main.c

来自「最新版IAR FOR ARM（EWARM）5.11中的代码例子」· C语言 代码 · 共 158 行

/******************** (C) COPYRIGHT 2003 ST Microelectronics *******************
* File Name          : main.c
* Author             : MCD Application Team
* Date First Issued  : 16/05/2003
* Description        : This program demonstrates a basic example of how to use
*                      the CAN software library.
*                      It uses the Loopback mode combined with Silent mode
*                      (self-test) so it does not need a true CAN bus to work.
********************************************************************************
* History:
* 24/05/05 : V3.0
* 30/11/04 : V2.0
* 16/05/03 : Created
*******************************************************************************
 THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
 CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
 AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
 OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
 OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
 CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

#include "71x_lib.h"

#include "main.h"


/*****************************************************************************/

// buffer for receive messages
canmsg RxCanMsg;

// array of pre-defined transmit messages
canmsg TxCanMsg[2] = {
	{ CAN_STD_ID,      0x123, 4, { 0x01, 0x02, 0x04, 0x08 } },
	{ CAN_EXT_ID, 0x12345678, 8, { 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17 } }
};

/*****************************************************************************/

void IO_Init(void)
{
	u16 uMask;

	// setup GPIO 1.11 (CAN RX pin) as input Tristate CMOS
	uMask = 1<<11;
	GPIO1->PC0 &=~uMask;
	GPIO1->PC1 |= uMask;
	GPIO1->PC2 &=~uMask;

	// setup GPIO 1.12 (CAN TX pin) as output alternate Push-pull
	uMask = 1<<12;
	GPIO1->PC0 |= uMask;
	GPIO1->PC1 |= uMask;
 	GPIO1->PC2 |= uMask;
}


void wait(void)
{
	u32 i;
	for (i=0; i<100000L; i++) {}
}


void Demo_Polling(void)
{
	// initialize the CAN at a standard bitrate, interrupts disabled
	CAN_Init(0, CAN_BITRATE_100K);

	// Loopback mode (self-test)
	CAN_EnterTestMode(CAN_TESTR_LBACK);

	// configure the message objects
	CAN_InvalidateAllMsgObj();
	CAN_SetTxMsgObj(CAN_TX_MSGOBJ, CAN_STD_ID);
	CAN_SetRxMsgObj(CAN_RX_MSGOBJ, CAN_STD_ID, 0, CAN_LAST_STD_ID, TRUE);
	

	// send a pre-defined data frame
	(void)CAN_SendMessage(CAN_TX_MSGOBJ, &TxCanMsg[0]);

	// wait until end of transmission
	CAN_WaitEndOfTx();
	

	// wait for reception of a data frame
	while (!CAN_ReceiveMessage(CAN_RX_MSGOBJ, FALSE, &RxCanMsg))
	{
		// add a time-out handling here, if necessary
	}

	
	// release the message objects
	CAN_ReleaseTxMessage(CAN_TX_MSGOBJ);
	CAN_ReleaseRxMessage(CAN_RX_MSGOBJ);

	

	// switch back into Normal mode
	CAN_LeaveTestMode();
}


void Demo_Interrupt(void)
{
	// initialize the interrupt controller
	EIC_IRQChannelConfig(CAN_IRQChannel, ENABLE);
	EIC_IRQChannelPriorityConfig(CAN_IRQChannel, 1);
	EIC_IRQConfig(ENABLE);

	// initialize the CAN at a standard bitrate, interrupts enabled
	CAN_Init(CAN_CR_IE, CAN_BITRATE_500K);

	//  Loopback mode (self-test)
	CAN_EnterTestMode(CAN_TESTR_LBACK);

	// configure the message objects
	CAN_InvalidateAllMsgObj();
	CAN_SetTxMsgObj(CAN_TX_MSGOBJ, CAN_EXT_ID);
	CAN_SetRxMsgObj(CAN_RX_MSGOBJ, CAN_EXT_ID, 0, CAN_LAST_EXT_ID, TRUE);
	

	// send a pre-defined data frame
	(void)CAN_SendMessage(CAN_TX_MSGOBJ, &TxCanMsg[1]);

	// reception and release are done in the interrupt handler

	wait();
	

	// switch back into Normal mode
	CAN_LeaveTestMode();

	// disable interrupts globally
	EIC_IRQConfig(DISABLE);
}

/*****************************************************************************/

int main(void)
{
	#ifdef DEBUG
	debug();
	#endif

	// initialize the I/O ports for the CAN pins
	IO_Init();	

	Demo_Polling();

	Demo_Interrupt();	

	return 0;
}

/******************* (C) COPYRIGHT 2003 STMicroelectronics *****END OF FILE****/