⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 globals.h

📁 完整的解压zip文件的源码。包含密码功能
💻 H
字号:
/*---------------------------------------------------------------------------  globals.h  There is usually no need to include this file since unzip.h includes it.  This header file is used by all of the UnZip source files.  It contains  a struct definition that is used to "house" all of the global variables.  This is done to allow for multithreaded environments (OS/2, NT, Win95,  Unix) to call UnZip through an API without a semaphore.  REENTRANT should  be defined for all platforms that require this.  GLOBAL CONSTRUCTOR AND DESTRUCTOR (API WRITERS READ THIS!!!)  ------------------------------------------------------------  No, it's not C++, but it's as close as we can get with K&R.  The main() of each process that uses these globals must include the  CONSTRUCTGLOBALS; statement.  This will malloc enough memory for the  structure and initialize any variables that require it.  This must  also be done by any API function that jumps into the middle of the  code.  The DESTROYGLOBALS; statement should be inserted before EVERY "EXIT(n)".  Naturally, it also needs to be put before any API returns as well.  In fact, it's much more important in API functions since the process  will NOT end, and therefore the memory WON'T automatically be freed  by the operating system.  USING VARIABLES FROM THE STRUCTURE  ----------------------------------  All global variables must now be prefixed with `G.' which is either a  global struct (in which case it should be the only global variable) or  a macro for the value of a local pointer variable that is passed from  function to function.  Yes, this is a pain.  But it's the only way to  allow full reentrancy.  ADDING VARIABLES TO THE STRUCTURE  ---------------------------------  If you make the inclusion of any variables conditional, be sure to only  check macros that are GUARANTEED to be included in every module.  For instance, newzip and pwdarg are needed only if CRYPT is TRUE,  but this is defined after unzip.h has been read.  If you are not careful,  some modules will expect your variable to be part of this struct while  others won't.  This will cause BIG problems. (Inexplicable crashes at  strange times, car fires, etc.)  When in doubt, always include it!  Note also that UnZipSFX needs a few variables that UnZip doesn't.  However,  it also includes some object files from UnZip.  If we were to conditionally  include the extra variables that UnZipSFX needs, the object files from  UnZip would not mesh with the UnZipSFX object files.  Result: we just  include the UnZipSFX variables every time.  (It's only an extra 4 bytes  so who cares!)  ADDING FUNCTIONS  ----------------  To support this new global struct, all functions must now conditionally  pass the globals pointer (pG) to each other.  This is supported by 5 macros:  __GPRO, __GPRO__, __G, __G__ and __GDEF.  A function that needs no other  parameters would look like this:    int extract_or_test_files(__G)      __GDEF    {       ... stuff ...    }  A function with other parameters would look like:    int memextract(__G__ tgt, tgtsize, src, srcsize)        __GDEF        uch *tgt, *src;        ulg tgtsize, srcsize;    {      ... stuff ...    }  In the Function Prototypes section of unzpriv.h, you should use __GPRO and  __GPRO__ instead:    int  uz_opts                   OF((__GPRO__ int *pargc, char ***pargv));    int  process_zipfiles          OF((__GPRO));  Note that there is NO comma after __G__ or __GPRO__ and no semi-colon after  __GDEF.  I wish there was another way but I don't think there is.  TESTING THE CODE  -----------------  Whether your platform requires reentrancy or not, you should always try  building with REENTRANT defined if any functions have been added.  It is  pretty easy to forget a __G__ or a __GDEF and this mistake will only show  up if REENTRANT is defined.  All platforms should run with REENTRANT  defined.  Platforms that can't take advantage of it will just be paying  a performance penalty needlessly.  SIGNAL MADNESS  --------------  This whole pointer passing scheme falls apart when it comes to SIGNALs.  I handle this situation 2 ways right now.  If you define USETHREADID,  UnZip will include a 64-entry table.  Each entry can hold a global  pointer and thread ID for one thread.  This should allow up to 64  threads to access UnZip simultaneously.  Calling DESTROYGLOBALS()  will free the global struct and zero the table entry.  If somebody  forgets to call DESTROYGLOBALS(), this table will eventually fill up  and UnZip will exit with an error message.  A good way to test your  code to make sure you didn't forget a DESTROYGLOBALS() is to change  THREADID_ENTRIES to 3 or 4 in globals.c, making the table real small.  