虫虫首页|资源下载|资源专辑|精品软件
登录|注册

post-linker

  • 西门子公司的DP/PA linker的gsd文件

    西门子公司的DP/PA linker的gsd文件,通过对该gsd研究,可以对linker的工作原理有一定认识

    标签: linker gsd DP PA

    上传时间: 2013-12-17

    上传用户:邶刖

  • 基于ARM的嵌入式Web服务器的研究与实现

    近年来,随着嵌入式系统的快速发展,越来越多的嵌入式设备被用于工业控制、智能家居等领域。同时伴随着网络技术的发展,嵌入式设备通过网络接入局域网或者Internet已经逐步成为发展的趋势。通过在嵌入式设备中内置Web服务器,用户可以在任何一台联网的计算机上通过浏览器来获取设备的信息,用户还可以通过网络对设备进行配置和管理。因此研究和开发嵌入式Web服务器具有重要的实际意义和应用价值。 本文在S3C44BOX开发板上使用μClinux操作系统作为开发平台,开发并实现了嵌入式Web服务器。文中提出了2种实现方案,一种是基于boa的嵌入式Web服务器,所做的主要工作是boa在gClinux中的移植和CGI的编写,在此基础上实现了动、静态页面的生成和简单的控制功能。另一种方案是基于HTTP协议和socket编程所开发的嵌入式Web服务器,在此方案中实现了HTTP协议的GET和POST请求方式,能够生成简单的动态页面,实现了历史数据的保存功能,还能够根据用户在浏览器端的请求进行相应的控制和管理。 论文首先对嵌入式Web服务器的体系结构进行了分析,然后介绍了S3C44BOX硬件开发平台,并分析了bootloader的基本原理和实现过程。随后对μClinux操作系统的特点和网卡驱动程序进行了分析,并着重介绍了μClinux的移植过程。在第五章,论文详细分析了TCP/IP和HTTP的原理和工作机制,并介绍了Web服务器中CGI的工作原理,最后分析了boa服务器的移植和CGI程序的编写以及Web服务器的测试等。在第六章,在HTTP协议分析和网络编程的基础上,提出了嵌入式Web服务器的设计思想、程序流程图,重点分析了Web服务器主程序流程、动态页面的生成、历史数据查询的实现等,也分析了Web服务器中各种控制功能的实现流程,最后给出了Web服务器的测试结果。

    标签: ARM Web 嵌入式 服务器

    上传时间: 2013-05-17

    上传用户:ice_qi

  • 数字电源学习资料

    Permission to make digital or hard copies of all or part of this work forpersonal or classroom use is granted without fee provided that copies arenot made or distributed for profit or commercial advantage and that copiesbear this notice and the full citation on the first page. To copy otherwise, torepublish, to post on servers or to redistribute to lists, requires prior specificpermission.

    标签: 数字电源

    上传时间: 2013-10-16

    上传用户:dddddd

  • FET430PIF自制资料

    The MSP-FET430PIF is a Parallel Port interface (does not include target board) that is used to program and debug MSP430 FET tools and test boards through the JTAG interface. This interface is included in our FET tools, but sold without the development board. This interface uses a Parallel PC Port to communicate to the Debugger Software (IAR Kickstart software included) running on the PC. The interface uses the standard 14 pin header to communicate to the MSP430 device using the standard JTAG protocol. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP430 flash is extremely low power, no external power supply is required. The tool has an integrated software environment and connects directly to the PC which greatly simplifies the set-up and use of the tool. The flash development tool supports development with all MSP430 flash parts. Features MSP430 debugging interface to connect a MSP430-Flash-device to a Parallel port on a PC Supports JTAG debug protocol (NO support for Spy-Bi-Wire (2-wire JTAG) debug protocol, Spy-Bi-Wire (2-wire JTAG) is supported by MSP-FET430UIF) Parallel Port cable and a 14-conductor target cable Full documentation on CD ROM Integrated IAR Kickstart user interface which includes: Assembler Linker Limulator Source-level debugger Limited C-compiler Technical specifications: Backwardly compatable with existing FET tool boards.

