zmodem.h

一个通讯程序源码

/*+-------------------------------------------------------------------------
	zmodem.h -- common include filefor ecurz/ecusz
--------------------------------------------------------------------------*/
/*+:EDITS:*/
/*:09-10-1992-14:00-wht@n4hgf-ECU release 3.20 */
/*:08-22-1992-15:39-wht@n4hgf-ECU release 3.20 BETA */
/*:08-28-1991-14:08-wht@n4hgf2-SVR4 cleanup by aega84!lh */
/*:08-21-1991-06:23-wht@n4hgf-sun porting */
/*:07-25-1991-12:59-wht@n4hgf-ECU release 3.10 */
/*:08-14-1990-20:41-wht@n4hgf-ecu3.00-flush old edit history */

#ifdef __STDC__
#define VOLATILE volatile
#else
#define VOLATILE
#endif

#include "../ecu_types.h"
#include "../ecu_stat.h"
#if defined(sun)
#include <termio.h>
#define termio termios
#undef TCGETA
#undef TCSETA
#undef TCSETAW
#define TCGETA	TCGETS
#define TCSETA	TCSETS
#define TCSETAW	TCSETSW
#undef ECHO
#undef NL0
#undef NL1
#undef TAB0
#undef TAB1
#undef TAB2
#undef XTABS
#undef CR0
#undef CR1
#undef CR2
#undef CR3
#undef FF0
#undef FF1
#undef BS0
#undef BS1
#undef TOSTOP
#undef FLUSHO
#undef PENDIN
#undef NOFLSH
#else
#include <termio.h>
#endif /* sun */
#include <sys/ioctl.h>
#include <string.h>
#define MODE2OK

#if defined(M_UNIX)
#undef M_XENIX
#endif

#if !defined(READCHECK)
#if defined(FIONREAD)
#define READCHECK
#endif
#if defined(SYSV)
#define READCHECK
#endif
#endif

#define ACK 6
#define CAN ('X'&037)
#define CPMEOF 032
#define ENQ 005
#define EOT 4
#define ERROR (-1)
#define ERRORMAX 5
#define FALSE 0
#define NAK 025
#define OK 0
#define PATHLEN 257	/* ready for 4.2 bsd ? */
#define RCDO (-3)
#define SOH 1
#define STX 2
#define TIMEOUT (-2)
#define TRUE 1
#define UNIXFILE 0xF000	/* The S_IFMT file mask bit for stat */
#define WANTCRC 0103	/* send C not NAK to get crc not checksum */

#define WANTG 0107	/* Send G not NAK to get nonstop batch xmsn */
#define WCEOT (-10)
#define XOFF ('s'&037)
#define XON ('q'&037)

/*
 * updcrc macro derived from article Copyright (C) 1986 Stephen Satchell. 
 *  NOTE: First argument must be in range 0 to 255.
 *        Second argument is referenced twice.
 * 
 * Programmers may incorporate any or all code into their programs, 
 * giving proper credit within the source. Publication of the 
 * source routines is permitted so long as proper credit is given 
 * to Stephen Satchell, Satchell Evaluations and Chuck Forsberg, 
 * Omen Technology.
 */

#define updcrc(cp, crc) ( crctab[(((unsigned)crc >> 8) & 255)] ^ (crc << 8) ^ (cp))
#define UPDC32(b, c) (cr3tab[((int)c ^ b) & 0xff] ^ ((c >> 8) & 0x00FFFFFF))


#define ZPAD '*'	/* 052 Padding character begins frames */
#define ZDLE 030	/* Ctrl-X Zmodem escape - `ala BISYNC DLE */
#define ZDLEE (ZDLE^0100)	/* Escaped ZDLE as transmitted */
#define ZBIN 'A'	/* Binary frame indicator */
#define ZHEX 'B'	/* HEX frame indicator */
#define ZBIN32 'C'	/* Binary frame with 32 bit FCS */

/* Frame types (see array "frametypes" in zm.c) */
#define ZRQINIT	0	/* Request receive init */
#define ZRINIT	1	/* Receive init */
#define ZSINIT 2	/* Send init sequence (optional) */
#define ZACK 3		/* ACK to above */
#define ZFILE 4		/* File name from sender */
#define ZSKIP 5		/* To sender: skip this file */
#define ZNAK 6		/* Last packet was garbled */
#define ZABORT 7	/* Abort batch transfers */
#define ZFIN 8		/* Finish session */
#define ZRPOS 9		/* Resume data trans at this position */
#define ZDATA 10	/* Data packet(s) follow */
#define ZEOF 11		/* End of file */
#define ZFERR 12	/* Fatal Read or Write error Detected */
#define ZCRC 13		/* Request for file CRC and response */
#define ZCHALLENGE 14	/* Receiver's Challenge */
#define ZCOMPL 15	/* Request is complete */
#define ZCAN 16		/* Other end canned session with CAN*5 */
#define ZFREECNT 17	/* Request for free bytes on filesystem */
#define ZCOMMAND 18	/* Command from sending program */
#define ZSTDERR 19	/* Output to standard error, data follows */

/* ZDLE sequences */
#define ZCRCE 'h'	/* CRC next, frame ends, header packet follows */
#define ZCRCG 'i'	/* CRC next, frame continues nonstop */
#define ZCRCQ 'j'	/* CRC next, frame continues, ZACK expected */
#define ZCRCW 'k'	/* CRC next, ZACK expected, end of frame */
#define ZRUB0 'l'	/* Translate to rubout 0177 */
#define ZRUB1 'm'	/* Translate to rubout 0377 */

/* zdlread return values (internal) */
/* -1 is general error, -2 is timeout */
#define GOTOR 0400
#define GOTCRCE (ZCRCE|GOTOR)	/* ZDLE-ZCRCE received */
#define GOTCRCG (ZCRCG|GOTOR)	/* ZDLE-ZCRCG received */
#define GOTCRCQ (ZCRCQ|GOTOR)	/* ZDLE-ZCRCQ received */
#define GOTCRCW (ZCRCW|GOTOR)	/* ZDLE-ZCRCW received */
#define GOTCAN	(GOTOR|030)	/* CAN*5 seen */

/* Byte positions within header array */
#define ZF0	3	/* First flags byte */
#define ZF1	2
#define ZF2	1
#define ZF3	0
#define ZP0	0	/* Low order 8 bits of position */
#define ZP1	1
#define ZP2	2
#define ZP3	3	/* High order 8 bits of file position */

/* Bit Masks for ZRINIT flags byte ZF0 */
#define CANFDX	01	/* Rx can send and receive true FDX */
#define CANOVIO	02	/* Rx can receive data during disk I/O */
#define CANBRK	04	/* Rx can send a break signal */
#define CANCRY	010	/* Receiver can decrypt */
#define CANLZW	020	/* Receiver can uncompress */
#define CANFC32	040	/* Receiver can use 32 bit Frame Check */
#define ESCCTL 0100	/* Receiver expects ctl chars to be escaped */
#define ESC8   0200	/* Receiver expects 8th bit to be escaped */

/* Parameters for ZSINIT frame */
#define ZATTNLEN 32	/* Max length of attention string */
/* Bit Masks for ZSINIT flags byte ZF0 */
#define TESCCTL 0100	/* Transmitter expects ctl chars to be escaped */
#define TESC8   0200	/* Transmitter expects 8th bit to be escaped */

/* Parameters for ZFILE frame */
/* Conversion options one of these in ZF0 */
#define ZCBIN	1	/* Binary transfer - inhibit conversion */
#define ZCNL	2	/* Convert NL to local end of line convention */
#define ZCRESUM	3	/* Resume interrupted file transfer */
/* Management include options, one of these ored in ZF1 */
#define ZMSKNOLOC	0200	/* Skip file if not present at rx */
/* Management options, one of these ored in ZF1 */
#define ZMMASK	037	/* Mask for the choices below */
#define ZMNEWL	1	/* Transfer if source newer or longer */
#define ZMCRC	2	/* Transfer if different file CRC or length */
#define ZMAPND	3	/* Append contents to existing file (if any) */
#define ZMCLOB	4	/* Replace existing file */
#define ZMNEW	5	/* Transfer if source newer */
	/* Number 5 is alive ... */
#define ZMDIFF	6	/* Transfer if dates or lengths different */
#define ZMPROT	7	/* Protect destination file */
/* Transport options, one of these in ZF2 */
#define ZTLZW	1	/* Lempel-Ziv compression */
#define ZTCRYPT	2	/* Encryption */
#define ZTRLE	3	/* Run Length encoding */
/* Extended options for ZF3, bit encoded */
#define ZXSPARS	64	/* Encoding for sparse file operations */

/* Parameters for ZCOMMAND frame ZF0 (otherwise 0) */
#define ZCACK1	1	/* Acknowledge, then do command */

/* FTOFFSET is offset for frametypes array in ecuzm.c */
#define FTOFFSET 3

long rclhdr();

#ifdef USE_PROTOS
# include "protos.h"
#endif

/* vi: set tabstop=4 shiftwidth=4: */