Then make a small test program that calls your API a dozen times.  Those platforms that don't have threads still need to be able to compile  with REENTRANT defined to test and see if new code is correctly written  to work either way.  For these platforms, I simply keep a global pointer  called GG that points to the Globals structure.  Good enough for testing.  I believe that NT has thread level storage.  This could probably be used  to store a global pointer for the sake of the signal handler more cleanly  than my table approach.  ---------------------------------------------------------------------------*/#ifndef __globals_h#define __globals_h#ifdef USE_ZLIB#  include "zlib.h"#endif/*************//*  Globals  *//*************/typedef struct Globals {#ifdef DLL    zvoid *callerglobs; /* pointer to structure of pass-through global vars */#endif    /* command options of general use */    UzpOpts UzO;        /* command options of general use */#ifndef FUNZIP    /* command options specific to the high level command line interface */#ifdef MORE    int M_flag;         /* -M: built-in "more" function */#endif    /* internal flags and general globals */#ifdef MORE    int height;           /* check for SIGWINCH, etc., eventually... */#endif                    /* (take line-wrapping into account?) */#if (defined(IZ_CHECK_TZ) && defined(USE_EF_UT_TIME))    int tz_is_valid;      /* indicates that timezone info can be used */#endif#ifdef WINDLL    int prompt_always;    /* prompt to overwrite if TRUE */#endif    int noargs;           /* did true command line have *any* arguments? */    unsigned filespecs;   /* number of real file specifications to be matched */    unsigned xfilespecs;  /* number of excluded filespecs to be matched */    int process_all_files;    int create_dirs;      /* used by main(), mapname(), checkdir() */    int extract_flag;    int newzip;           /* reset in extract.c; used in crypt.c */    LONGINT   real_ecrec_offset;    LONGINT   expect_ecrec_offset;    long csize;           /* used by decompr. (NEXTBYTE): must be signed */    long ucsize;          /* used by unReduce(), explode() */    long used_csize;      /* used by extract_or_test_member(), explode() */#ifdef DLL     int fValidate;       /* true if only validating an archive */     int filenotfound;     int redirect_data;   /* redirect data to memory buffer */     int redirect_text;   /* redirect text output to buffer */# ifndef NO_SLIDE_REDIR     int redirect_slide;  /* redirect decompression area to mem buffer */     unsigned _wsize;# endif     unsigned redirect_size;       /* size of redirected output buffer */     uch *redirect_buffer;         /* pointer to head of allocated buffer */     uch *redirect_pointer;        /* pointer past end of written data */# ifndef NO_SLIDE_REDIR     uch *redirect_sldptr;         /* head of decompression slide buffer */# endif# ifdef OS2DLL     cbList(processExternally);    /* call-back list */# endif#endif /* DLL */    char **pfnames;    char **pxnames;    char sig[4];    char answerbuf[10];    min_info info[DIR_BLKSIZ];    min_info *pInfo;#endif /* !FUNZIP */    union work area;                /* see unzpriv.h for definition of work */#ifndef FUNZIP#  if (!defined(USE_ZLIB) || defined(USE_OWN_CRCTAB))    ZCONST ulg near *crc_32_tab;#  else    ZCONST ulg Far *crc_32_tab;#  endif#endif    ulg       crc32val;             /* CRC shift reg. (was static in funzip) */#ifdef FUNZIP    FILE     *in;                   /* file descriptor of compressed stream */#endif    uch       *inbuf;               /* input buffer (any size is OK) */    uch       *inptr;               /* pointer into input buffer */    int       incnt;#ifndef FUNZIP    ulg       bitbuf;    int       bits_left;            /* unreduce and unshrink only */    int       zipeof;    char      *argv0;               /* used for NT and EXE_EXTENSION */    char      *wildzipfn;    char      *zipfn;    /* GRR:  WINDLL:  must nuke any malloc'd zipfn... */#ifdef USE_STRM_INPUT    FILE      *zipfd;               /* zipfile file descriptor */#else    int       zipfd;                /* zipfile file handle */#endif    LONGINT   ziplen;    LONGINT   cur_zipfile_bufstart; /* extract_or_test, readbuf, ReadByte */    LONGINT   extra_bytes;          /* used in unzip.c, misc.c */    uch       *extra_field;         /* Unix, VMS, Mac, OS/2, Acorn, ... */    uch       *hold;    local_file_hdr  lrec;          /* used in unzip.c, extract.c */    cdir_file_hdr   crec;          /* used in unzip.c, extract.c, misc.c */    ecdir_rec       ecrec;         /* used in unzip.c, extract.c */    struct stat     statbuf;       /* used by main, mapname, check_for_newer */    int      mem_mode;    uch      *outbufptr;           /* extract.c static */    