packet Header. */struct libnet_ospf_hello_hdr{ struct in_addr hello_nmask; /* Netmask associated with the interface */ u_short hello_intrvl; /* Num of seconds between routers last packet */ u_char hello_opts; /* Options for HELLO packets (look above) */ u_char hello_rtr_pri; /* Router's priority (if 0, can't be backup) */ u_int hello_dead_intvl; /* # of secs a router is silent till deemed down */ struct in_addr hello_des_rtr; /* Designated router on the network */ struct in_addr hello_bkup_rtr; /* Backup router */ struct in_addr hello_nbr; /* neighbor router, memcpy more as needed */};/* * Database Description header. */struct libnet_dbd_hdr{ u_short dbd_mtu_len; /* Max length of IP dgram that this 'if' can use */ u_char dbd_opts; /* DBD packet options (look above) */ u_char dbd_type; /* Type of exchange occurring (look below) */#define LIBNET_DBD_IBIT 0x01 /* Init Bit */#define LIBNET_DBD_MBIT 0x02 /* Says more DBD packets are to come */#define LIBNET_DBD_MSBIT 0x04 /* If 1, sender is the master in the exchnge */ u_int dbd_seq; /* DBD sequence number */};/* * Used for the LS type field in all LS* headers. */#define LIBNET_LS_TYPE_RTR 1 /* Router-LSA */#define LIBNET_LS_TYPE_NET 2 /* Network-LSA */#define LIBNET_LS_TYPE_IP 3 /* Summary-LSA (IP Network) */#define LIBNET_LS_TYPE_ASBR 4 /* Summary-LSA (ASBR) */#define LIBNET_LS_TYPE_ASEXT 5 /* AS-External-LSA *//* * Link State Request header. */struct libnet_lsr_hdr{ u_int lsr_type; /* Type of LS being requested (see below) */ u_int lsr_lsid; /* Link State ID */ struct in_addr lsr_adrtr; /* advertising router (memcpy more as needed) */};/* * Link State Update header. */struct libnet_lsu_hdr{ u_int lsu_num; /* Number of LSAs that will be broadcasted */};/* * Link State Acknowledgement header. */struct libnet_lsa_hdr{ u_short lsa_age; /* Time in seconds since the LSA was originated */ u_char lsa_opts; /* Look above for OPTS_* */ u_char lsa_type; /* Look below for LS_TYPE_* */ u_int lsa_id; /* Link State ID */ struct in_addr lsa_adv; /* Router ID of Advertising router */ u_int lsa_seq; /* LSA sequence number to detect old/bad ones */ u_char lsa_cksum[2]; /* "Fletcher Checksum" of all fields minus age */ u_short lsa_len; /* Length in bytes including the 20 byte header */};/* * Router LSA data format * * Other stuff for TOS can be added for backward compatability, for this * version, only OSPFv2 is being FULLY supported. */struct libnet_rtr_lsa_hdr{ u_short rtr_flags; /* Set to help describe packet */#define LIBNET_RTR_FLAGS_W 0x0100 /* W bit */#define LIBNET_RTR_FLAGS_E 0x0200 /* E bit */#define LIBNET_RTR_FLAGS_B 0x0400 /* B bit */ u_short rtr_num; /* Number of links within that packet */ u_int rtr_link_id; /* Describes link_data (look below) */#define LIBNET_LINK_ID_NBR_ID 1 /* Neighbors router ID, also can be 4 */#define LIBNET_LINK_ID_IP_DES 2 /* IP address of designated router */#define LIBNET_LINK_ID_SUB 3 /* IP subnet number */ u_int rtr_link_data; /* Depending on link_id, info is here */ u_char rtr_type; /* Description of router link */#define LIBNET_RTR_TYPE_PTP 1 /* Point-To-Point */#define LIBNET_RTR_TYPE_TRANS 2 /* Connection to a "transit network" */#define LIBNET_RTR_TYPE_STUB 3 /* Connectin to a "stub network" */#define RTR_TYPE_VRTL 4 /* Connects to a "virtual link" */ u_char rtr_tos_num; /* Number of different TOS metrics for this link */ u_short rtr_metric; /* The "cost" of using this link */};/* * Network LSA data format. */struct libnet_net_lsa_hdr{ struct in_addr net_nmask; /* Netmask for that network */ u_int net_rtr_id; /* ID of router attached to that network */};/* * Summary LSA data format. */struct libnet_sum_lsa_hdr{ struct in_addr sum_nmask; /* Netmask of destination IP address */ u_int sum_metric; /* Same as in rtr_lsa (&0xfff to use last 24bit) */ u_int sum_tos_metric; /* first 8bits are TOS, 24bits are TOS Metric */};/* * AS External LSA data format. * & 0xfff logic operator for as_metric to get last 24bits. */struct libnet_as_lsa_hdr{ struct in_addr as_nmask; /* Netmask for advertised destination */ u_int as_metric; /* May have to set E bit in first 8bits */#define LIBNET_AS_E_BIT_ON 0x80000000 /* as_metric */ struct in_addr as_fwd_addr; /* Forwarding address */ u_int as_rte_tag; /* External route tag */};intlibnet_build_ospf( u_short, u_char, u_long, u_long, u_short, const char *, int, u_char * ); intlibnet_build_ospf_hello( u_long, u_short, u_char, u_char, u_int, u_long, u_long, u_long, const char *, int, u_char * );intlibnet_build_ospf_dbd( u_short, u_char, u_char, u_int, const char *, int, u_char * );intlibnet_build_ospf_lsr( u_int, u_int, u_long, const char *, int, u_char * );intlibnet_build_ospf_lsu( u_int, const char *, int, u_char * );intlibnet_build_ospf_lsa( u_short, u_char, u_char, u_int, u_long, u_int, u_short, const char *, int, u_char * );intlibnet_build_ospf_lsa_rtr( u_short, u_short, u_int, u_int, u_char, u_char, u_short, const char *, int, u_char * );intlibnet_build_ospf_lsa_net( u_long, u_int, const char *, int, u_char * );intlibnet_build_ospf_lsa_sum( u_long, u_int, u_int, const char *, int, u_char * );intlibnet_build_ospf_lsa_as( u_long, u_int, u_long, u_int, const char *, int, u_char * );voidlibnet_ospf_lsa_checksum( u_char *, int );#endif /* __LIBNET_OSPF_H */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -