makefile.os2

infozip2.2源码

# Makefile for Zip, ZipCloak, ZipNote and ZipSplit

# Supported Make utilities:
# - Microsoft/IBM nmake
# - dmake 3.8 or higher
# - GNU make, at least version 3.68
# - NOT watcom make
# For Microsoft and Watcom C, better use NMAKE,
# otherwise it doesn't matter.

# Supported 16-bit C Compilers (created programs run under OS/2 1.x and 2.x):
# - Microsoft C 6.00A
# - Watcom C/C++ 16-bit

# Supported 32-bit C Compilers (created programs run under OS/2 2.x only):
# - GNU gcc (emx kit 0.9c or newer)
# - IBM C Set/2 or C Set++   - does not yet work with ASM code
# - Watcom C/C++ 32-bit      - does not yet work with ASM code
# - Borland C++              - no ASM code yet
# - MetaWare High C/C++      - no ASM code yet

# Supported Cross-Compilers for MS-DOS:
# - Microsoft C 6.00A (16-bit)
# - Watcom C/C++ (16- and 32-bit)
# - GNU gcc (emx kit 0.9c or newer, 32-bit)

# Supported Cross-Compilers for Win32 (WinNT/Win95):
# - GNU gcc (emx kit 0.9c or newer, with RSXNT 1.3 or newer)

# Supported Assemblers:
# - Microsoft MASM 6.00 with Microsoft C, IBM C
# - Watcom WASM with Watcom C/C++
# - GNU as with GNU gcc

# To use MASM 5.x instead of MASM 6.00:
# - set AS="masm -T -Ml"
# - set ASEOL=";"


# To use, enter "make/nmake/dmake -f os2/makefile.os2"
# (this makefile depends on its name being "os2/makefile.os2").

# Add -DNO_ASM to CFLAGS and define OBJA to `nothing' if you do not have
# masm or ml.
# Add -DDYN_ALLOC to ASFLAGS if you have defined it in tailor.h or CFLAGS

# Note: assembly language modules are really only supported for
# Microsoft 16-bit and GNU gcc 32-bit compilation.

# Notes on 16-bit (Microsoft C 6.00) compilation:

#   The resulting programs can be used under OS/2 protected mode only.
#   A larger stack has to be used for OS/2 because system calls
#   use more stack than under DOS, 8k is recommended by Microsoft.
#   Note that __STDC__ has to be defined explicitly with C 6.00 when -Ze
#   is given, because Microsoft disables __STDC__ when their extensions
#   are enabled. This is different from the C 5.10 behaviour.

# Notes on 32-bit OS/2 compilation:

#   The resulting programs can be used under OS/2 protected
#   mode of OS/2 2.x only, not under 1.x and not under DOS.
#   It makes no difference if __STDC__ is defined or not.
#   Borland C++ works with DYN_ALLOC only.

# Special Notes on IBM C/C++ compilation:

#   The older C compiler (C Set/2) breaks, while optimizing, on deflate.c
#   and trees.c (generates incorrect code). The newer C++ compiler (C Set++)
#   doesn't but instead breaks on crypt.c in the initial version and up to
#   CSD level 003. Starting with CSD level 004, it doesn't break any longer.

# Notes on Watcom C/C++ compilation for DOS with the PMODE/W extender:
#
#   You need to add the following section to your \watcom\binb\wlsystem.lnk
#   file and also need to copy pmodew.exe to the same directory:
#
#   system begin pmodew
#       option osname='PMODE/W'
#       libpath %WATCOM%\lib386
#       libpath %WATCOM%\lib386\dos
#       op stub=pmodew.exe
#       format os2 le
#   end
#
#   PMODE/W 1.16 or higher is required.


default:
	@echo "Enter $(MAKE) -f os2/makefile.os2 target"
	@echo "where target is one of:"
	@echo "   msc mscdos ibm ibmdyn ibmdebug ibmprof"
	@echo "   metaware borland gcc gccdyn gccdebug gccdos gccwin32"
	@echo "   watcom watcom16 watcomdos watcom16dos pmodew"

# MS C 6.00 for OS/2, 16-bit
msc:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="cl -nologo -AL -Ocegit -Gs $(FP)" \
	CFLAGS="-W1 -Zep -J -G2 -D__STDC__ -DOS2 -DASM_CRC" \
	AS="ml -nologo -c -Zm -Cp" \
	ASFLAGS="-D__LARGE__ -D__286" \
	LDFLAGS="-F 2000 -Lp -Fe" \
	LDFLAGS2="-link /noe /pm:vio" \
	OUT="-Fo" \
	OBJ=".obj" \
	CRC32="crc_i86" \
	OBJA="match.obj" \
	DEF="os2\zip.def"

# MS C 6.00 for OS/2, 16-bit, debug
mscdebug:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="cl -nologo -AL -Zi -Od $(FP)" \
	CFLAGS="-W1 -Zep -J -G2 -D__STDC__ -DOS2 -DASM_CRC" \
	AS="ml -nologo -c -Zim -Cp" \
	ASFLAGS="-D__LARGE__ -D__286" \
	LDFLAGS="-F 2000 -Lp -Fe" \
	LDFLAGS2="-link /noe /pm:vio" \
	OUT="-Fo" \
	OBJ=".obj" \
	CRC32="crc_i86" \
	OBJA="match.obj" \
	DEF="os2\zip.def"

# crosscompilation for MS-DOS with MS C 6.00
mscdos:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="cl -nologo -AL -Ocegit -Gs $(FP)" \
	CFLAGS="-W1 -Zep -J -D__STDC__ -DDOS -DASM_CRC -DDYN_ALLOC" \
	AS="ml -nologo -c -Zm -Cp" \
	ASFLAGS="-D__LARGE__ -DDYN_ALLOC" \
	LDFLAGS="-F 2000 -Lr -Fe" \
	LDFLAGS2="-link /noe /exe" \
	OUT="-Fo" \
	OBJ=".obj" \
	CRC32="crc_i86" \
	OBJA="match.obj" \
	OBJ2="msdos.obj" OBJU2="msdos_.obj" \
	OSDEP_H="msdos/osdep.h" ZIPUP_H="msdos/zipup.h"


# IBM C Set/2, statically linked runtime
ibm:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="icc -Q -O -Gs" \
	CFLAGS="-Sm -Sp1 -DOS2 -DNO_ASM" \
	AS="ml -nologo -c -Zm -Cp" \
	ASFLAGS="" \
	LDFLAGS="-B/ST:0x50000 -Fe" \
	LDFLAGS2="" \
	OUT="-Fo" \
	OBJ=".obj" \
	OBJA="" \
	DEF="os2/zip.def"

# IBM C Set/2, dynamically linked runtime
ibmdyn:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="icc -Q -O -Gd -Gs" \
	CFLAGS="-Sm -Sp1 -DOS2 -DNO_ASM" \
	AS="ml -nologo -c -Zm -Cp" \
	ASFLAGS="" \
	LDFLAGS="-B/ST:0x50000 -Fe" \
	LDFLAGS2="" \
	OUT="-Fo" \
	OBJ=".obj" \
	OBJA="" \
	DEF="os2/zip.def"

# IBM C Set/2, debug version
ibmdebug:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="icc -Q -Ti" \
	CFLAGS="-Sm -Sp1 -DOS2 -DNO_ASM -Tm" \
	AS="ml -nologo -c -Zim -Cp" \
	ASFLAGS="" \
	LDFLAGS="-B/ST:0x50000 -Fe" \
	LDFLAGS2="" \
	OUT="-Fo" \
	OBJ=".obj" \
	OBJA="" \
	DEF="os2/zip.def"

