📄 7_3_01.txt
字号:
racy of this filter is not critical but the relative transmittance
at the carrier frequency should be 0.5 with a tolerance of _ | .05
and the characteristic should be sensibly symmetrical about the
carrier frequency.
Figure 3/T.3, (M) p.
7.4 The receiving apparatus must be capable of operating
correctly when the drift of carrier frequency does not exceed its
nominal value by more than _ | 6 Hz.
7.5 A fixed compromise equalizer, an automatic equalizer or an
adaptive equalizer may be provided in the receiver but this should
be a matter for further study.
8 Power at the transmitter output
The power of the white signal should be adjustable from
-15 dBm to 0 dBm but the equipment should be so designed that there
is no possibility of this adjustment being tampered with by an
operator. The black level should be at least 26 dB below the white
level.
9 Power at the receiver input
The receiving apparatus should be capable of functioning
correctly when the received signal level for white is within the
range 0 dBm to -40 dBm, the latter value being considered provi-
sional. No control of receiver sensitivity should be provided for
operator use.
APPENDIX I
(to Recommendation T.3)
Guaranteed
reproducible area for Group 2 machines
conforming to Recommendation T.3
Figure I-1/T.3, (M), p.6
I.1 Horizontal loss
Figure I-2/T.3, (M), p.7
H.T. [T1.3]
TABLE I-1/T/3
Results
_____________________________________________________________
Left margin (mm) Right margin (mm)
Horizontal losses 205 210 205 210
_____________________________________________________________
|
|
|
|
|
|
_________________________________________________________________________________
Transmitter a _0.5% 1.11 1.11 1.11 1.11
Phasing Receiver b _1.0% 2.22 2.22 2.22|
|
2.22
_________________________________________________________________________________
Skew c {
_5 x 10 | uDlF2616
} 2.46 2.46 2.46 2.46
_________________________________________________________________________________
Enlarging d - - 6.46 6.62
_________________________________________________________________________________
Paper insertion f 1.50 1.50 1.50 1.50
_________________________________________________________________________________
Min. x - - 1.00 1.00
Lost time Max. x 5.00 - - -
_________________________________________________________________________________
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tableau I-1/T.3 [T1.3], p.8
I.2 Vertical loss
Figure I-3/T.3, (M), p.9
H.T. [T2.3]
TABLE I-2/T.3
___________________________________________________
Top (mm) Bottom (mm)
___________________________________________________
Gripping loss g 4.0 4.0
___________________________________________________
Paper insertion h
___________________________________________________
Enlarging + FOC i - 15.15
___________________________________________________
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -