虫虫首页|资源下载|资源专辑|精品软件
登录|注册

Measuring

测量是按照某种规律,用数据来描述观察到的现象,即对事物作出量化描述。测量是对非量化实物的量化过程。
  • This is matlab sourcecode for Measuring gaussian

    This is matlab sourcecode for Measuring gaussian

    标签: sourcecode Measuring gaussian matlab

    上传时间: 2013-11-30

    上传用户:skhlm

  • an taximeter for Measuring

    an taximeter for Measuring

    标签: taximeter Measuring for an

    上传时间: 2014-01-18

    上传用户:zhangzhenyu

  • Voltmeter Measuring from 0- 5Vdc

    Voltmeter Measuring from 0- 5Vdc

    标签: Voltmeter Measuring 5Vdc from

    上传时间: 2014-06-27

    上传用户:sy_jiadeyi

  • 可程式盘面型位数电表

    精确度0.05%满刻度±1位数(Accuracy 0.05%F.S.±1digit) 可测量交直流电流/交直流电压/电位计/传送器/Pt-100/荷重元/电阻等信号(Measuring DCA/DCV/ACA/ACV/Potentiometer/Transmitter/Pt-100/Load Cell/Resistor/etc……) 显示范围0-19999可任意规划(Programmable rate 0 to 1999 digit) 小数点可任意规划(Decimal point can be modified) 尺寸小,稳定性高(Dimension small & High stability)

    标签: 程式 数电

    上传时间: 2014-01-25

    上传用户:RQB123

  • 电池管理系统的多点温度测量方案

      Abstract: It is critically important that lithium-ion battery stacks have a good battery-management system for monitoring many cellvoltages and cell temperatures. Without that monitoring, thermal runaway can lead to a battery explosion. This design idea presentsa low-power circuit that measures the temperature of up to 12 thermistors. It powers and configures the multiplexers, and also putsthe muxes into shutdown to save power when not Measuring temperatures.

    标签: 电池管理系统 多点 温度测量 方案

    上传时间: 2013-10-29

    上传用户:xwd2010

  • DN452 汽车应用的电源监视器

      The LTC®4151 is a high side power monitor that includesa 12-bit ADC for Measuring current and voltage, as wellas the voltage on an auxiliary input. Data is read throughthe widely used I2C interface. An unusual feature in thisdevice is its 7V to 80V operating range, allowing it to coverapplications from 12V automotive to 48V telecom.

    标签: 452 DN 汽车应用 电源监视器

    上传时间: 2013-10-28

    上传用户:集美慧

  • 基于89C52的二极管特性测试器的设计

      利用单片机具有的智能程序控制的特点,设计了基于STC89C52单片机的"二极管特性测试器",可对二极管一般特性进行快速测试。通过稳定线性电流源给二极管加载恒定电流,然后由高精度模数转换器测试其压降,以此为基础可判断二极管好坏、检测二极管极性和测试二极管伏安特性等,避免了用万用表测试只能测得极性而不知其特性这一缺点。可用于电子设计制作过程中对二极管进行快速测试,以确定被测二极管是否满足电路的设计要求。   Abstract:   By making good use of the intelligent control function of the Micro Controller Unit (MCU), the diode trait tester was designed based on the STC89C52,which could be used to test the trait of a diode rapidly. By loading constant current to diode through the stable linear current source, and Measuring the voltage drop of the diode by high-precision analogue-to-digital converter (ADC), it can judge whether the diode is good or not, distinguish the polarity of the diode, and test the trait that the diode, which can avoid the fault of using a multimeter can only measure the polarity but not the trait. This device can be used to test the trait of a diode quickly,and to make sure that whether a diode can be used in the electronic design or not.

    标签: 89C52 二极管 特性测试器

    上传时间: 2013-11-12

    上传用户:assef

  • 基于PIC16C71的数字水温配制阀的设计

      设计了一种基于PIC16C71单片机的数字水温配制阀。该配制阀采用NTC热敏电阻作温度传感器,与固定电阻组成简单分压电路作为水温测量电路,利用PIC16C71单片机内置的8位A/D转换器把热敏电阻上的模拟电压转换为数字量,PIC16C71单片机控制直流电机驱动混水阀调节冷热水的混合比例实现水温调节。给出了控制电路图,对水温测量电路的参数选择和测温精度作了详细讨论。实验和分析表明,选用阻值较大的NTC热敏电阻和分压电阻可较好地解决热敏电阻因功耗较大造成的热击穿问题。   Abstract:   A digital valve for controlling water temperature based on PIC16C71 was presented in this paper.A bleeder circuit which consisted of a NTC thermistor as temperature sensor and a fixed resistance was designed as water temperature Measuring circuit.The analog voltage on the thermistor was converted into digital signal by a 8-bit A/D converter embedded in PIC16C71. Based on the digital signal, the MCU PIC16C71 drived the valve by a DC motor to adjust the water temperature through adjusting the proportion of hot water and cold water.The circuit diagram of controller was given,the principle,the component parameters and the accuracy of Measuring temperatures were also dissertated in detail. It was found by experiment and analysis that thermal breakdown of thermistor caused by high power could be solved by selecting thermistor and fixed resistance with high impedance value.

    标签: PIC 16C C71 16

    上传时间: 2013-11-07

    上传用户:Yue Zhong

  • 基于PIC16LF874单片机的电容测量模块

    为提高电容测量精度,针对电容式传感器的工作原理设计了基于PIC16LF874单片机电容测量模块。简单阐述了电容测量电路的应用背景和国内外研究现状,介绍了美国Microchip公司PIC16LF874单片机的特性。电容式传感器输出的动态微弱电容信号通过PS021型电容数字转换器把模拟量数据转换成数字量数据,所测数据由PIC16LF874单片机应用程序进行处理、显示和保存。实验结果表明,固定电容标称值为10~20 pF 的测量值相对误差在1%以内,同时也可知被测电容容值越大,测量值和标称值相对误差越小。 Abstract:  To improve the accuracy of capacitance measurement,aimed at the principle of work of mercury capacitance acceleration transducer,the design of micro capacitance measurement circuit is based on the key PIC16LF874 chip. Briefly discusses the application of the capacitance Measuring circuit for the background and status of foreign researchers,focusing on the United States PIC16LF874 microcontroller features. Capacitive sensor outputed signal through the dynamics of weak PS021-chip capacitors (capacitancedigital converter) to convert analog data into digital data,the measured data from the PIC16LF874 microcontroller application process, display and preservation. Experimental results show that the fixed capacitor 10pF ~ 20pF nominal value of the measured value of relative error is within 1%,but also it canbe seen the value of the measured capacitance larger,Measuring value and the nominal value of relative error smaller.

    标签: PIC 874 16 LF

    上传时间: 2013-10-29

    上传用户:wojiaohs

  • 基于ARM单片机的自动测高测距小车

    生活中许多目标的高度和水平距离需要进行测量。目前主要的测量方法,仍以传统的皮尺丈量为主,测量效率不高,有时还很不方便,没有技术成熟的数字式测高测距产品。以基本的数学方法为理论依据,利用遥控小车做为载体,采用角度传感器测量角度、霍尔传感器测量水平距离等,通过单片机LM3S615进行数据计算,实现了对待测目标物体的高度、水平距离等数据的快速、精确和数字式的测量,高度测量精度可达99.06%,水平测量精度则可达98.06%。 Abstract:  In our lives, the height and horizontal distance of some goals are needed to be measured. Because the currently used methods are still traditional tape-based Measuring methods, and the Measuring efficiency is low and inconvenient so some kinds of digital and portable Measuring methods or instruments are needed. Based on the basic math theory, this paper designed and manufactured a portable, digital and remote controlled Measuring mobile small vehicle, which assembled with angle Measuring sensor for angle measurement and Hall sensor for horizontal distance Measuring. MCU LM3S615 calculated the height and horizontal distance data gotten from these sensors. The Measuring process is simple, the Measuring results are more accurate and the Measuring efficiency is higher than traditional measure instruments. The accuracy of height and distance measurement can reach 99.06% and 98.06%.

    标签: ARM 单片机 自动

    上传时间: 2013-10-30

    上传用户:jackandlee