    标签: FET 430 PIF

    上传时间: 2013-10-26

    上传用户:fengweihao158@163.com

  • 怎样写testbench-xilinx

    怎样写testbench-xilinx  在ISE 环境中, 当前资源操作窗显示了资源管理窗口中选中的资源文件能进行的相关操作。在资源管理窗口选中了 testbench 文件后,在当前资源操作窗显示的 ModelSim Simulator 中显示了4种能进行的模拟操作,分别是:Simulator Behavioral Model(功能仿真)、Simulator Post-translate VHDL Model(翻译后仿真)、Simulator Post-Map VHDL Model(映射后仿真)、Simulator Post-Place & Route VHDL Model(布局布线后仿真) 。如

    标签: testbench-xilinx

    上传时间: 2013-11-14

    上传用户:467368609

  • Virtex-6 FPGA PCB设计手册

    Xilinx is disclosing this user guide, manual, release note, and/or specification (the "Documentation") to you solely for use in the developmentof designs to operate with Xilinx hardware devices. You may not reproduce, distribute, republish, download, display, post, or transmit theDocumentation in any form or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise,without the prior written consent of Xilinx. Xilinx expressly disclaims any liability arising out of your use of the Documentation. Xilinx reservesthe right, at its sole discretion, to change the Documentation without notice at any time. Xilinx assumes no obligation to correct any errorscontained in the Documentation, or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection withtechnical support or assistance that may be provided to you in connection with the Information.

    标签: Virtex FPGA PCB 设计手册

    上传时间: 2014-01-12

    上传用户:竺羽翎2222

  • CPLD库指南

    Xilinx is disclosing this user guide, manual, release note, and/or specification (the “Documentation”) to you solely for use in the development of designs to operate with Xilinx hardware devices. You may not reproduce, distribute, republish, download, display, post, or transmit the Documentation in any form or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Xilinx. Xilinx expressly disclaims any liability arising out of your use of the Documentation. Xilinx reserves the right, at its sole discretion, to change the Documentation without notice at any time. Xilinx assumes no obligation to correct any errors contained in the Documentation, or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection with technical support or assistance that may be provided to you in connection with the Information.  

    标签: CPLD

    上传时间: 2013-10-22

    上传用户:李哈哈哈

  • Virtex-6 FPGA PCB设计手册

    Xilinx is disclosing this user guide, manual, release note, and/or specification (the "Documentation") to you solely for use in the developmentof designs to operate with Xilinx hardware devices. You may not reproduce, distribute, republish, download, display, post, or transmit theDocumentation in any form or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise,without the prior written consent of Xilinx. Xilinx expressly disclaims any liability arising out of your use of the Documentation. Xilinx reservesthe right, at its sole discretion, to change the Documentation without notice at any time. Xilinx assumes no obligation to correct any errorscontained in the Documentation, or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection withtechnical support or assistance that may be provided to you in connection with the Information.

    标签: Virtex FPGA PCB 设计手册

    上传时间: 2013-11-11

    上传用户:zwei41

  • CPLD库指南

    Xilinx is disclosing this user guide, manual, release note, and/or specification (the “Documentation”) to you solely for use in the development of designs to operate with Xilinx hardware devices. You may not reproduce, distribute, republish, download, display, post, or transmit the Documentation in any form or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Xilinx. Xilinx expressly disclaims any liability arising out of your use of the Documentation. Xilinx reserves the right, at its sole discretion, to change the Documentation without notice at any time. Xilinx assumes no obligation to correct any errors contained in the Documentation, or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection with technical support or assistance that may be provided to you in connection with the Information.  

    标签: CPLD

    上传时间: 2014-12-04

    上传用户:qazxsw

  • Firepass - 一种隧道技术工具

    Firepass - 一种隧道技术工具,通过它可以避开防火墙的规则约束,将数据流封装在合法的HTTP POST请求中。任何基于TCP/UDP协议的子协议可以通过它来穿越HTTP代理服务器对HTTP协议的严格审查。到目前为止,客户端和服务器端仅用PERL语言编写。服务器端作为一个CGI脚本运行在WEB服务器上。Firepass的主要特点是用户可以在外网使用几种方法安装服务器端脚本。用户无需在外网计算机上帮定任何端口。当服务端脚本被置于企业WEB服务器上,客户端脚本从外部网络和它通信时,Firepass也可适用于反弹作业。

    标签: Firepass 隧道

    上传时间: 2013-12-25

    上传用户:D&L37