Cross-Correlation of several signals
标签： Cross-Correlation several signals of
上传时间： 2017-09-19
上传用户：我们的船长
互相关函数,cross-Correlation function
标签： cross-Correlation function 函数
上传时间： 2017-09-28
上传用户：huannan88
cross-Correlation function
标签： cross-Correlation function
上传时间： 2017-09-28
上传用户：kr770906
互相关函数,cross-Correlation function
标签： cross-Correlation function 函数
上传时间： 2017-09-28
上传用户：ecooo
锁定放大是微弱信号检测的重要手段。基于相关检测理论，利用开关电容的开关实现锁定放大器中乘法器的功能，提出开关电容和积分器相结合以实现相关检测的方法，并设计出一种锁定放大器。该锁定放大器将微弱信号转化为与之相关的方波，通过后续电路得到正比于被测信号的直流电平，为后续采集处理提供方便。测量数据表明锁定放大器前级可将10-6 A的电流转换为10-1 V的电压，后级通过带通滤波器级联可将信号放大1×105倍。该方法在降低噪声的同时，可对微弱信号进行放大，线性度较高、稳定性较好。 Abstract: Lock-in Amplifying（LIA）is one of important means for weak signal detection. Based on cross-Correlation detection theory， switch in the swithched capacitor was used as multiplier of LIA， and a new method of Correlation detection was proposed combining swithched capacitor with integrator. A kind of LIA was designed which can convert the weak signal to square-wave， then DC proportional to measured signal was obtained through follow-up conditioning circuit， providing convenience for signal acquisition and processing. The measured data shows that the electric current（10-6 A） can be changed into voltage（10-1 V） by LIA， and the signal is magnified 1×105 times by cascade band-pass filter. The noise is suppressed and the weak signal is amplified. It has the advantages of good linearity and stability.
上传时间： 2013-11-28
上传用户：黑漆漆
机电类比法是一种把机械量通过一定的计算等效类比为电量的方法，其在对电子机械系统的分析中应用非常广泛。它能够把一个较复杂的机械系统类比为我们熟知的电路系统来进行分析，从而使问题的分析得到简化。本文通过对振弦式传感器的分析介绍了机电类比法，并对使用电路进行了相关的分析。 Summary：The electromechanical analogy is assort of analysis which is to analogize the mechanical system by using circuit system , it applied widely in the filed of analysis the electronic-mechanical system. The analysis can take a complex mechanical system analogous to a circuitry that we well-known, which can simplify the problems. In the paper, the electro-mechanical analogy method is briefly introduced by analysis the vibrating wire sensor，and have a Correlation analysis about the circuit we used.关键词： 机电类比法 振弦式传感器 频率 振荡 反馈Keyword：electro-mechanical analogy method，vibrating wire sensor，frequency, oscillation, feedback 0 引言振弦式传感器是属于频率式传感器的一种。所谓频率式传感器就是能直接将被测量转换为振动频率信号的传感器，这类传感器一般是通过测量振弦、振筒、振梁、振膜等弹性振体或石英晶体谐振器的固有谐振频率来达到测量引起谐振频率变化的被测非电量的目的，其也称为谐振式传感器[1]。在分析该类传感器中，由于其涉及到频率，就容易让人联想到在电子技术中接触到的RLC振荡电路。因此可以尝试着用类比的方法使之对应起来分析,即机电类比法分析。
上传时间： 2013-11-16
上传用户：paladin
同步技术是跳频通信系统的关键技术之一，尤其是在快速跳频通信系统中，常规跳频通信通过同步字头携带相关码的方法来实现同步，但对于快跳频来说，由于是一跳或者多跳传输一个调制符号，难以携带相关码。对此引入双跳频图案方法，提出了一种适用于快速跳频通信系统的同步方案。采用短码携带同步信息，克服了快速跳频难以携带相关码的困难。分析了同步性能，仿真结果表明该方案同步时间短、虚警概率低、捕获概率高，同步性能可靠。 Abstract: Synchronization is one of the key techniques to frequency-hopping communication system， especially in the fast frequency hopping communication system. In conventional frequency hopping communication systems， synchronization can be achieved by synchronization-head which can be used to carry the synchronization information， but for the fast frequency hopping， Because modulation symbol is transmitted by per hop or multi-hop， it is difficult to carry the Correlation code. For the limitation of fast frequency hopping in carrying Correlation code， a fast frequency-hopping synchronization scheme with two hopping patterns is proposed. The synchronization information is carried by short code， which overcomes the difficulty of Correlation code transmission in fast frequency-hopping. The performance of the scheme is analyzed， and simulation results show that the scheme has the advantages of shorter synchronization time， lower probability of false alarm， higher probability of capture and more reliable of synchronization.
上传时间： 2013-11-23
上传用户：mpquest
Models UWB TX and RX using BPSK fifth derivative. MATLAB Release: R13 Description: This m file models a UWB system using BPSK with the fifth order derivative of the gaussian pulse with Correlation receiver and intgrator.
标签： Description derivative Release Models
上传时间： 2015-05-08
上传用户：zhliu007
A series of .c and .m files which allow one to perform univariate and bivariate wavelet analysis of discrete time series. Noother wavelet package is necessary -- everything is contained in this archive. The C-code computes the DWT and maximal overlap DWT. MATLAB routines are then used to compute such quantities as the wavelet variance, covariance, Correlation, cross-covariance and cross-Correlation. Approximate confidence intervals are available for all quantities except the cross-covariance and cross-Correlation. A set of commands is provided. For a description of this example, please see http://www.eurandom.tue.nl/whitcher/software/.
标签： univariate and bivariate analysis
上传时间： 2015-06-23
上传用户：chongcongying
The Viterbi algorithm is the same as the binary case with one main difference: The survivor sequences include the uncoded bits, which are decided at each trellis stage when selecting one of two parallel branches with the largest Correlation metric. Presently, only 8-PSK modulation is considered. Extensions to higher-order modulations can be implemented following a similar procedure.
标签： difference The algorithm the
上传时间： 2015-07-04
上传用户：qiaoyue