# IBM C Set/2, profiling version for PROFIT
ibmprof:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="icc -Q -O -Gs -Gh -Ti" \
	CFLAGS="-Sm -Sp1 -DOS2 -DNO_ASM" \
	AS="ml -nologo -c -Zm -Cp" \
	ASFLAGS="" \
	LDFLAGS="-B/ST:0x50000 -Fe" \
	LDFLAGS2="profit.obj" \
	OUT="-Fo" \
	OBJ=".obj" \
	OBJA="" \
	DEF="os2/zip.def"

# Watcom C/386 9.0 or higher
watcom:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="wcl386 -bt=os2v2 -zq -Ox -s" \
	CFLAGS="-Zp1 -DOS2 -DNO_ASM" \
	AS="wasm -bt=os2v2 -3p" \
	ASFLAGS="" \
	LDFLAGS="-k0x50000 -x -l=os2v2 -Fe=" \
	LDFLAGS2="" \
	OUT="-Fo" \
	OBJ=".obj" \
	OBJA="" \
	DIRSEP="\\" \
	AS_DIRSEP="\\"

# Watcom C/286 9.0 or higher
watcom16:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="wcl -bt=os2 -zq -ml -Ox -s" \
	CFLAGS="-Zp1 -DOS2 -DNO_ASM" \
	AS="wasm -bt=os2 -3p" \
	ASFLAGS="" \
	LDFLAGS="/\"option newfiles\" -k0x3000 -x -l=os2 -Fe=" \
	LDFLAGS2="" \
	OUT="-Fo" \
	OBJ=".obj" \
	OBJA="" \
	DIRSEP="\\" \
	AS_DIRSEP="\\"

# Watcom C/386 9.0 or higher, crosscompilation for DOS, DOS4GW extender
watcomdos:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="wcl386 -bt=dos4g -zq -Ox -s" \
	CFLAGS="-Zp1 -DDOS -DMSDOS -DNO_ASM" \
	AS="wasm -bt=dos4g -3p" \
	ASFLAGS="" \
	LDFLAGS="-k0x50000 -x -l=dos4g -Fe=" \
	LDFLAGS2="" \
	OUT="-Fo" \
	OBJ=".obj" \
	OBJA="" \
	OBJ2="msdos.obj" \
	OBJU2="msdos_.obj" \
	OSDEP_H="msdos/osdep.h" \
	ZIPUP_H="msdos/zipup.h" \
	DIRSEP="\\" \
	AS_DIRSEP="\\"

# Watcom C/386 9.0 or higher, crosscompilation for DOS, PMODE/W extender
pmodew:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="wcl386 -bt=dos4g -zq -Ox -s" \
	CFLAGS="-Zp1 -DDOS -DMSDOS -DASM_CRC" \
	AS="wasm -bt=dos4g -3p" \
	ASFLAGS="" \
	LDFLAGS="-k0x50000 -x -l=pmodew -Fe=" \
	LDFLAGS2="" \
	OUT="-Fo" \
	OBJ=".obj" \
	CRC32="crc_i386" \
	OBJA="match32.obj" \
	OBJ2="msdos.obj" \
	OBJU2="msdos_.obj" \
	OSDEP_H="msdos/osdep.h" \
	ZIPUP_H="msdos/zipup.h" \
	DIRSEP="\\" \
	AS_DIRSEP="\\"

# Watcom C/286 9.0 or higher, crosscompilation for DOS
watcom16dos:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="wcl -bt=dos -zq -ml -Ox -s" \
	CFLAGS="-Zp1 -DDOS -DMSDOS -DDYN_ALLOC -DNO_ASM" \
	AS="wasm -bt=dos -3p" \
	ASFLAGS="-DDYN_ALLOC" \
	LDFLAGS="-k0x2000 -x -l=dos -Fe=" \
	LDFLAGS2="" \
	OUT="-Fo" \
	OBJ=".obj" \
	OBJA="" \
	OBJ2="msdos.obj" \
	OBJU2="msdos_.obj" \
	OSDEP_H="msdos/osdep.h" \
	ZIPUP_H="msdos/zipup.h" \
	DIRSEP="\\" \
	AS_DIRSEP="\\"

