This paper analyzes the vector control theory of asynchronous motors based on the magnetic orientation of motor rotors, and its mathematical model is made. Then the variable frequency vector speed-adjusting experimental system is built with the DSP TMS320F2812 which works as the core control chip and intelligent power module.
标签： asynchronous orientati the analyzes
上传时间： 2013-12-08
上传用户：shinesyh
Space-Vector PWM Technique for Two-Phase Inverter-Fed Two-Phase Induction motors
标签： Two-Phase Space-Vector Inverter-Fed Induction
上传时间： 2013-12-18
上传用户：时代电子小智
超声波电机(Ultrasonic motors，简称USM)是一种全新原理的直接驱动电机，它利用压电陶瓷逆压电效应激发的超声振动作为驱动力，通过定转子间的摩擦力来驱动转子运动。与传统的电磁电机相比，它具有低速大转矩、无电磁干扰、动作响应快、运行无噪声、无输入自锁等卓越特性，在非连续运动领域、精密控制领域比传统的电磁电机性能优越得多。超声波电机在工业控制系统、汽车专用电器、精密仪器仪表、办公自动化设备、智能机器人等领域有广阔的应用前景，近年来倍受科技界和工业界的重视，成为当前机电控制领域的一个研究热点。 本文主要以行波型超声波电机的驱动控制技术为研究对象，引入嵌入式系统理念，设计并制作了超声波电机的驱动控制系统，并对超声波电机的速度与定位控制做了深入的研究。本文主要研究内容及成果如下： 介绍了超声波电机的工作原理、特点及其应用前景，总结了国内外超声波电机驱动控制技术的发展历史和研究现状，以及今后我国超声波电机驱动控制技术的发展方向，明确了本文的研究内容。 结合嵌入式系统特点及其开发方法，详细介绍了超声波电机嵌入式驱动控制系统的硬件和软件设计过程，并总结了硬件、软件的调试过程。最后，对所设计系统性能进行了实验测试和数据分析。 采用DDS技术解决超声波电机所需要的高频驱动电源和数字控制的问题。本文设计的以ARM控制器为核心，频率、相位、幅值均可调的双通道信号发生器，具有频率和相位差控制精度高的特点。 本文介绍了速度与位置的常用控制策略。设计并搭建了基于增量式PID的速度和基于模糊PID的位置控制系统。速度控制采用增量式PID调节，其控制策略简单、易行，通过实验选择合适的参数能适应一般的控制精度要求。定位控制则采用模糊PID控制策略，该策略将模糊控制不需要精确的数学模型、收敛速度快的特点与PID简单易行、能消除稳态误差的优点相结合，改善了模糊控制器稳态性能，使电机定位控制精度达到0.0880。
上传时间： 2013-07-16
上传用户：wdq1111
General Description The LM621 is a bipolar IC designed for commutation of brushless DC motors. The part is compatible with both three- and four-phase motors. It can directly drive the power switching devices used to drive the motor. The LM621 provides an adjustable dead-time circuit to eliminate ``shootthrough'' current spiking in the power switching circuitry. Operation is from a 5V supply, but output swings of up to 40V are accommodated. The part is packaged in an 18-pin, dual-in-line package.
上传时间： 2013-07-24
上传用户：sdq_123
Piezoelectric motors are used in digital cameras for autofocus,zooming and optical image stabilization. Theyare relatively small, lightweight and effi cient, but theyalso require a complicated driving scheme. Traditionally,this challenge has been met with the use ofseparatecircuits, including a step-up converter and an oversizedgeneric full-bridge drive IC. The resulting high componentcount and large board space are especially problematicin the design of cameras for ever shrinking cell phones.The LT®3572 solves these problems by combining astep-up regulator and a dual full-bridge driver in a 4mm× 4mm QFN package. Figure 1 shows a typical LT3572Piezo motor drive circuit. A step-up converter is usedto generate 30V from a low voltage power source suchas a Li-Ion battery or any input power source within thepart’s wide input voltage range of 2.7V to 10V. The highoutput voltage of the step-up converter, adjustable upto 40V, is available for the drivers at the VOUT pin. Thedrivers operate in a full-bridge fashion, where the OUTAand OUTB pins are the same polarity as the PWMA andPWMB pins, respectively, and the OUTA and OUTB pinsare inverted from PWMA and PWMB, respectively. Thestep-up converter and both Piezo drivers have their ownshutdown control. Figure 2 shows a typical layout
上传时间： 2013-11-18
上传用户：hulee
A frequent requirement in systems involves drivinganalog signals into non-linear or reactive loads. Cables,transformers, actuators, motors and sample-hold circuitsare examples where the ability to drive diffi cult loads isrequired. Although several power buffer amplifi ers areavailable, none have been optimized for driving diffi cultloads.
