START
共 404 篇文章
START 相关的电子技术资料，包括技术文档、应用笔记、电路设计、代码示例等，共 404 篇文章，持续更新中。
Altera的CycloneIII Start Board,使用的PFGA是3C25
Altera的CycloneIII Start Board,使用的PFGA是3C25，包括原理图和PCB，用Cadence Allegro打开
升级前需要安装DL串口驱动：PL-2303 Driver Installer.exe（假如以前已经安装过驱动
升级前需要安装DL串口驱动：PL-2303 Driver Installer.exe（假如以前已经安装过驱动，可以跳过此项）
插入DL数据线，确定可以连接上电脑！（请注意DL线电源线不要短路，手机没有电时升级请外接4.2V的外置电源）
请确定手机在电量足够的情况下升级。
1，解压common.rar文件，打文件夹中的Multi
此平台支持所有MTK系列手机
此平台支持所有MTK系列手机，
解锁；
解决手机由于MP3字库存储过大造成开机出现画面后马上就自动关机的软件问题；
直接格式化手机的MP3字库的工具
运行软件，选择正确的端口后，
手机带电池，接上数据线，
点START，然后，按住开机键直到出现进度后在松手即可正常对手机做格式化。
source with cpld prepared after the start of more documents, please use patience. Thank you, the gen
source with cpld prepared after the start of more documents, please use patience. Thank you, the generous support!
Programmable Logic Design Quick Start Handbook 一本为初学者而写的书 菜鸟们可以当参考资料
Programmable Logic Design Quick Start Handbook
一本为初学者而写的书
菜鸟们可以当参考资料
ADC0809采样控制电路的实现ADC0809是CMOS的8位A/D转换器
ADC0809采样控制电路的实现ADC0809是CMOS的8位A/D转换器，片内有8路模拟开关，可控制8个模拟量中的一个进入转换器中，转换时间约100us。主要控制信号有，START是转换启动信号，高电平有效。ALE是3位通道选择地址（ADDC、ADDB、ADDA）信号的所存信号。当模拟量送至某一输入端（如IN1或IN2），由3位地址信号选择，而地址信号由ALE锁存。
测试LPC2103的串口功能 打印出： program start here: new line new line
测试LPC2103的串口功能
打印出：
program start here:
new line
new line
Where We ve Been Where We re Going Back in February (that s 1998, but it almost seems longer), Dr.
Where We ve Been Where We re Going
Back in February (that s 1998, but it almost seems longer), Dr. GUI set off to start a set of columns on the Active Template Library (ATL).
SDK0308PB003MAN Enabler III-G SDK Quick Start,开发Enfora通讯模块的快速指南。
SDK0308PB003MAN Enabler III-G SDK Quick Start,开发Enfora通讯模块的快速指南。
SDK0308PB003MAN Enabler III-G SDK Quick Start,开发Enfora通讯模块的快速指南。
SDK0308PB003MAN Enabler III-G SDK Quick Start,开发Enfora通讯模块的快速指南。
This a GUI based system. The GUI is invoked from the command line by typing "ui_start". The GUI is s
This a GUI based system. The GUI is invoked from the command line by typing "ui_start". The GUI is self explanatory.
Tool tips are given in blue color. The cursor needs to be positioned on these for
The download includes the kernel source code, and a demo application for EVERY RTOS port. See http:
The download includes the kernel source code, and a demo application for EVERY
RTOS port. See http://www.freertos.org/a00017.html for full details of the
directory structure and information on loca
For build this project you can use ant (www.apache.org). Before build project rename file build.pro
For build this project you can use ant (www.apache.org). Before build project rename
file build.properties.pattern in build.properties and set specific for your machine
parameters, then start build.
The LPC2468 OEM quick start board user guide provide information for starting ARM LPC2468 quick deve
The LPC2468 OEM quick start board user guide provide information for starting ARM LPC2468 quick development.It contains 128M Nand flash, 4 M Nor flash and 32M RAM, VGA LCD and TOUCH SCREEN. Includes c
采用Intel8255端口数据线与上图除IN0~IN7之外的引线连接。 程序步骤： (1)根据模拟信号输入连线方式(跳线JP10与电位器１相连
采用Intel8255端口数据线与上图除IN0~IN7之外的引线连接。
程序步骤：
(1)根据模拟信号输入连线方式(跳线JP10与电位器１相连，若JP10上跳线摘掉，可将电位器２作模拟信号输入)，选择模拟通路，即选定addC,addB,accA组成三位二进制数据；
(2)同时使START和ALE有效，使ADC0809选择相应模拟信号并转换；
(3)等待EOC出现高电平；
(4)使OE为高
2N5550，2N5551
<p>
2N5550,2N5551 amplifier transistors NPN silicon.
</p>
<p>
This document <span style="display:none;" id="__kindeditor_bookmark_start_5__"></span>describes <span style="display:none;" id="__kinded
embedded systems firmware demystified a hard start Although the primary focud of the book is firmw
embedded systems firmware demystified
a hard start Although the primary focud of the book is firmware
Of the password is: Server: "1." Client: + for the month of the date of the machine. Such as
Of the password is:
Server: "1."
Client: + for the month of the date of the machine. Such as "2005/08/05", compared with the number "85"
Database: "xzxq".
I made the changes:
1,
Deployment of Server 1.install Tomcat(superior than j2sdk1.4.2 and Tomcat 5.0),and setup the env
Deployment of Server
1.install Tomcat(superior than j2sdk1.4.2 and Tomcat 5.0),and setup the envionment variables of JAVA_HOME
2.decompress file assignment2.war, and copy the directory to the
The simulator GUI is started with command ui_start in Matlab command window. WLAN simulation star
The simulator GUI is started with command ui_start in Matlab command window.
WLAN simulation starts by clicking the Start Simulation button in the GUI window.
WLAN simulation can be terminated,