# MetaWare High C/C++ 3.2
metaware:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="hc -O2" \
	CFLAGS="-D__32BIT__ -DOS2 -DNO_ASM" \
	AS="ml -nologo -c -Zm -Cp" \
	ASFLAGS="" \
	LDFLAGS="-o " \
	LDFLAGS2="" \
	OUT="-o ./" \
	OBJ=".obj" \
	DEF="-Hdef=os2/zip.def"

# Borland C++
borland:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="bcc -O" \
	CFLAGS="-w- -DOS2 -DDYN_ALLOC -DNO_ASM" \
	AS="ml -nologo -c -Zm -Cp" \
	ASFLAGS="" \
	LDFLAGS="-e" \
	LDFLAGS2="" \
	OUT="-o" \
	OBJ=".obj" \
	OBJA="" \
	DEF="-sDos2/zip.def"

# emx 0.9c, gcc, OMF format, statically linked C runtime and emx
gcc:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="gcc -Zomf -O -Wimplicit" \
	CFLAGS="-DOS2 -DASM_CRC" \
	AS="gcc -Zomf" \
	ASFLAGS="-Di386" \
	LDFLAGS="-o ./" \
	LDFLAGS2="-Zsys -Zstack 320 -s -Zsmall-conv" \
	OUT="-o" \
	OBJ=".obj" \
	CRC32="crc_gcc" \
	OBJA="matchgcc.obj" \
	DEF="os2/zip.def"

# emx 0.9c, gcc, OMF format, dynamically linked C runtime and emx
gccdyn:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="gcc -Zomf -O -Wimplicit" \
	CFLAGS="-DOS2 -DASM_CRC" \
	AS="gcc -Zomf" \
	ASFLAGS="-Di386" \
	LDFLAGS="-o ./" \
	LDFLAGS2="-Zcrtdll -Zstack 320 -s" \
	OUT="-o" \
	OBJ=".obj" \
	CRC32="crc_gcc" \
	OBJA="matchgcc.obj" \
	DEF="os2/zip.def"

# emx 0.9c, gcc, a.out format, with debug info for gdb
gccdebug:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="gcc -g -Wimplicit" \
	CFLAGS="-DOS2 -DASM_CRC" \
	AS="gcc" \
	ASFLAGS="-Di386" \
	LDFLAGS="-o ./" \
	LDFLAGS2="" \
	OUT="-o" \
	OBJ=".o" \
	CRC32="crc_gcc" \
	OBJA="matchgcc.o" \
	DEF="os2/zip.def"

# emx 0.9c, gcc, a.out format, for MS-DOS
gccdos:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="gcc -O -Wimplicit" \
	CFLAGS="-DDOS -DMSDOS -DASM_CRC -DNO_MKTIME" \
	AS="gcc" \
	ASFLAGS="-Di386" \
	LDFLAGS="-o ./" \
	LDFLAGS2="-s -Zsmall-conv" \
	OUT="-o" \
	OBJ=".o" \
	CRC32="crc_gcc" \
	OBJA="matchgcc.o" \
	OBJ2="msdos.o" \
	OBJU2="msdos_.o" \
	OSDEP_H="msdos/osdep.h" \
	ZIPUP_H="msdos/zipup.h"

# emx 0.9c, gcc, RSXNT 1.3, cross-compilation for Win32
gccwin32:
	$(MAKE) -f os2/makefile.os2 zips \
	CC="gcc -Zwin32 -O -m486 -Wall" \
	CFLAGS="-DWIN32 -DASM_CRC" \
	AS="gcc -Zwin32" \
	ASFLAGS="-Di386" \
	LDFLAGS="-o ./" \
	LDFLAGS2="-s -Zsmall-conv" \
	OUT="-o" \
	OBJ=".o" \
	CRC32="crc_gcc" \
	OBJA="matchgcc.o" \
	OBJ2="win32zip.o win32.o nt.o" \
	OBJU2="win32_.o" \
	OSDEP_H="win32/osdep.h" \
	ZIPUP_H="win32/zipup.h" \
	DEF="win32/zip.def"