ulg      outsize;              /* extract.c static */    int      reported_backslash;   /* extract.c static */    int      disk_full;    int      newfile;    int      didCRlast;            /* fileio static */    ulg      numlines;             /* fileio static: number of lines printed */    int      sol;                  /* fileio static: at start of line */    int      no_ecrec;             /* process static */#ifdef SYMLINKS    int      symlnk;#endif#ifdef NOVELL_BUG_FAILSAFE    int      dne;                  /* true if stat() says file doesn't exist */#endif    FILE     *outfile;    uch      *outbuf;    uch      *realbuf;#ifndef VMS                        /* if SMALL_MEM, outbuf2 is initialized in */    uch      *outbuf2;             /*  process_zipfiles() (never changes); */#endif                             /*  else malloc'd ONLY if unshrink and -a */#endif /* !FUNZIP */    uch      *outptr;    ulg      outcnt;               /* number of chars stored in outbuf */#ifndef FUNZIP    char     filename[FILNAMSIZ];  /* also used by NT for temporary SFX path */#ifdef CMS_MVS    char     *tempfn;              /* temp file used; erase on close */#endif    char *key;         /* crypt static: decryption password or NULL */    int nopwd;         /* crypt static */#endif /* !FUNZIP */    ulg keys[3];       /* crypt static: keys defining pseudo-random sequence */#if (!defined(DOS_FLX_H68_OS2_W32) && !defined(AMIGA) && !defined(RISCOS))#if (!defined(MACOS) && !defined(ATARI) && !defined(VMS))    int echofd;        /* ttyio static: file descriptor whose echo is off */#endif /* !(MACOS || ATARI || VMS) */#endif /* !(DOS_FLX_H68_OS2_W32 || AMIGA || RISCOS) */    unsigned hufts;    /* track memory usage */#ifdef USE_ZLIB    int inflInit;             /* inflate static: zlib inflate() initialized */    z_stream dstrm;           /* inflate global: decompression stream */#else    struct huft *fixed_tl;    /* inflate static */    struct huft *fixed_td;    /* inflate static */    int fixed_bl, fixed_bd;   /* inflate static */    unsigned wp;              /* inflate static: current position in slide */    ulg bb;                   /* inflate static: bit buffer */    unsigned bk;              /* inflate static: bits in bit buffer */#endif /* ?USE_ZLIB */#ifndef FUNZIP#ifdef SMALL_MEM    char rgchBigBuffer[512];    char rgchSmallBuffer[96];    char rgchSmallBuffer2[160];  /* boosted to 160 for local3[] in unzip.c */#endif    MsgFn *message;    InputFn *input;    PauseFn *mpause;    PasswdFn *decr_passwd;    StatCBFn *statreportcb;#ifdef WINDLL    LPUSERFUNCTIONS lpUserFunctions;#endif    int incnt_leftover;       /* so improved NEXTBYTE does not waste input */    uch *inptr_leftover;#ifdef VMS_TEXT_CONV    int VMS_line_state;       /* so native VMS variable-length text files are */    int VMS_line_length;      /*  readable on other platforms */    int VMS_line_pad;#endif#endif /* !FUNZIP */#ifdef SYSTEM_SPECIFIC_GLOBALS    SYSTEM_SPECIFIC_GLOBALS#endif} Uz_Globs;  /* end of struct Globals *//***************************************************************************/#ifdef FUNZIP#  if (!defined(USE_ZLIB) || defined(USE_OWN_CRCTAB))     extern ZCONST ulg near  crc_32_tab[256];#  else     extern ZCONST ulg Far *crc_32_tab;#  endif#  define CRC_32_TAB  crc_32_tab#else#  define CRC_32_TAB  G.crc_32_tab#endifUz_Globs *globalsCtor   OF((void));/* pseudo constant sigs; they are initialized at runtime so unzip executable * won't look like a zipfile */extern char local_hdr_sig[4];extern char central_hdr_sig[4];extern char end_central_sig[4];/* extern char extd_local_sig[4];  NOT USED YET */#ifdef REENTRANT#  define G                   (*(Uz_Globs *)pG)#  define __G                 pG#  define __G__               pG,#  define __GPRO              Uz_Globs *pG#  define __GPRO__            Uz_Globs *pG,#  define __GDEF              Uz_Globs *pG;#  ifdef  USETHREADID     extern int               lastScan;     void deregisterGlobalPointer OF((__GPRO));     Uz_Globs *getGlobalPointer   OF((void));#    define GETGLOBALS()      Uz_Globs *pG = getGlobalPointer();#    define DESTROYGLOBALS()  {free_G_buffers(pG); deregisterGlobalPointer(pG);}#  else     extern Uz_Globs          *GG;#    define GETGLOBALS()      Uz_Globs *pG = GG;#    define DESTROYGLOBALS()  {free_G_buffers(pG); free(pG);}#  endif /* ?USETHREADID */#  define CONSTRUCTGLOBALS()  Uz_Globs *pG = globalsCtor()#else /* !REENTRANT */   extern Uz_Globs            G;#  define __G#  define __G__#  define __GPRO              void#  define __GPRO__#  define __GDEF#  define GETGLOBALS()#  define CONSTRUCTGLOBALS()  globalsCtor()#  define DESTROYGLOBALS()#endif /* ?REENTRANT */#define uO              G.UzO#endif /* __globals_h */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -