The XA-S3 is a member of Philips Semiconductors’ XA (eXtended Architecture) family of high performance 16-bit single-chip Microcontrollers. The XA-S3 combines many powerful peripherals on one chip. Therefore, it is suited for general multipurpose high performance embedded control functions.One of the on-chip peripherals is the I2C bus interface. This report describes worked-out driver software (written in C) to program / use the I2C interface of the XA-S3. The driver software, together with a demo program and interface software routines offer the user a quick start in writing a complete I2C - XAS3 system application.
上传时间： 2013-11-10
上传用户：liaofamous
The AT89C52 is a low-power, high-performance CMOS 8-bit microcomputer with 8Kbytes of Flash programmable and erasable read only memory (PEROM). The deviceis manufactured using Atmel’s high-density nonvolatile memory technology and iscompatible with the industry-standard 80C51 and 80C52 instruction set and pinout.The on-chip Flash allows the program memory to be reprogrammed in-system or by aconventional nonvolatile memory programmer. By combining a versatile 8-bit CPUwith Flash on a monolithic chip, the Atmel AT89C52 is a powerful microcomputerwhich provides a highly-flexible and cost-effective solution to many embedded controlapplications.
上传时间： 2013-11-10
上传用户：1427796291
Introduction to Xilinx Packaging Electronic packages are interconnectable housings for semiconductor devices. The major functions of the electronic packages are to provide electrical interconnections between the IC and the board and to efficiently remove heat generated by the device. Feature sizes are constantly shrinking, resulting in increased number of transistors being packed into the device. Today's submicron technology is also enabling large-scale functional integration and system-on-a-chip solutions. In order to keep pace with these new advancements in silicon technologies, semiconductor packages have also evolved to provide improved device functionality and performance. Feature size at the device level is driving package feature sizes down to the design rules of the early transistors. To meet these demands, electronic packages must be flexible to address high pin counts, reduced pitch and form factor requirements. At the same time,packages must be reliable and cost effective.
上传时间： 2013-10-22
上传用户：ztj182002
The C8051F020/1/2/3 devices are fully integrated mixed-signal System-on-a-Chip MCUs with 64 digital I/O pins (C8051F020/2) or 32 digital I/O pins (C8051F021/3). Highlighted features are listed below; refer to Table 1.1 for specific product feature selection.
上传时间： 2013-11-08
上传用户：lwq11
LVDS、xECL、CML（低电压差分信号传输、发射级耦合逻辑、电流模式逻辑）………4多点式低电压差分信号传输(M-LVDS) ……………………………………………………8数字隔离器 ………………………………………………………………………………10RS-485/422 …………………………………………………………………………………11RS-232………………………………………………………………………………………13UART（通用异步收发机）…………………………………………………………………16CAN（控制器局域网）……………………………………………………………………18FlatLinkTM 3G ………………………………………………………………………………19SerDes（串行G 比特收发机及LVDS）……………………………………………………20DVI（数字视频接口）/PanelBusTM ………………………………………………………22TMDS（最小化传输差分信号） …………………………………………………………24USB 集线器控制器及外设器件 …………………………………………………………25USB 接口保护 ……………………………………………………………………………26USB 电源管理 ……………………………………………………………………………27PCI Express® ………………………………………………………………………………29PCI 桥接器 …………………………………………………………………………………33卡总线 (CardBus) 电源开关 ………………………………………………………………341394 (FireWire®, 火线®) ……………………………………………………………………36GTLP (Gunning Transceiver Logic Plus，体效应收发机逻辑+) ………………………………39VME（Versa Module Eurocard）总线 ………………………………………………………41时钟分配电路 ……………………………………………………………………………42交叉参考指南 ……………………………………………………………………………43器件索引 …………………………………………………………………………………47技术支持 …………………………………………………………………………………48 德州仪器（TI）为您提供了完备的接口解决方案，使得您的产品别具一格，并加速了产品面市。凭借着在高速、复合信号电路、系统级芯片 (system-on-a-chip ) 集成以及先进的产品开发工艺方面的技术专长，我们将能为您提供硅芯片、支持工具、软件和技术文档，使您能够按时的完成并将最佳的产品推向市场，同时占据一个具有竞争力的价格。本选择指南为您提供与下列器件系列有关的设计考虑因素、技术概述、产品组合图示、参数表以及资源信息：
上传时间： 2013-10-21
上传用户：Jerry_Chow
介绍了SoPC（System on a Programmable Chip）系统的概念和特点，给出了基于PLB总线的异步串行通信（UART）IP核的硬件设计和实现。通过将设计好的UART IP核集成到SoPC系统中加以验证，证明了所设计的UART IP核可以正常工作。该设计方案为其他基于SoPC系统IP核的开发提供了一定的参考。
上传时间： 2013-11-12
上传用户：894448095
The LPC1850/30/20/10 are ARM Cortex-M3 based microcontrollers for embeddedapplications. The ARM Cortex-M3 is a next generation core that offers systemenhancements such as low power consumption, enhanced debug features, and a highlevel of support block integration.The LPC1850/30/20/10 operate at CPU frequencies of up to 150 MHz. The ARMCortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture withseparate local instruction and data buses as well as a third bus for peripherals. The ARMCortex-M3 CPU also includes an internal prefetch unit that supports speculativebranching.The LPC1850/30/20/10 include up to 200 kB of on-chip SRAM data memory, a quad SPIFlash Interface (SPIFI), a State Configuration Timer (SCT) subsystem, two High-speedUSB controllers, Ethernet, LCD, an external memory controller, and multiple digital andanalog peripherals.
上传时间： 2014-12-30
上传用户：zhuoying119
On the LPC13xx, programming, erasure and re-programming of the on-chip flash can be performed using In-System Programming (ISP) via the UART serial port, and also, can be performed using In-Application Programming (IAP) calls directed by the end-user code. For In-System Programming (ISP) via the UART serial port, the ISP command handler (resides in the bootloader) allows erasure of one or more sector (s) of the on-chip flash memory.
上传时间： 2013-12-13
上传用户：lmq0059
Introduction to Xilinx Packaging Electronic packages are interconnectable housings for semiconductor devices. The major functions of the electronic packages are to provide electrical interconnections between the IC and the board and to efficiently remove heat generated by the device. Feature sizes are constantly shrinking, resulting in increased number of transistors being packed into the device. Today's submicron technology is also enabling large-scale functional integration and system-on-a-chip solutions. In order to keep pace with these new advancements in silicon technologies, semiconductor packages have also evolved to provide improved device functionality and performance. Feature size at the device level is driving package feature sizes down to the design rules of the early transistors. To meet these demands, electronic packages must be flexible to address high pin counts, reduced pitch and form factor requirements. At the same time,packages must be reliable and cost effective.
上传时间： 2013-11-20
上传用户：不懂夜的黑
The power of programmability gives industrial automation designers a highly efficient， cost-effective alternative to traditional motor control units （MCUs）。 The parallel-processing power， fast computational speeds， and connectivity versatility of Xilinx® FPGAs can accelerate the implementation of advanced motor control algorithms such as Field Oriented Control （FOC）。 Additionally， Xilinx devices lower costs with greater on-chip integration of system components and shorten latencies with high-performance digital signal processing （DSP） that can tackle compute-intensive functions such as PID Controller， Clark/Park transforms， and Space Vector PWM. The Xilinx Spartan®-6 FPGA Motor Control Development Kit gives designers an ideal starting point for evaluating time-saving， proven， motor-control reference designs. The kit also shortens the process of developing custom control capabilities， with integrated peripheral functions （Ethernet， PowerLink， and PCI® Express）， a motor-control FPGA mezzanine card （FMC） with built-in Texas Instruments motor drivers and high-precision Delta-Sigma modulators， and prototyping support for evaluating alternative front-end circuitry.
上传时间： 2013-10-28
上传用户：wujijunshi