# VPATH = .;os2

# variables

#default settings for target dependent macros:
DIRSEP = /
AS_DIRSEP = /
# LOCAL_OPTS =
CCFLAGS = $(CFLAGS) $(LOCAL_OPTS)

OSDEP_H = os2/osdep.h
ZIPUP_H = os2/os2zip.h os2/zipup.h
CRC32   = crc32


OBJZ =  zip$(OBJ) zipfile$(OBJ) zipup$(OBJ) fileio$(OBJ) util$(OBJ) \
        $(CRC32)$(OBJ) crctab$(OBJ) globals$(OBJ) \
	deflate$(OBJ) trees$(OBJ) bits$(OBJ) crypt$(OBJ) ttyio$(OBJ)
OBJ2 =	os2zip$(OBJ) os2$(OBJ) os2acl$(OBJ)

OBJU =  zipfile_$(OBJ) fileio_$(OBJ) util_$(OBJ) globals$(OBJ)
OBJU2 = os2zip_$(OBJ)

OBJN =  zipnote$(OBJ) $(OBJU) $(OBJU2)
OBJS =  zipsplit$(OBJ) $(OBJU) $(OBJU2)
OBJC =  zipcloak$(OBJ) crctab$(OBJ) crypt_$(OBJ) ttyio$(OBJ) $(OBJU) $(OBJU2)

ZIP_H = zip.h ziperr.h tailor.h $(OSDEP_H)

# rules

.SUFFIXES: .c $(OBJ)

.c$(OBJ):
	$(CC) -c -I. $(CCFLAGS) $<

.asm$(OBJ):
	$(AS) $(ASFLAGS) $< $(ASEOL)

# targets

zips:	zip.exe zipnote.exe zipsplit.exe zipcloak.exe

zip$(OBJ):	zip.c $(ZIP_H) revision.h crypt.h ttyio.h
zipfile$(OBJ):	zipfile.c $(ZIP_H)
zipup$(OBJ):	zipup.c $(ZIP_H) revision.h crypt.h $(ZIPUP_H)
fileio$(OBJ):	fileio.c $(ZIP_H)
util$(OBJ):	util.c $(ZIP_H)
globals$(OBJ):	globals.c $(ZIP_H)
deflate$(OBJ):	deflate.c $(ZIP_H)
trees$(OBJ):	trees.c $(ZIP_H)
bits$(OBJ):	bits.c $(ZIP_H) crypt.h
crc32$(OBJ):	crc32.c $(ZIP_H)
crctab$(OBJ):	crctab.c $(ZIP_H)
crypt$(OBJ):	crypt.c $(ZIP_H) crypt.h ttyio.h
ttyio$(OBJ):	ttyio.c $(ZIP_H) crypt.h ttyio.h

os2zip$(OBJ):	os2/os2zip.c $(ZIP_H) os2/os2zip.h os2/os2acl.h
	$(CC) -c -I. $(CCFLAGS) os2$(DIRSEP)os2zip.c

os2$(OBJ):	os2/os2.c $(ZIP_H) os2/os2zip.h
	$(CC) -c -I. $(CCFLAGS) os2$(DIRSEP)os2.c

os2acl$(OBJ):	os2/os2acl.c os2/os2acl.h
	$(CC) -c -I. $(CCFLAGS) os2$(DIRSEP)os2acl.c

msdos$(OBJ):	msdos/msdos.c $(ZIP_H)
	$(CC) -c -I. $(CCFLAGS) msdos$(DIRSEP)msdos.c

