crc_i386.c

infozip2.2源码

/* crc_i386.c -- Microsoft 32-bit C/C++ adaptation of crc_i386.asm
 * Created by Rodney Brown from crc_i386.asm, modified by Chr. Spieler.
 * publis
 * Last revised 12 Oct 97
 *
 * Original coded (in crc_i386.asm) and put into the public domain
 * by Paul Kienitz and Christian Spieler.
 *
 * Revised 06-Oct-96, Scott Field ([e-mail])
 *   fixed to assemble with masm by not using .model directive which makes
 *   assumptions about segment alignment.  Also,
 *   avoid using loop, and j[e]cxz where possible.  Use mov + inc, rather
 *   than lodsb, and other misc. changes resulting in the following performance
 *   increases:
 *
 *      unrolled loops                NO_UNROLLED_LOOPS
 *      *8    >8      <8              *8      >8      <8
 *
 *      +54%  +42%    +35%            +82%    +52%    +25%
 *
 *   first item in each table is input buffer length, even multiple of 8
 *   second item in each table is input buffer length, > 8
 *   third item in each table is input buffer length, < 8
 *
 * Revised 02-Apr-97, Chr. Spieler, based on Rodney Brown ([e-mail])
 *   Incorporated Rodney Brown's 32-bit-reads optimization as found in the
 *   UNIX AS source crc_i386.S. This new code can be disabled by defining
 *   the macro symbol NO_32_BIT_LOADS.
 *
 * Revised 12-Oct-97, Chr. Spieler, based on Rodney Brown ([e-mail])
 *   Incorporated Rodney Brown's additional tweaks for 32-bit-optimized CPUs
 *   (like the Pentium Pro, Pentium II, and probably some Pentium clones).
 *   This optimization is controlled by the macro symbol __686 and is disabled
 *   by default. (This default is based on the assumption that most users
 *   do not yet work on a Pentium Pro or Pentium II machine ...)
 *
 * FLAT memory model assumed.
 *
 * The loop unrolling can be disabled by defining the macro NO_UNROLLED_LOOPS.
 * This results in shorter code at the expense of reduced performance.
 *
 */

#include "zip.h"

#ifndef USE_ZLIB

#ifndef ZCONST
#  define ZCONST const
#endif

#if (defined(_MSC_VER) && _MSC_VER >= 700)
#if (defined(_M_IX86) && _M_IX86 >= 300)
/* This code is intended for Microsoft C/C++ (32-bit compiler). */

/*
 * These two (three) macros make up the loop body of the CRC32 cruncher.
 * registers modified:
 *   eax  : crc value "c"
 *   esi  : pointer to next data byte (or dword) "buf++"
 * registers read:
 *   edi  : pointer to base of crc_table array
 * scratch registers:
 *   ebx  : index into crc_table array
 *          (requires upper three bytes = 0 when __686 is undefined)
 */
#ifndef __686
#define Do_CRC \
  __asm mov     bl, al \
  __asm shr     eax, 8 \
  __asm xor     eax, [edi+ebx*4]
#else /* __686 */
#ifdef NO_MOVZX_SUPPORT
#define movzx__ebx__al  __asm _emit 0x0F __asm _emit 0xB6 __asm _emit 0xD8
#else
#define movzx__ebx__al  __asm movzx   ebx, al
#endif
#define Do_CRC \
  movzx__ebx__al \
  __asm shr     eax, 8 \
  __asm xor     eax, [edi+ebx*4]
#endif /* ?__686 */

#define Do_CRC_byte \
  __asm xor     al, byte ptr [esi] \
  __asm inc     esi \
  Do_CRC

#ifndef NO_32_BIT_LOADS
#define Do_CRC_dword \
  __asm xor     eax, dword ptr [esi] \
  __asm add     esi, 4 \
  Do_CRC \
  Do_CRC \
  Do_CRC \
  Do_CRC
#endif /* !NO_32_BIT_LOADS */

/* ========================================================================= */
ulg crc32(crc, buf, len)
    ulg crc;                    /* crc shift register */
    ZCONST uch *buf;            /* pointer to bytes to pump through */
    extent len;                 /* number of bytes in buf[] */
/* Run a set of bytes through the crc shift register.  If buf is a NULL
   pointer, then initialize the crc shift register contents instead.
   Return the current crc in either case. */
{
    __asm {
                push    edx
                push    ecx

                mov     esi,buf              ; 2nd arg: uch *buf
                sub     eax,eax              ;> if (!buf)
                test    esi,esi              ;>   return 0;
                jz      fine                 ;> else {

                call    get_crc_table
                mov     edi,eax
                mov     eax,crc              ; 1st arg: ulg crc
#ifndef __686
                sub     ebx,ebx              ; ebx=0; make bl usable as a dword
#endif
                mov     ecx,len              ; 3rd arg: extent len
                not     eax                  ;>   c = ~crc;

#ifndef NO_UNROLLED_LOOPS
#  ifndef NO_32_BIT_LOADS
                test    ecx,ecx
                je      bail
align_loop:
                test    esi,3                ; align buf pointer on next
                jz      aligned_now          ;  dword boundary
                Do_CRC_byte
                dec     ecx
                jnz     align_loop
aligned_now:
#  endif /* !NO_32_BIT_LOADS */
                mov     edx,ecx              ; save len in edx
                and     edx,000000007H       ; edx = len % 8
                shr     ecx,3                ; ecx = len / 8
                jz      No_Eights
; align loop head at start of 486 internal cache line !!
                align   16
Next_Eight:
#  ifndef NO_32_BIT_LOADS
                Do_CRC_dword
                Do_CRC_dword
#  else /* NO_32_BIT_LOADS */
                Do_CRC_byte
                Do_CRC_byte
                Do_CRC_byte
                Do_CRC_byte
                Do_CRC_byte
                Do_CRC_byte
                Do_CRC_byte
                Do_CRC_byte
#  endif /* ?NO_32_BIT_LOADS */
                dec     ecx
                jnz     Next_Eight
No_Eights:
                mov     ecx,edx

#endif /* NO_UNROLLED_LOOPS */
#ifndef NO_JECXZ_SUPPORT
                jecxz   bail                 ;>   if (len)
#else
                test    ecx,ecx              ;>   if (len)
                jz      bail
#endif
; align loop head at start of 486 internal cache line !!
                align   16
loupe:                                       ;>     do {
                Do_CRC_byte                  ;        c = CRC32(c, *buf++);
                dec     ecx                  ;>     } while (--len);
                jnz     loupe

bail:                                        ;> }
                not     eax                  ;> return ~c;
fine:
                pop     ecx
                pop     edx
    }
}
#endif /* _M_IX86 >= 300 */
#endif /* _MSC_VER >= 700*/
#endif /* !USE_ZLIB */