上传时间： 2014-12-24
上传用户：1109003457
数字控制的交流调速系统所选用的微处理器、功率器件及产生PWM波的方法是影响交流调速系统性能好坏的直接因素。在介绍了正弦脉宽调制(SPWM)技术的基础上，设计了一种以8098单片机作为控制器，以智能功率模块IPM为开关器件的变频调速系统。通过软件编程，产生正弦脉冲宽度调制波形来控制绝缘栅双极晶体管的导通和关断，从而达到控制异步电动机转速的目的。实验结果表明，该系统可调频率调电压，稳定度高，调速范围宽，具有较强的实用价值 Abstract: AC variable speed with digital control systems used microprocessors， power devices and generate PWM wave is the direct factors of affecting the performance AC speed regulation system. On the basis of introducing the sinusoidal pulse width modulation (SPWM) technology，this paper designed variable speed system which used 8098 as a controller， intelligent power module IPM as switching device. Through software programming， resulting in sinusoidal pulse width modulation waveform to control the insulated gate bipolar transistor turn on and off， so as to achieve the purpose of speed control of induction motors. Experimental results show that the system can adjust frequency modulation voltage， high stability， wide speed range， has a strong practical value.
上传时间： 2013-11-14
上传用户：ynwbosss
为提高太阳能的利用率，以ATmega8单片机为控制核心，设计了一套光电跟踪与视日运动轨迹跟踪互补控制的双轴太阳跟踪器。该跟踪器在晴天时，利用光敏电阻采集光强判断太阳位置,控制步进电机实现光电跟踪；在阴天时，采集时钟器件PCF8583的时间信息,计算当前太阳位置来实现视日运动轨迹跟踪。实验表明：该太阳跟踪器能在不同天气状况下对太阳进行较准确地跟踪，能量接收效率提高了30%，达到充分利用太阳能的目的。 Abstract: To improve the utilization rate of solar energy，a kind of solar tracking controller which effectively combined the sun angle tracking and photo electric tracking based on ATmega8is designed.In the sunny days，the solar tracking con-troller determines the sun's position by using photosensitive resistances to collect light intensity and control stepper motors to achieve photo electric tracking，n cloudy days，it collects clock chip PCF8583time information to calculate the current position of the sun and achieve the sun angle tracking.Experimental results show the solar tracking controller accurately tracks the sun in different weather conditions，improves received energy efficiency by30%and reaches the purpose of full use of solar energy.
上传时间： 2013-10-15
上传用户：urgdil
he LPC932 can be used to create a Pulse Width Modulated PWM signal. That s an analog signal, with only 2 discrete levels, for example 0V and 5V and a constant period. The current value of this signal at a certain poiTnt of time is proportional to its Duty Cycle. That s the High Time during one period divided by the period. It can also be calculated as the average value during a particular period. That means after low pass filtering, (e.g. RC circuit) the signal becomes analog, with an actual value controlled by the microcontroller. The PWM functionality enables the LPC932 to control for example the speed of DC motors or the brightness of electric lighting.
标签： signal Modulated analog create
上传时间： 2015-05-14
上传用户：CHINA526
The LM628/LM629 are dedicated motion-control processors designed for use with a variety of DC and brushless DC servo motors
标签： motion-control processors dedicated designed
上传时间： 2014-01-22
上传用户：aa17807091