win32zip$(OBJ):	win32/win32zip.c $(ZIP_H) win32/win32zip.h win32/nt.h
	$(CC) -c -I. $(CCFLAGS) win32$(DIRSEP)win32zip.c

win32$(OBJ):	win32/win32.c $(ZIP_H) win32/win32zip.h
	$(CC) -c -I. $(CCFLAGS) win32$(DIRSEP)win32.c

nt$(OBJ):	win32/nt.c win32/nt.h
	$(CC) -c -I. $(CCFLAGS) win32$(DIRSEP)nt.c

crc_i86$(OBJ):	msdos/crc_i86.asm				# 16bit only
	$(AS) $(ASFLAGS) msdos$(AS_DIRSEP)crc_i86.asm $(ASEOL)

crc_i386$(OBJ):	win32/crc_i386.asm				# 32bit, MASM
	$(AS) $(ASFLAGS) win32$(AS_DIRSEP)crc_i386.asm $(ASEOL)

crc_gcc$(OBJ):	crc_i386.S					# 32bit, GNU AS
	$(AS) $(ASFLAGS) -x assembler-with-cpp -c -o $@ crc_i386.S

match$(OBJ):	msdos/match.asm
	$(AS) $(ASFLAGS) msdos$(AS_DIRSEP)match.asm $(ASEOL)

match32$(OBJ):	win32/match32.asm
	$(AS) $(ASFLAGS) win32$(AS_DIRSEP)match32.asm

matchgcc$(OBJ):	match.S
	$(AS) $(ASFLAGS) -x assembler-with-cpp -c -o $@ match.S

zipcloak$(OBJ):	zipcloak.c $(ZIP_H) revision.h crypt.h ttyio.h
zipnote$(OBJ):	zipnote.c $(ZIP_H) revision.h
zipsplit$(OBJ): zipsplit.c $(ZIP_H) revision.h

zipfile_$(OBJ):	zipfile.c $(ZIP_H)
	$(CC) -c -I. $(CCFLAGS) -DUTIL $(OUT)$@ zipfile.c

fileio_$(OBJ):	fileio.c $(ZIP_H)
	$(CC) -c -I. $(CCFLAGS) -DUTIL $(OUT)$@ fileio.c

util_$(OBJ):	util.c $(ZIP_H) os2/os2zip.h
	$(CC) -c -I. $(CCFLAGS) -DUTIL $(OUT)$@ util.c

crypt_$(OBJ):	crypt.c $(ZIP_H) crypt.h ttyio.h
	$(CC) -c -I. $(CCFLAGS) -DUTIL $(OUT)$@ crypt.c

os2zip_$(OBJ):	os2/os2zip.c $(ZIP_H) os2/os2zip.h
	$(CC) -c -I. $(CCFLAGS) -DUTIL $(OUT)$@ os2$(DIRSEP)os2zip.c

msdos_$(OBJ):	msdos/msdos.c $(ZIP_H)
	$(CC) -c -I. $(CCFLAGS) -DUTIL $(OUT)$@ msdos$(DIRSEP)msdos.c

win32_$(OBJ):	win32/win32.c $(ZIP_H) win32/win32zip.h
	$(CC) -c -I. $(CCFLAGS) -DUTIL $(OUT)$@ win32$(DIRSEP)win32.c

zip.exe: $(OBJZ) $(OBJ2) $(OBJA)
	$(CC) $(LDFLAGS)$@ $(DEF) $(OBJZ) $(OBJ2) $(OBJA) $(LDFLAGS2)

zipcloak.exe: $(OBJC)
	$(CC) $(LDFLAGS)$@ $(DEF) $(OBJC) $(LDFLAGS2)

zipnote.exe: $(OBJN)
	$(CC) $(LDFLAGS)$@ $(DEF) $(OBJN) $(LDFLAGS2)

zipsplit.exe: $(OBJS)
	$(CC) $(LDFLAGS)$@ $(DEF) $(OBJS) $(LDFLAGS2)